Items 151 to 257 of 257 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. Doepfer A-132-2 Quad VCA

    The module A-132-2 is a quad VCA with a linear curve. Although it provides you with four inputs and four outputs you can control their level simultaneously only, with a potentiometer and control voltages.

    Details
    Doepfer A-132-2  Quad VCA
    availability ? immediately available
    € 19% VAT excl. €63.03 € 19% VAT incl. €75.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Doepfer A-132-1 dual low-cost VCA

    The A-132 is a simple module housing two identical low-cost VCA units with linear characteristic. The main purpose is controlling the intensity of control voltages but audio can be controlled if necessary.

    Details
    Doepfer A-132-1  Dual Low cost VCA
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Doepfer A-131 VCA (exponential)

    The A-131 is a VCA with a exponential characteristic and is intended for controlling the level of audio signals by voltages. Improved version since 2013

    Details
    Doepfer A-131 VCA (logarithmic)
    availability ? immediately available
    € 19% VAT excl. €63.03 € 19% VAT incl. €75.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Doepfer A-130 VCA (linear)

    The A-130 is a VCA with linear characteristic, thus primarily intended for controlling the level of CVs. It offers two signal inputs and a output with adjustable volume. amplification is set with a Gain control and two modulation inputs.

    Details
    Doepfer A-130  VCA (linear)
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Doepfer A-128 Fixed Filterbank

    Fixed filterbank with a low pass, thirteen bandpass filters and one high pass. Each filter has a level control which even enables you to mute the specifical band.

    Details
    Doepfer A-128  Fixed Filterbank
    availability ? immediately available
    € 19% VAT excl. €142.86 € 19% VAT incl. €170.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Doepfer A-127 VC triple resonator

    Three parallel, voltage controlled, resonant bandpass filters (each switchable to lowpass per jumper), each with an own LFO or CV input with attenuator. Separate outputs for each filter and a mixed output. Very well suitable for living filtering or as a formant filter with modulation (unlike A-104).

    Details
    Doepfer A-127  VC Triple Resonator
    availability ? immediately available
    € 19% VAT excl. €155.46 € 19% VAT incl. €185.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Doepfer A-125 VC Phaser

    A classic voltage controlled phase shifter, also called a phaser. It features as shift-CV input with attenuator, controls for volume of the audio signal, manual phase shift, resonance and wet/dry mix.

    Details
    Doepfer A-125  VC Phaser
    availability ? immediately available
    € 19% VAT excl. €71.43 € 19% VAT incl. €85.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Doepfer A-124 Wasp Filter

    A multimode filter is based on a very special filter circuit used in the EPD Wasp, an English synthesizer of the late 1970ies. The sound is full of character, dirty, with an unstable resonance and a trend to distort. Who is in search of a very aggressive, sick filter definitely should take the A-124 into consideration.

    Details
    Doepfer A-124  Wasp Filter
    availability ? immediately available
    € 19% VAT excl. €71.43 € 19% VAT incl. €85.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Doepfer A-122 24dB Lowpass (CEM)

    24dB low pass filter based on a Curtis filter circuit which is known from many polyphonic 1980s synthesizers. It features voltage control of cutoff frequency and resonance; self-oscillation is possible, too.

    Details
    Doepfer A-122  24dB Lowpass CEM
    availability ? immediately available
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. Doepfer A-101-3 Vactrol Modular Phaser

    Very complex modular 12-stage phase shifter with separate in- and outputs for all phaser stages which allows eg. flexible feedback patching. The use of vactrols makes the A-101-3 sounds very soft.

    Details
    Doepfer A-101-3  Vactrol Modular Phaser
    availability ? immediately available
    € 19% VAT excl. €268.91 € 19% VAT incl. €320.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. Doepfer A-101-2 Vactrol Lowpass Gate

    Vactrol based combination of resonant 12dB lowpass filter and/or VCA. Inspired by the Buchla 292.

    Details
    Doepfer A-101-2  Vactrol Lowpass Gate
    availability ? immediately available
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. Doepfer A-101-1 Vactrol Steiner Filter

    Vactrol-based multimode filter based on a schematic by Nyle Steiner. Separate inputs for lowpass, bandpass and highpass.

    Details
    Doepfer A-101-1  Vactrol Steiner Filter
    availability ? immediately available
    € 19% VAT excl. €117.65 € 19% VAT incl. €140.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. flat ribbon cable 16pin-to-16pin

    Flat ribbon cable for connecting Eurorack modules to a busboard. Connectors with 16 pins on both sides of the cable.

    Details
    Doepfer Flachbandkabel 16 pin auf 16 pin
    availability ? immediately available
    € 19% VAT excl. €4.20 € 19% VAT incl. €5.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. flat ribbon cable 10pin-to-16pin

    Flat ribbon cable for connecting Eurorack modules to a busboard. One plug with 10 pins on the one side and a 16pin connector on the other.

