Erica Synths - Pico Seqs (Sequential Switch)

Overview

The Pico Seqs switches over sequentially between up to four channels. Speed and direction of the changeovers can be controlled via clock and / or CV inputs. The module is usable as an allocator or combiner. It can be fed with either audio material or control voltages.

Views

Details

The Pico Seqs can be used in two ways:

1.)    Allocator: One incoming signal is fed alternately to four outputs.

2.)    Combiner: Up to four incoming signals are fed alternately to one output.

The speed, at which the module switches between sockets, is controllable via the clock input. For changing the direction, there is a CV port. It works in the range of -5 V to +5 V. If a positive voltage is applied, the jacks are passed through from top to bottom. Negative CV material reverses the direction. The amplitude of incoming control voltages affects the step selected by the Pico Seqs. 1.25 V corresponds to one step. Therefore, it is also possible to control the module with just the CV input.

connectors

One main input / output
Four switching inputs / outputs
Clock and CV input

dimensions

3U Eurorack module, 3 HP wide, 35 mm deep
Power consumption: 22 mA at +12 V and 5 mA at -12 V

Weight
0.15 kg
Article Number
ERpiSEQS

This item is discontinued or sold out and no longer available, please feel free to look for comparable new stuff in the following categories.