25 Item(s)

per page

Set Descending Direction
  1. Kenton Merge-4

    The Kenton Merge-4 is a mixer for MIDI signals. It features four input connectors. Results are emitted by two outputs simultaneously. The unit not only merges notes, velocity and controller values, but MIDI clock, time code and SysEx data as well.

    Details
    Kenton Merge-4
    availability ? immediately available
    € 19% VAT excl. €91.60 € 19% VAT incl. €109.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Kenton - rackmount kit for MIDI Stream

    The kit not only allows for mounting the Kenton MIDI Stream into a 19" rack, it also features two antenna connectors in the front for better reception.

    Details
    Kenton Rackohren f. MIDI Stream--9-
    availability ? immediately available
    € 19% VAT excl. €57.98 € 19% VAT incl. €69.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Kenton - DIN Sync Splitter

    Splitter cable for making two DIN-Sync signals out of one. For example to synchronise two TB-303s to one TR-808.

    Details
    Kenton DIN Sync Splitter (Doppelstecker)
    availability ? immediately available
    € 19% VAT excl. €8.40 € 19% VAT incl. €10.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Kenton - 8pin Jones to 3×3.5mm (f. EMS Synth, 2.5m)

    This special cable allows for connecting your Kenton MIDI/CV interface to your EMS synthesizer by only one cable!

    Details
    Kenton 8pin Jones - 3x3.5mm f. EMS synth 2.5m
    availability ? coming soon
    € 19% VAT excl. €57.98 € 19% VAT incl. €69.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Kenton - SYNC-5 (DIN Sync Splitter)

    Small unit for active splitting of an incoming DIN-Sync signal to five DIN-Sync outputs.

    Details
    Kenton - SYNC-5 (DIN Sync Splitter)
    availability ? immediately available
    € 19% VAT excl. €66.39 € 19% VAT incl. €79.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Kenton Thru-25

    For those who perform splitting MIDI signals as serious sport the THRU-25 is the right exercise equipment. It receives MIDI signal at it's input and produces 25 identical copies at the Thru sockets, with less than one milisecond latency. The unit is active and all thru signals are refreshed. Good and proven Kenton quality.

    Details
    Kenton Thru-25
    availability ? immediately available
    € 19% VAT excl. €175.63 € 19% VAT incl. €209.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Kenton DCB cable, 14 pin (bi-directional)

    Special cable for connecting two vintage Roland machines with a DCB port. This cable has 14-pin DCB plugs on each sinde and is bi-directional to assure communication in both directions.

    Details
    Kenton 8pin Jones - 3x3.5mm f. EMS synth 2.5m
    availability ? coming soon
    € 19% VAT excl. €66.39 € 19% VAT incl. €79.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Kenton Pro-DCB cable (8-pin Mini-DIN to 14-pin DCB)

    Spare cable for the Kenton Pro-DCB, for connecting the Pro-DCB with a Roland unit that has a DCB port.

    Details
    Kenton Pro-DCB cable (8-pin Mini-DIN to 14-pin DCB)
    availability ? immediately available
    € 19% VAT excl. €23.53 € 19% VAT incl. €28.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  9. Kenton Merge-8

    The Kenton Merge-8 is a mixer for MIDI signals. It features eight input connectors. Results are emitted by two outputs simultaneously. Alternatively, the Merge-8 can be configured to work as a dual mixer with four inputs and one output each. The unit not only merges notes, velocity and controller values, but MIDI clock, time code and SysEx data as well.

    Details
    Kenton Merge-4
    availability ? immediately available
    € 19% VAT excl. €142.86 € 19% VAT incl. €170.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. Kenton D-Sync

    D-Sync converts incoming MIDI clock data plus start / stop commands into the DIN-Sync format and vice versa. High class, opto-isolated connectors guarantee excellent performance. - The perfect partner for embedding Rolands TR-606, TR-808 and TR-909 as well as the TB-303 Bassline into a MIDI-Setup.