    Details
    Doepfer Flachbandkabel 10 pin auf 16 pin
    availability ? immediately available
    € 19% VAT excl. €4.20 € 19% VAT incl. €5.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Doepfer A-100 Basic System 2, P6 (PSU3)

    The A-100 Basic System 2 contains all the components of BS1, but provides the Midi interface for those who want to integrate the synth into their MIDI setup. MIDI to CV/Gate connections are sent via an internal buss to the corresponding receivers (A-110 VCOs and A-140 ADSRs) unless connections with patch cords are made.

    Nevertheless, prior to buying a per-configured basic system we'd rather give you a personal advice regarding your synth setup.

    Details
    Doepfer A-100 Basis-System 2, Midi, 230V koffer P6
    availability ? will be ordered on request
    € 19% VAT excl. €1,823.53 € 19% VAT incl. €2,170.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Doepfer A-100 Basic System 2, 19" (PSU3)

    The A-100 Basic System 2 contains all the components of BS1, but provides the Midi interface for those who want to integrate the synth into their MIDI setup. MIDI to CV/Gate connections are sent via an internal bus to the corresponding receivers (A-110 VCOs and A-140 ADSRs) unless connections with patch cords are made.

    Nevertheless, prior to buying a per-configured basic system we´d rather give you a personal advice regarding your synth setup.

    Details
    Doepfer A-100 Basis-System 2, Midi, 230V im Rack
    availability ? shortly avaliable
    € 19% VAT excl. €1,823.53 € 19% VAT incl. €2,170.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. Doepfer A-100 Basic System 1, LC9 (PSU3)

    Doepfer's basic System 1 is a good allrounder complete system for classic subtractive synthesis and more. If has a MIDI/CV interface, sample & hold, clock processors and more. The enclosure used here is a wooden low-cost case LC9, which has a third, unused row for modiles - perfect for expanding the system!

    Details
    Doepfer A-100 Basis-System 1, LC9
    availability ? shortly avaliable
    € 19% VAT excl. €1,689.08 € 19% VAT incl. €2,010.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Doepfer A-100 Basic-System 1, 19" (PSU3)

    The BS1 is one of many exemplary systems which the manufacturer configured himself and offers at a special price. In this case the classic use of the modular system as an analogue synthesizer with typical or known sound forms is the main application. The fact that this system, thanks to modules like the trigger delay, already exceeds the possibility of hardwired comparable models by far, is self-understandable due to its great value components. We are happy to recommend a personal composition of a complete 6-unit framework for beginners. And we’re likewise happy to help with the enduring work of researching set ups.

    Details
    Doepfer A-100 Basis-System 1, 230V, 19"-Rack
    availability ? shortly avaliable
    € 19% VAT excl. €1,773.11 € 19% VAT incl. €2,110.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. Doepfer backpanel 84HP incl. power inlet

    back plate for power supply. Without PSU; with power inlet, fuse holder, power switch

    Details
    Doepfer Rückplatte mit Netzeingang V2 1
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. Doepfer back panel 84HP

    Back plate for 3U Eurorack. 84hp wide.

    Without power inlet and mounting holes for the power supply (picture is not 100% correct, sorry).

    Details
    Doepfer Rückplatte 84TE 1
    availability ? immediately available
    € 19% VAT excl. €16.81 € 19% VAT incl. €20.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. Doepfer blank panel 42HP (213mm)

    blank panel 42HP (213mm), raw aluminium

    Details
    Doepfer Blindplatte 42TE - 213mm
    availability ? immediately available
    € 19% VAT excl. €8.40 € 19% VAT incl. €10.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Doepfer blank panel 8TE / 41mm

    blank panel 8TE (41mm) raw aluminium

    Details
    Doepfer Blindplatte 8TE / 41mm
    availability ? immediately available
    € 19% VAT excl. €3.36 € 19% VAT incl. €4.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Doepfer blank panel 4HP (20mm)

    blank panel 4HP (20mm), raw aluminium

    Details
    Doepfer Blindplatte 4TE / 20mm
    availability ? immediately available
    € 19% VAT excl. €2.94 € 19% VAT incl. €3.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. Doepfer Blindplatte 2HP / 10mm

    blank panel 2HP (10mm), raw aluminium

    Details
    Doepfer Blindplatte 2TE - 10mm
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Doepfer blank panel 1.5HP (7.6mm)

    blank panel 1,5HP (~7,5mm), raw aluminium

    Used to fill the gap between Analogue Solutions modules and others in a Eurorack frame such as the suitcase versions or to fill any other unusual gap in your systems.

    Details
    Doepfer Blindplatte 1,5TE
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  26. Doepfer blank panel 1HP (5mm)

    blank panel 1HP (5mm), raw aluminium

    Details
    Doepfer Blindplatte 1TE
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  27. Doepfer internes CV/Gate Buskabel

    Connector cable to have the internal CV/Gate bus available at two (or mode) bus boards.

