Doepfer A-160-2 Clock Divider II


Doepfer's second generation clock divider has been significantly enhanced when compared to the A-160: three sets of clock divisors and two output modes can be selected from and with jupers the reset behaviour and polarity of inputs and output signals can be set. This allows for adjusting the module exactly to your needs.



The upper switch offers two output modes:
  • Gate: normal behaviour of a binary divider
  • Trig: input pulse width affects output pulse widths
The bottom switch selects one of three clockdivider modes with different divisors:
  • power of two: 2, 4, 8, 16, 32, 64, 128
  • prime numbers: 2, 3, 5, 7, 11, 13, 17
  • integer: 2, 3, 4, 5, 6, 7, 8

Jumpers on the PCB give you extended options: First if the module triggers on the rising edge or the falling edge of the input clock. Second whether the clock outputs are normal or inverted.
The third option affects the reset behaviour:
  • Reset the level at the Reset input triggers the Reset
  • edge triggered: reacts on the edge of reset signal
  • positive: resets on a level above 2.5V or the rising edge
  • negative: resets on a level below 1V or the falling edge


clock input, reset input, eight clock divider outputs


3U Eurorack module, 4HP wide

0.06 kg
Article Number
External Links
Status: The article can be picked up in the shop right now / article is ready for dispatch
availability ? immediately available
€ 19% VAT excl. €83.19 € 19% VAT incl. €99.00
Excl. 19% VAT, Excl. shippingLieferzeit 1