The module contains of four identical parallel filters. Each one features a knob to control the cutoff-frequency (16Hz-16kHz), the bandwith (50-0.2% octave width) and output level (-80dB ? 0dB). Each parameter of each band can also be voltage controlled. Additionally there are two additional CV inputs which can modulate the cutoff frequency and the level of all four resonators at the same time! As customary the sound is very clear but if desired you can distort the audio signal and the overload is being displayed by a red LED. The RES-4 has two switchable modes: bandpass and notch and it even has a bypass switch. Generally all Cwejman products are screened from interferences and have calibration trimmers on the backside.
Generally all Cwejman modules are screened against interferences, protected against reverse polarity and contain calibration options on the backside, see big photo.
attention: Unlike other manufacturers, the red stripe of Cwejman's flat ribbon cable indicates the positive +12V rail, not the negative one!
Audio: one input, bandpass output, notch output
common CV inputs: master level, master frequency
CV inputs per resonator: frequency, bandwidth, level.
3U Eurorack module, 24HP wide, 25mm deep
power consumption: 110mA