    Details
    Doepfer internes CV/Gate Buskabel
    availability ? immediately available
    € 19% VAT excl. €6.30 € 19% VAT incl. €7.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  28. Doepfer Patch-Kabel 15cm (yellow)

    Patch cord with moulded 3,5mm jacks. ~15cm long, color: yellow

    Details
    Doepfer Patch-Kabel 15cm (yellow)
    availability ? immediately available
    € 19% VAT excl. €2.10 € 19% VAT incl. €2.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  29. Doepfer Monster Case, 9U

    The medium sized Monster flight case with three rows for mounting 3U Eurorack-modules includes two strong universal power supplies, six bus boards and three rows each with 168HP width. Total: 504HP module space.

    Details
    Doepfer Monsterkoffer einfach 504TE
    availability ? immediately available
    € 19% VAT excl. €831.93 € 19% VAT incl. €990.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  30. Doepfer Monster Case, 6 U

    The "small" monster flight case for mounting 3U Eurorack-modules. It offers two rows, each with a width of 168HP for total module space of 336HP. It is equipped with two strong power supplies which can be used all over the world.

    Details
    Doepfer Monsterkoffer einfach 336TE
    availability ? immediately available
    € 19% VAT excl. €697.48 € 19% VAT incl. €830.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  31. Doepfer Monster Case, 12U

    The BIG monster flight case for mounting 3U Eurorack modules. Four rows each with 168HP for a total of 672HP module space. It is equipped with four powerful power supplies which provide all your hungry modules with enough juice.

    Details
    Doepfer Monsterkoffer einfach 672TE
    availability ? immediately available
    € 19% VAT excl. €1,252.10 € 19% VAT incl. €1,490.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  32. Doepfer Monster Base (PSU3)

    The Monster Base is a case that can be used as a base for any Monster Case or two standard suitcases / low cost cabinets. It offers two rows with 168 HP space each; one row is horizontal, the other with a 45° slope. The enclosure includes two strong power supplies of PSU3 type and four bus boards.

    Details
    Doepfer Monster Base mit 336 TE
    availability ? immediately available
    € 19% VAT excl. €739.50 € 19% VAT incl. €880.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  33. Doepfer A-100MNT PSU Trafo V.2 200mA

    Doepfer miniature power supply with external wall wart. New version 2.

    It provides 200mA at +/-12V and 50mA at +5V. Includes small bus board for connecting up to four modules.

    Details
    Doepfer A-100MNT PSU  Trafo V.2  200mA
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  34. Doepfer Mini Case black

    Minature wooden case, unpainted. Includes external power supply and it offers 32HP module space for up to 4 powered Eurorack modules. Maximal allowed current draw: 200mA

    Details
    Doepfer Mini Case schwarz/black 32TE
    availability ? immediately available
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  35. Doepfer Mini Case raw

    minature wooden case, unpainted. Includes external transformer (wall wart). 32HP module space for eurorack modules. maximal allowed current draw: 200mA

    Details
    Doepfer Mini Case roh/raw 32TE
    availability ? immediately available
    € 19% VAT excl. €71.43 € 19% VAT incl. €85.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  36. Doepfer DIY-Kit #1 incl. Trafo 1200mA

    The Doepfer DIY-Kit is a solution for an easy Eurorack do-it-yourself power supply. The external transformer is housed in a plastic case so the 240V connectors are shielded this means it´s electrically safe and you don´t need an electrician to connect the power distribution.

    Details
    Doepfer DIY-Kit #1  incl. Trafo 1200mA
    availability ? immediately available
    € 19% VAT excl. €126.05 € 19% VAT incl. €150.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  37. availability ? immediately available
    € 19% VAT excl. €2.94 € 19% VAT incl. €3.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  38. Doepfer Patch-Kabel 80cm (red)

    Patch cord with moulded 3,5mm jacks

    80cm long, color: red

    Details
    Doepfer Patch-Kabel 80cm (red)
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  39. Doepfer Patch-Kabel 50cm mit Winkel (orange)

    Patch cord with moulded 3,5mm jacks One jack is straight, the other one is angled 90° 50cm long, color: orange Details
    Doepfer Patch-Kabel 50cm mit Winkel (orange)
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  40. Doepfer Patch-Kabel 50cm (grey)

    Patch cord with moulded 3,5mm jacks

    50cm long, color: grey

    Details
    Doepfer Patch-Kabel 50cm (grey)
    availability ? immediately available
    € 19% VAT excl. €2.10 € 19% VAT incl. €2.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  41. Doepfer Patch-Kabel 30cm (black)

    Patch cord with moulded 3,5mm jacks

    30cm long, color: black

    Details
    Doepfer Patch-Kabel 30cm (black)
    availability ? immediately available
    € 19% VAT excl. €2.10 € 19% VAT incl. €2.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  42. Doepfer Patch-Kabel 200cm (gruen)

    Patchkabel mit vergossenen 3,5mm-Steckern

    200cm lang, Farbe: grün

    Details
    Doepfer Patch-Kabel 200cm (gruen)
    availability ? immediately available
    € 19% VAT excl. €3.78 € 19% VAT incl. €4.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  43. Doepfer A-100 5V adaptor

    5V adaptor for supplying A-113, A-190-1, A-191, some Analogue Systems modules (eg. Comb Filter)  and some Analogue Solutions modules (SD99 and sequencers) with an additional 5V voltage. Provides a maximum current of 100mA.

