Analog State-Variable multimode filter based on vactrols with a wide frequency range of 20Hz-20kHz. Three separate audio outputs for the filter types are available. A potentiometer controls the cutoff frequency, a fader controls the amount of resonance.
The internal 10 step analog sequencer has an own clock generator for setting the tempo but it can be overriden by an external clock signal. The length of the sequence can be set from 2 to 10 steps by a potentiometer. An impulse at the external reset input forces the sequencer to skip to step one. The sequencer voltage can be output a separate jack so you can use the sequencer to control your modular synth.
The infrared motion sensor is a special feature controlling the cutoff frequency by default but it can be patched to other parameters. This allows for playing and controlling the filter and sequencer by gestures, with feet or hands.
A rugged big bypass switch de/-activates the filter. The sensitivity of the CV inputs and outputs as well as the sensitivity of the motion sensor can be adjusted with attenuators which are mounted on the back of the pedal.
One audio input; three audio outputs for low-, band- and highpass.
CV inputs for cutoff and resonance. Clock input for sequencer, reset trigger input for sequencer, IR sensor output. Sequencer CV output
input for supplied external 9V DC power adapter (500mA min, center polarity negative)
powder coated aluminium housing with silkscreened thext and wood sides
dimensions: 150 x 225 x 55mm (WxDxH)
This item is discontinued or sold out and no longer available, please feel free to look for comparable new stuff in the following categories.