    Details
    Kenton Merge-4
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. Kenton - Modular Solo (black)

    Kenton’s Modular Solo is a high-end MIDI/CV converter with lots of nifty additional functions. The module looks like a Eurorack version of the Pro Solo. However, it offers some nice additional features like clock divisors and more flexible auxiliary outputs.

    Details
    Kenton Modular Solo  MIDI/CV interface
    availability ? immediately available
    € 19% VAT excl. €217.65 € 19% VAT incl. €259.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. Kenton - MIDI STREAM (Wireless MIDI)

    The Kenton Midi Stream allows for easy-to-use transmitting any MIDI data via radio

    The system consists of a compact transmitter of the size of a cigarette box and a receiver which can be rackmounted. Thus it´s perfectly suited to use a portable keyboard without cables live on stage.

    Details
    Kenton MIDI STREAM - Wireless MIDI
    availability ? shortly avaliable
    € 19% VAT excl. €360.50 € 19% VAT incl. €429.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Kenton - USB SOLO

    The USB-SOLO converts MIDI from your computer data into CV- gate, sync and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. 1V/oct and Hz/V characteristics are possible as well as normal gate and Switched Trigger (S-Trig).

    The unit features five CV- outputs and a DIN-Sync out. If you need to convert Midi not via USB, there is the PRO SOLO MK2 the right choice.

    Details
    Kenton USB SOLO Converter
    availability ? immediately available
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. Kenton Pro DCB Mk3 (with 20-pin DCB cable)

    The Kenton Pro DCB is a very comprehensive, fully programmable interface for MIDI-fying your Roland Jupiter 8s by the use of their DCB interface socket. It comes with a cable with a 20 pin connector which works with SOME Jupiter 8s.

    It works bi-directionally which means your instrument can not only receive but also transmit MIDI messages!

    Details
    Kenton Pro DCB converter (incl 20-PIN CABLE)
    availability ? coming soon
    € 19% VAT excl. €197.48 € 19% VAT incl. €235.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Kenton Thru-5

    The Kenton Thru-5 is a small box for splitting MIDI signals. The signal at MIDI input is being output at five parallel MIDI Thrus. It is an active device that isn't being powered by the MIDI line but by the included wall wart.

    Details
    Kenton Thru-5--9-
    availability ? immediately available
    € 19% VAT excl. €62.18 € 19% VAT incl. €74.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Kenton - LD2 Pro (Level Display)

    Mainly intended as a MIDI volume level indicator where high visibility is needed.
    the LD2 displays the level both numerically 0 - 127, and on a 20 segment bargraph. The LD2 isn't restricted to displaying volume only however, it can easily be re-configured to display the data value sent by any controller on any MIDI channel.

    Details
    Kenton LD2 Pro - Level Display
    availability ? coming soon
    € 19% VAT excl. €138.66 € 19% VAT incl. €165.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. Kenton - LNDR (Line Driver)

    LNDR is a master and slave pair that allows MIDI to be sent accurately in both directions at the same time, across distances of over 500 metres (1640 feet) using a standard network cable (CAT5 cable). This is over 33 times the distance achievable using standard MIDI cables.
    The Master unit is mains powered using the included PSU. CAT5 cable is not included (we don't know what length you need!)

    Details
    Kenton Midi Line Driver
    availability ? immediately available
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Kenton - Modular Solo (silver)

    Kenton’s Modular Solo is a high-end MIDI/CV converter with lots of nifty additional functions. The module looks like a Eurorack version of the Pro Solo. However, it offers some nice additional features like clock divisors and more flexible auxiliary outputs.

    Details
    Kenton Modular Solo  MIDI/CV interface
    availability ? immediately available
    € 19% VAT excl. €217.65 € 19% VAT incl. €259.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. Kenton - MIDI USB Host

    USB host-to-MIDI converter for "class compliant" USB MIDI devices.
    It provides MIDI In and Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. In this way USB-MIDI controllers can be connected not only to the computer but also to other gear with classic MIDI connectors.