    CAUTION: Use only ONE 5V-adaptor per bus board, even if you have several consuming modules installed!

    Details
    Doepfer A-100  5V-Adapter
    availability ? immediately available
    € 19% VAT excl. €12.61 € 19% VAT incl. €15.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  44. Doepfer A-136 Distortion/Waveshaper

    Distortion / Waveshaper module for dynamic distortion of audio signals with extended settings. The applications of this module are waveform modifications and distortion like clipping and waveshaping of audio signals and control voltages (e.g. LFO).

    Details
    Doepfer A-136  Distortion/Waveshaper
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  45. Doepfer A-192 CV-to-Midi interface

    A-192 converts 16 control voltages into 16 arbitrary MIDI controllers on arbitrary MIDI channels.  128 different assignments (Presets) of the 16 CV inputs to MIDI controller messages are available.  MIDI messages appearing the MIDI Input are merged to the MIDI controller messages generated by the A-192.

    The snapshot button transmits the 16 momentary states of the 16 inputs as MIDI controller messages.

    Details
    Doepfer A-192-1  CV-to-Midi interface
    availability ? immediately available
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  46. Doepfer A-183-1 dual passive attenuator

    dual passive attenuator very senseful for systems with modular combinations of different manufacturers.. where you have internal attenuators sometimes at the output and sometimes at the input stage.

    Details
    Doepfer A-183-1 dual passive attenuator
    availability ? immediately available
    € 19% VAT excl. €33.61 € 19% VAT incl. €40.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  47. Doepfer A-182-1 Switched Multiple 3,5mm

    Multiplier module. The module differs from the A-180 as you can find a rocker switch side by side to the socket which assigns the incoming signal to buss 1 or buss 2. All sockets which have the switch in the same position are connected together. So you can connect easily 3 and 5 sockets together or 4 and 4 and configure the multiple as you like.

    Details
    Doepfer A-182-1 Switched Multiple 3,5mm
    availability ? shortly avaliable
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  48. Doepfer A-181 Multiple 2x 6,3mm - 3,5mm

    Passive adaptor module that converts from 6,3mm (1/4") jack to 3,5mm (1/8"). Either 1x 6,3mm mono --> 2x 3,5mm mono (like a small multiple) or 1x 6,3mm stereo --> 2x 3,5mm mono.

    Details
    Doepfer A-181  Multiple 2x 6,3mm - 3,5mm
    availability ? immediately available
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  49. Doepfer A-178 Theremin Voltage Source

    Theremin controller module for generating a variable control voltage by approaching/removing hand to/from an antenna. A gate signal can be generated, too if the voltage exceeds a certain threshold set by the according control. For emulating a thrermin you need two A-178s: one for the pitch and one for the volume.

    Details
    Doepfer A-178 Theremin Voltage Source
    availability ? immediately available
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  50. Doepfer A-177-2 foot controller

    To control modular parameters easily over footpedals the A-177 is a brilliant help: A connected foot controller in the upper switch generates a control VC, at the other one a dual footswitch can generate two independent trigger/gate voltages for instance. The module has been optimized for the fatar products FP-5 and VFP2, that you can also get from us.

    Details
    Doepfer A-177-2  Foot Controller
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  51. Doepfer A-176 Control Voltage Source

    Three independent voltage sources that produce constant (control) voltages. Two of the voltage generators have a control for fine adjustment what is very practical if you want to tune VCOs exaclty. With a little jumper you can decide for each of the three sources if it gives out -2,5v to 2,5v or 0 to 5V !

    Details
    Doepfer A-176  Control Voltage Source
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  52. Doepfer A-175 Dual Voltage Inverter

    The dual voltage inverter is exactly what it says it is: two identical inverters, which will take a voltage and output it in an inverted form - so that an input of eg. 5V will be output as -5V at the "inv out". The second input can give you the unprocessed original signal, too. Two LEDs give a visual indication of the (positive or negative) output signal.

    Details
    Doepfer A-175  Dual Voltage Inverter
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  53. Doepfer A-174-2 Wheels

    A-174-2 is a modulation wheel module with two wheels. While the left one is centered and spring-loaded like a pitch bend wheel, the right one acts like a classic modulation wheel.

    Details
    Doepfer A-174-2  Wheels
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  54. Doepfer A-172 Max./Min. Selector

    Module for processing/mixing of control voltages. The signals at the four inputs are being mixed together, the outputs give you the current maximum resp. minimum voltage of the sum of the four input signals.

    Details
    Doepfer A-172 Max./Min. Selector
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  55. Doepfer A-170 Dual Slew Limiter

    Two separate slew limiters for generating portamento effects. Abrupt changes of a signal can be "smoothed" this way. The upper slew limiter has one common control while the upper has separate controls for setting the rising and falling slew time.

    Details
    Doepfer A-170  Dual Slew Limiter
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  56. Doepfer A-167 Analog Comparator

    Analog comparator that compares two analog voltages with each other and derives a gate signal. Either two external signals can be compared or one external voltage with the internally set value. The module can also be used as a subtractor or a offset generator.

    Details
    Doepfer A-167  Analog Comator
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  57. Doepfer A-166 Logic Module

    In this module we find two sections which work with the principles of Boolean Logic. Each has three inputs with their logic states ("1" = high / "0" = low) being compared, combined and finally output at three logic outputs: AND, OR and exclusive OR (EXOR). In addition there are two logic inverters for switching the logic states.
    The A-166 is a really good module for combining and linking digital signals like clocks, triggers and gates.

    Details
    Doepfer A-166  Logic Module
    availability ? immediately available
    € 19% VAT excl. €92.44 € 19% VAT incl. €110.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  58. Doepfer A-183-2 VC offset gen./attenuator/pol

    As an offset generator the module supplies a voltage from 0 to 5 or from -5 to 5V, the attenuator can set an incoming signal to be added to the offset voltage, this signal can be inverted in addition making the tiny thing a polarizer module in addition.

    Details
    Doepfer A-183-2  Offset / Att. / Polarizer
    availability ? immediately available
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  59. Doepfer A-183-3 DC coupled amplifier

    To make the uncounted modules of different manufacturers and/or other units compatible with each other this module has been created: The control voltages are sometimes needed with 5 Volts or even higher to make an envelope start or a sequencer run so here you can lift outgoing lower voltages to that certain level. It can alo be used to amplify your audio signals.

    Details
    Doepfer A-183-3 DC coupled amplifier
    availability ? immediately available
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  60. Doepfer A-190-3 USB to CV/Gate

    Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has 4 analog control voltage outputs (CV1...4) and one gate output. A-190-3 is the modular version of Doepfer´s Dark Link standalone interface.

    Details
    Doepfer A-190-3 USB und MIDI-CV
    availability ? immediately available
    € 19% VAT excl. €109.24 € 19% VAT incl. €130.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  61. Doepfer A-190-2 low cost MIDI/CV interface

    The A-190-2 is a compact, economically priced alternative to the A-190-1. It can be used in all cases where the additional features of the A-190-1 are not required (e.g. clock output, start/stop output). A-190-2 is the modular version of the established MCV4 with some changes to adapt the modular system.

    Details
    Doepfer A-190-2 low cost MIDI/CV interf.
    availability ? immediately available
    € 19% VAT excl. €92.44 € 19% VAT incl. €110.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  62. Doepfer A-189-1 VC - bit crusher

    The A-189-1 is the first derivative of the universal AD/DA module. It offers several voltage controlled algorithmic functions like voltage controlled bit crunching, bit shifting (with/without carry over), bit exchange, rectifying, absolute value and calculating operations like addition, subtraction, multiplication or division.

    Details
    Doepfer A-189-1 VC - bit crusher
    availability ? immediately available
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  63. Doepfer A-188-2 Tapped BBD Modul

    Delay based on a bucket brigade device (BBD). Six parallel delay taps with single outputs.

    The taps allow maximal delay times of 396, 662, 1194, 1726, 2790 and 3328ms. There are two sections, each allows a individual mixture of the delay taps at mix outputs that have a dry/wet control. CV control of common delay time; complex positive/negative feedback.

    Details
    Doepfer A-188-2  Tapped BBD Modul
    availability ? immediately available
    € 19% VAT excl. €193.28 € 19% VAT incl. €230.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  64. Doepfer A-188-1Y BBD (256 Stages)

    The A-188-1 series bases on a co-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.
    The version with 256 stages provides a delay time of 0.51 - 256ms and is great for Karpluss-Strong synthesis.

    Details
    Doepfer A-188-1Y  BBD 256 Stages
    availability ? immediately available
    € 19% VAT excl. €134.45 € 19% VAT incl. €160.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  65. Doepfer A-188-1X BBD (128 Stages)

    The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.
    The version with 128 stages provides a delay time of 0.26 - 128ms and is great for Karpluss-Strong synthesis.

    Details
    Doepfer A-188-1X  BBD 128 Stages
    availability ? immediately available
    € 19% VAT excl. €126.05 € 19% VAT incl. €150.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  66. Doepfer A-188-1D BBD (4096 Stages)

    The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.
    The version with 4096 stages provides a delay time of 8.19 - 4096 ms.