    Details
    Kenton MIDI USB Host--9-
    availability ? immediately available
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. Kenton - Pro SOLO Mk2

    The PRO-SOLO Mk2 converts MIDI data into CV- gate and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. High-resolution 16-Bit converters provide accurate tracking and fast response. 1V/oct and Hz/V characteristics are possible as well as normal gate and Switched Trigger (S-Trig).

    The unit features two CV- and one gate output, additionally there´s a analog clock output. MIDI thru socket can also be used as DIN-Sync output or it can output two additional voltages with a special cable. MIDI synched LFO.

    Details
    Kenton Pro SOLO Mk2 Converter
    availability ? immediately available
    € 19% VAT excl. €163.87 € 19% VAT incl. €195.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. Kenton - cable for ProSOLO: DIN Sync - 2 x 3,5mm

    Cable for Kenton Pro Solo.  MIDI-jack  to  2x 3,5mm jacks.

    The cable allows to use two further CVs (Aus 2 3) instead of the MIDI-Thru socket.

    Details
    Kenton Kabel f. SOLO: DIN - 2 x 3,5 mono
    availability ? immediately available
    € 19% VAT excl. €10.92 € 19% VAT incl. €13.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Kenton - Pro 2000 MkII

    This Super-fast response time Midi to CV/Gate Converter has a MIDI syncable LFO(s) MIDI IN/THRU, MIDI analyser mode, Portamento, Selectable note priority, Set-ups stored in non-volatile RAM, Two completely independent CV channels, six additional CV outputs can be programmed to different MIDI channels. Switchable V/Oct and Hz/V scaling options, Optional KADI or DCB port on its own channel, 2 independent LFO's assignable to any output, In-built LFOs sync to MIDI clock, LCD display, Multiple configuration memories, internal power supply, built-in portamento adjustable in real-time, MIDI out with filtering to 'channelise' an omni on synth, designed to control all types of mono-synths, V-trig (up to 15v) or S-trig (with or without pull-up), Adjustable pitchbend range, any MIDI channel can be selected, MIDI monitor mode - for easy MIDI troubleshooting.

    Details
    Kenton Pro 2000 Converter
    availability ? immediately available
    € 19% VAT excl. €377.31 € 19% VAT incl. €449.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Kenton - Pro 2000 rack ears

    Rack ears for the Kenton Pro 2000 MIDI-CV converter.

    Details
    Kenton Pro 2000 Rackohren - Rack Ears
    availability ? shortly avaliable
    € 19% VAT excl. €41.18 € 19% VAT incl. €49.00
    Excl. 19% VAT, Excl. shipping

  24. Kenton - Pro DCB Mk3 (with 14-pin DCB cable)

    The Kenton Pro DCB is a very comprehensive, fully programmable interface for MIDI-fying your Roland Juno 60 (and some Jupiter 8s) by the use of their DCB interface socket. It comes with a cable with a 14 pin connector which works with all Juno-60s and SOME Jupiter 8s.

    It works bi-directionally which means your instrument can not only receive but also transmit MIDI messages!

    Details
    Kenton Pro DCB converter (incl 14-PIN CABLE)
    availability ? coming soon
    € 19% VAT excl. €180.67 € 19% VAT incl. €215.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Kenton Pro CV to MIDI

    The Pro CV to MIDI converts analog control voltages into MIDI data. Besides pitch CV and gate inputs, the unit features two flexibly employable aux connectors. In use, the Pro CV to MIDI shines with excellent performance and high stability.

    Details
    Kenton USB SOLO Converter
    availability ? immediately available
    € 19% VAT excl. €145.38 € 19% VAT incl. €173.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

25 Item(s)

per page

Set Descending Direction