    Details
    Doepfer A-188-1D  BBD 4096 Stages
    availability ? immediately available
    € 19% VAT excl. €138.66 € 19% VAT incl. €165.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  67. Doepfer A-188-1C BBD (2048 Stages)

    The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital delays of the 1980s.
    The version with 2048 stages provides a delay time range of 4.10 - 2048ms.

    Details
    Doepfer A-188-1C  BBD 2048 Stages
    availability ? immediately available
    € 19% VAT excl. €109.24 € 19% VAT incl. €130.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  68. Doepfer A-188-1B BBD (1024 Stages)

    The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.
    The version with 1024 stages provides a delay time of 2.05- 1024 ms.

    Details
    Doepfer A-188-1B  BBD 1024 Stages
    availability ? immediately available
    € 19% VAT excl. €109.24 € 19% VAT incl. €130.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  69. Doepfer A-188-1A BBD (512 Stages)

    The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital delays of the 1980s.
    The version with 512 stages provides a delay time of 1.02 - 512 ms.

    Details
    Doepfer A-188-1A  BBD 512 Stages--9-
    availability ? immediately available
    € 19% VAT excl. €117.65 € 19% VAT incl. €140.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  70. Doepfer A-187-1 VC DSP Effects

    Module A-187-1 is a DSP based effects module with voltage control of parameters of effects like delay, reverb, pitch shift or equalizer.

    Details
    Doepfer A-187-1 Voltage Controlled DSP Effects--9-
    availability ? immediately available
    € 19% VAT excl. €226.89 € 19% VAT incl. €270.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  71. Doepfer A-186-1 Gate/Trigger Combiner

    This small module combines up to seven gate or trigger signals and sends them to one output; basically it´s a simple passive mixer for gate signals.

    If all seven inputs are "low" there is no gate at the output. When one or more inputs switch to "high", a gate signal occurs at the output.

    Details
    Doepfer A-186-1  Gate/Trigger Combiner
    availability ? immediately available
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  72. Doepfer A-185-2 Precision Adder / Bus Access

    The A-185-2 allows you to send up to four control voltages simultaneously (e.g. sequencer and keyboard for transposing a pattern) to one or more VCOs. There are three buffered outputs and an inverted one.

    Details
    Doepfer A-185-2  Precision Adder / Bus Access
    availability ? immediately available
    € 19% VAT excl. €63.03 € 19% VAT incl. €75.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  73. Doepfer A-185-1 Bus Access Modul

    The Bus Access module makes possible to "write" external CV/Gate signals to the internal A-100 bus via 3,5mm sockets. This is recommended when using an external MIDI/CV interface, if you run many VCOs of if you like to have the same bus on several A-100 frames. Additionally you can split the input signal via four buffered outputs.

    Details
    Doepfer A-185-1  Bus Access Modul
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  74. Doepfer A-165 Dual Trigger Modifier

    Two individual inverters and modifiers for logic signals like triggers, gates and clocks. The module is used for adapting levels and logic states to ther units like external sequencers as well.

    Details
    Doepfer A-165  Dual trigger modifier
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  75. Doepfer A-164-1 Manual Gate

    Module with three buttons that provide a gate signal at their outputs when pressed.

    Details
    Doepfer A-164-1  Manual Gate
    availability ? shortly avaliable
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  76. Doepfer A-163 VC Divider

    Voltage controlled frequency divider with divisors ranging from 1 to aaproximately 20. Even odd divisors are possible! It has a manual control for changing the divisor factor and CV input with polarizer (attenuator / inverter). The output signal is a square wave.

    Details
    Doepfer A-163  VC Divider
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  77. Doepfer A-143-4 Quad VC-LFO/VCO

    The A-143-4 contains four voltage controlled LFOs / VCOs with triangle and rectangle outputs in one single module.

    Details
    Doepfer A-143-4 Quad VC-LFO/VCO
    availability ? immediately available
    € 19% VAT excl. €189.08 € 19% VAT incl. €225.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  78. Doepfer A-143-3 Quad LFO

    A workhorse for modulations with four identical simple LFOs oscillating between 1/30Hz and 4-5 kHz. Each LFO features a frequency control, a switch for the time range and outputs for triangle, rectangle and rising sawtooth.

    Details
    Doepfer A-143-3  Quad LFO
    availability ? immediately available
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  79. Doepfer A-143-2 Quad ADSR

    Quad ADSR type envelope generator with time ranges of 0.2ms to 5min. Each ADSR units has a gate- and a retrigger input as well as one output and a time range switch.
    Quite interesting are the "end-of" outputs which provide you with gate signals after the corresponding time stage has been finished. You can use this gate signal to start further ADSRs and thus for creating complex envelopes, pseudo LFOs etc.

    Details
    Doepfer A-143-2  Quad ADSR
    availability ? immediately available
    € 19% VAT excl. €176.47 € 19% VAT incl. €210.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  80. Doepfer A-143-1 Complex Envelope Generator

    The four envelopes can be chained for creating a multi-stage envelope available at the Mix output. You can determine at which threshold if the decay stage the next envelope will be started. A bi-polar attenuator at each envelope determines if it wil be added normally or inverted to the mix.

    Details
    Doepfer A-143-1  Complex Envelope Gen.
    availability ? immediately available
    € 19% VAT excl. €159.66 € 19% VAT incl. €190.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  81. Doepfer A-142-4 Quad Decay

    The module A-142-4 consists of four envelopes with exactly one parameter: decay

    Details
    Doepfer A-142-4 Quad Decay
    availability ? immediately available
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  82. Doepfer A-142-1 VC Decay/Gate

    Voltage controlled envelope generator with one parameter: decay. Due to additional outputs for positive and negative gate with adjustable threshold the module can be also used as a voltage controlled trigger delay.

    Details
    Doepfer A-142-1  VC Decay/Gate
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  83. Doepfer A-140 ADSR

    The A-140 is a fast ADSR type envelope generator with both positive and inverted outputs as well as a retrigger input. The coarse time range of the A-140 can be selected from three settings by a rocker switch.

    Details
    Doepfer A-140  ADSR
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  84. Doepfer A-138m 4x4 Matrix Mixer

    The A-138m is a 4x4 mix matrix where you can mix up to four incoming signals in all possible variations to four outgoing switches. The Signals can be audio and/or voltage controls.

    Details
    Doepfer A-138m 4x4 Matrix Mixer
    availability ? immediately available
    € 19% VAT excl. €117.65 € 19% VAT incl. €140.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  85. Doepfer A-138e quad X-fader / Mixer / Polarizer

    A-138e ist a multifunctional module with four identical units for mixing and fading signals.

    Details
    Doepfer A-138e quad X-fade / Mix / Polarize
    availability ? immediately available
    € 19% VAT excl. €71.43 € 19% VAT incl. €85.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  86. Doepfer A-138d Crossfader / FX insert

    The A-138d primarily is used for crossfading between two modular signals. On the other hand you can used it for inserting stompboxes or other effects into your modular system.

    Details
    Doepfer A-138d  Crossfader / FX insert
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  87. Doepfer A-138c Polarizing Mixer

    Four-channel mixer module which can add signals (positive amplification) or subtract (negative amplification) them from the output signal. Additionally there´s a polarizer at the output which controls the output signal. The module is intended for adding/subtracting control voltages, but interesting, discreet effects can be achieved with audio signals shifted in phase.

    Details
    Doepfer A-138c  Polarizing Mixer
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  88. Doepfer A-138b Mixer exponential

    Logarithmic mixer for mixing up to 4 signals to one output. Works best with audio, but CVs are possible, too. If there´s no jack in input 1, you can use the level-control 1 as an offset control.

    Details
    Doepfer A-138b  Mixer logarithmic
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  89. Doepfer A-138a Mixer linear

    Linear mixer for mixing up to 4 signals to one output. Works best with CVs, but audio is possible, too. If there´s no jack in input 1, you can use the level control 1 as an offset control.

    Details
    Doepfer A-138a  Mixer linear
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  90. Doepfer A-137-2 Wave Multiplier 2

    The Wave Multiplier 2 takes a wave at the input and creates four phase-shifted copies of that signal at the output. Each of the four copies can be individually shifted in phase what creates living sound resembling four oscillators. This effect is called wave animation.

    Details
    Doepfer A-137-2  Wave Multiplier 2
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  91. Doepfer A-143-9 VC Quadrature LFO

    Voltage controlled sine-LFO with four separate, phase shifted outputs: 0° (sine), 90° (cosine), 180° (inverted sine) and 270° (inverted cosine). Suitable for FM, cross-fadings, modulations in opposite directions or applications, where a pure sine is needed like oscillator for a frequency shifter.

    Details
    Doepfer A-143-9  VC Quadrature LFO
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  92. Doepfer A-144 Morph Controller

    The A-144 morphing controller is a module for generating control voltages which are to be used in a morphing application, especially with a voltage controlled mixer like the A-135.

    Details
    Doepfer A-144  Morph Controller
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  93. Doepfer A-162 Dual Trigger Delay

    Dual circuitry for delaying trigger signals. Each of the units makes it possible to delay the onset of a trigger pulse and also change its length.

    Details
    Doepfer A-162  Dual Trigger Delay
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  94. Doepfer A-161 Clock Sequencer

    The module A-161 clock sequencer is an additional module for the A-160 (which is needed for operation). It sequentially switches between its eight outputs. It enables you to create short analogue sequences or to trigger envelope generators periodically. A reset on the A-160 has also an effect on the A-161.

    Details
    Doepfer A-161  Clock Sequencer
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  95. Doepfer A-160-1 Clock Divider

    The A-160-1 is a frequency divider for clock, trigger and gate signals, designed to be a source of lower frequencies, particularly for rhythmical uses. The available dividers are exclusively even numbers. Additionaly there is a reset input which sets all outputs to "zero".

    Details
    Doepfer A-160 Clock Divider
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  96. Doepfer A-156 Dual Quantizer

    The module A-156 is a dual quantizer for CVs, converting a continuous positive input voltage into a stepped output voltage. The steps have an interval of exactly 1/12V, ergo one semitone with the 1V/oct characteristic. This makes tuning an analog sequencer pretty easy but the module can of course quantise other control voltages like envelopes, noise or random signals.

    Details
    Doepfer A-156  Dual Quantizer--9-
    availability ? immediately available
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  97. Doepfer A-155 Analog/Trigger Sequencer

    Analog sequencer for CVs and trigger/gates. Two CV rows, each with selectable voltage range, glide and sample & hold optons. Three trigger rows and a one gate row. Logic inputs for clock, reset, start and stop. It's even possible to insert external signals per step instead, overriding the CV generated by the 2nd row's potentiometer.

    Details
    Doepfer A-155  Analog/Trigger Sequencer
    availability ? immediately available
    € 19% VAT excl. €252.10 € 19% VAT incl. €300.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  98. Doepfer A-154 Sequencer Controller

    The A-154 is an additional module for Doepfer's Eurorack sequencer a-155 and it expands it by a number of very interesting functions like new modes of operation which can be selected by CV, including an one-shop option and even voltage controlled step addressing. A voltage controllable clock generator with variable pulse width is included as well. It's even possible to connect and control two A-155s either in parallel or in series for creating a 16-step sequencer.

    Details
    Doepfer A-154  Sequencer Controller
    availability ? immediately available
    € 19% VAT excl. €147.06 € 19% VAT incl. €175.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  99. Doepfer A-152 Voltage addressed S&H / Switch

    The module A-152 is a complex switch / multiplexer unit with additional features:

    1. eight-fold bidirectional electronic switch (in- and outputs can be swapped) with the possibility to address the stages with a CV or to step from one stage to the next with a clock signal. All signals of the a-100 can be switched, even audio.
    2. eight-fold track-and-hold

    Details
    Doepfer A-152  Voltg. addressed SundH/Switch
    availability ? immediately available
    € 19% VAT excl. €117.65 € 19% VAT incl. €140.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  100. Doepfer A-151 Quad Sequential Switch

    Electronic switch with up to four steps. At each trigger impulse the input signal is being switched sequentially form the common input to the four inputs. The module works bi-directionally.

    Details
    Doepfer A-151  Quad Sequential Switch
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  101. Doepfer A-150 Dual VCS

    Two independent voltage controlled switches in one module. You can route signals by switching. Either you switch one input signal between two outputs - or two input signals between one output.

    Details
    Doepfer A-150  Dual VC Switch
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  102. Doepfer A-149-2 Digital Random Voltages

    The A-149-2 is an expansion module to the A-149-1 and it generates random gate signals at eight outputs.

    Details
    Doepfer A-149-2  Digital Random Voltages
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  103. Doepfer A-149-1 Quant./Stored Random Voltages

    This module is based on the legendary Buchla 265 / 266 Source of Uncertainty and is a exceedingly complex random voltage generator. On the one hand it provides quantised random voltages with voltage controllable amplitude (or: amount of possible random voltages) and on the other hand random signals with 256 possible states whose probability and distribution can be set manually or per control voltage.

    Details
    Doepfer A-149-1  Quant./Stored Random Voltages
    availability ? immediately available
    € 19% VAT excl. €92.44 € 19% VAT incl. €110.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  104. Doepfer A-148 Dual S&H

    Two simple sample & hold units in one module for generating stepped random voltages or for slicing signals. For each unit you can individually change the mode from sample & hold to the similar track & hold.

    Details
    Doepfer A-148  Dual SundH
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  105. Doepfer A-146 Variable Waveform LFO

    The module A-146 is a LFO with three waveforms which are variable. For instance you can adjust the pulse width of the square waves or blend from the sawtooth wave to a triangle.

    Details
    Doepfer A-146  Variable Waveform LFO
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  106. Doepfer A-145 Standard LFO

    Modulation generator with five waveforms at separate outputs, three selectable frequency ranges and a reset input.

    Details
    Doepfer A-145  Standard LFO
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  107. Doepfer A-137-1 Wave Multiplier 1

    A well engineered, flexible wave multiplier module. Its primary use is a dynamic wave multiplication, distorting and folding waveforms, no matter if audio or control signals. All parameters except input volume can be modulated via control voltages.

    Details
    Doepfer A-137-1  Wave Multiplier 1
    availability ? immediately available
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

Items 151 to 257 of 257 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction