39 Item(s)

per page

Set Descending Direction
  1. Make Noise Rene 2

    Rene 2 is a performance sequencer based on the Cartesian coordinate system. Thanks to its three-dimensional layout, complex, non-linear patterns including variations can be generated using a minimum of data. – The predecessor offered X and Y planes only. Another novelty: Rene 2 is a multi-track sequencer. Three channels, each with CV and gate outputs, are available. In addition, there are 64 memory slots for patterns.

    Details
    Make Noise Phonogene (v.372)--9-
    Status: The Article can be picked up at 4 p.m. if ordered before 12:00 noon / Article is ready for shipment
    availability ? immediately available
    € 19% VAT excl. €456.30 € 19% VAT incl. €543.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Make Noise Skiff (with power) incl. power cable

    In 2009 Make Noise designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for their René and Pressure Points touch controllers. Today, the new Skiff is an affordable and primarily ready-to-use solution. 104 HP width and an integrated power supply and distribution are perfect for a small modular system.

    Details
    Make Noise Skiff (powered)
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  3. Make Noise LxD

    The LxD in a narrow 4HP module in which two different Low Pass Gates carry out their daily task. They were designed to operate independently or combined to form the back end of a synth voice.

    Details
    lowpass gate,
    availability ? coming soon
    € 19% VAT excl. €91.60 € 19% VAT incl. €109.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  4. Make Noise - tELHARMONIC

    The tELHARMONIC is a Multi-Voice, Multi-Algorithm synthesizer module inspired by Thaddeus Cahill's Telharmonium instrument which was named for the music hall considered by some to be the location of the first electronic music concerts.
    The module was coded by Soundhack's Tom Erbe with the goal of presenting three historically important pioneering electronic tone generation techniques less often implemented within the modular synthesizer.

    Details
    Pittsburgh Modular - Synth Block--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €293.28 € 19% VAT incl. €349.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Make Noise - Shared System Black/Gold (Wooden case) incl. power cable

    Entire modular system with ten modules from Make Noise.
    Special Edition in black/gold plus an Erbe-Verb and a Morphagene.
    It integrates sound generators, lopass gates, effects, modulation generatros, a haptic controller and a sequencer. The unique CV-Bus is designed for convenient distribution of CV signals and adds a pre-amp plus stereo output section. The Shared System can be expanded by further modules as 28HP are non-occupied.

    Details
    Make Noise - Shared System with CV-Bus
    availability ? coming soon
    € 19% VAT excl. €4,284.87 € 19% VAT incl. €5,099.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Make Noise RxMx

    Totally unique is the RxMx (pronounced RixMix) because it combines the organic behaviour of lopass gates with the characteristics of a six-channel mixer and these of a crossfader. The mixer is more a scanner with voltage control addressed selection and modulation of a lopass-gate-channel and/or the number of neighbor channels. "Pinging" creates the simulation of a reverb because of the inert Vactrols' slow decay.

    Details
    ADDAC 703 Discrete Mixer--front
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €322.69 € 19% VAT incl. €384.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Make Noise - FXDf

    FXDf stands for Fixed Filter and that's exactly what this module is about. It features individual inputs for different filter slopes and six outputs with fixed frequency bands.

    Details
    Make Noise Multimode Gate--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €94.12 € 19% VAT incl. €112.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Make Noise blank panel 20HP

    Make Noise blank panel with 20HP width (10.16mm)

    Details
    Make Noise blank panel 10HP--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €11.34 € 19% VAT incl. €13.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Make Noise 15cm patchcables (5-Pack, pink)

    Set with five quality patchcords by Ad infinitum, 15cm long. Color: bright pink.

    Details
    /
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €8.32 € 19% VAT incl. €9.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. Make Noise - Tempi

    The Tempi is a surprisingly versatile tool. It offers six independent, simultaneously programmable channels, which generate complex rhythmical information based on divisions and multiplications of a simple clock signal. Thanks to two concepts of operation and a broad range of variation possibilities, the module is able to produce sophisticated grooves. Combined with a modern sequencer, let’s say a René, you get an extremely powerful setup for electronic compositions.

    Details
    Make Noise - Tempi
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €228.57 € 19% VAT incl. €272.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  11. Make Noise - 0-Coast

    West Coast? East Coast? Or no synthesis philosophy of a certain coast at all because it's too individual? The 0-Coast (No-Coast or Zero-Coast, as you like) is a different semi-modular desktop synthesizer. No filter and yet with great sound processing; no MIDI socket and yet with MIDI functionality, a tempo generator despite a sequencer? And all that under full voltage control.
    Small in size but with a big sound and plenty possibilities!

    Details
    Make Noise 0-COAST
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €415.97 € 19% VAT incl. €495.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  12. Make Noise System Cartesian (incl. power cable)

    System Cartesian is an extremely powerful and flexible, yet compact modular synthesizer. The circuits included are suitable for both classic and experimental sounddesign. Heart and soul of the setup is the cartesian sequencer René.

    Details
    Make Noise - Shared System with CV-Bus
    availability ? will be ordered on request
    € 19% VAT excl. €2,057.98 € 19% VAT incl. €2,449.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Make Noise - QMMG (black edition)

    Limited supply only! – Make Noise will produce a small amount of black and gold QMMGs soon. The module features four channels, which can be used as VCAs, Lo-Pass Gates or high-pass respectively low-pass filters. The QMMG has a classic sound. In LPG mode, it is reminiscent of the Buchla 292. Due to component tolerances, each channel sounds a little different. By combining several audio paths and operating modes, very complex results can be achieved.

    Details
    Make Noise Phonogene (v.372)--9-
    availability ? coming soon

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €545.38 € 19% VAT incl. €649.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  14. Make Noise - 7U Steel CV Bus Case (incl. power cable)

    A compact and sturdy featherweight – The Make Noise 7U case is made entirely out of steel. It comes equipped with two 3U rows of 104 HP each for installing modules. Additionally, there is a 1U row housing the CV Bus, a clever routing system for control voltages. A built-in preamp and an output section allow musicians to connect the 7U case to studio or live equipment without the need of an analog interface module. The implemented power supply is considered to be one of the best on the market.

    Details
    Make Noise - Shared System with CV-Bus
    availability ? coming soon
    € 19% VAT excl. €550.42 € 19% VAT incl. €655.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Make Noise - Shared System Black / Gold Plus (Steel case) incl. power cable

    The Shared System Plus is a full-blown modular synthesizer with eleven Make Noise modules. It comes equipped with audio generators, low-pass gates, effects, modulators, a haptic controller and a sequencer. In contrast to the normal Shared System, a Tempi clock tool is built-in as well. The unique CV Bus was designed to conveniently distribute control voltages. In addition, the 1U panel features a preamplifier and an output section. The Shared System Plus can be expanded with additional modules, as twelve HPs are covered by blind panels.

    Details
    Make Noise - Shared System with CV-Bus
    Status: The Article can be picked up at 4 p.m. if ordered before 12:00 noon / Article is ready for shipment
    availability ? immediately available
    € 19% VAT excl. €4,284.87 € 19% VAT incl. €5,099.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Make Noise - DynaMix

    DynaMix is a two-channel low-pass gate with clever level functions and an integrated mixer. Instead of vactrols, transistor circuits are used to control the integrated filters and VCAs. Thanks to this, the DynaMix responds much faster than the average low-pass gate. Its sound is comparatively hard, but nonetheless very musical. Level potentiometers at the inputs allow musicians to add soft distortion to incoming signals. Dynamic sections help creating side chain effects. A mixer combines not only the signals emitted by both low-pass gates, but ties-in other audio material as well.

    Details
    Make Noise Phonogene (v.372)--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €133.61 € 19% VAT incl. €159.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. Make Noise - Contour

    Contour is a classic ADSR envelope with some nifty additional features. Attack and sustain parameters feature dedicated potentiometers. Decay and release are controlled mutually via one knob. CV inputs allow users to modulate all time parameters. Contour’s curve shapes can be linear or exponential. – Or anything in between. EON and EOC connectors emit a trigger signal after the attack respectively the release phase is completed. For tapping envelope signals, there are a normal and an inverted output. Contour stands out due to fast response and intuitive operation. The module is a great choice for creating percussive sounds. By connecting the EON output to the gate input, Contour can be transformed into a LFO.

    Details
    Make Noise Phonogene (v.372)--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Make Noise - MIDI adapter for the 0-Coast

    You lost your MIDI adapter for the 0-Coast synthesizer? – No worries! Here you can get a replacement cable with DIN connector and 3.5 mm TRS jack.

    Details
    Make Noise 0-COAST
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €4.20 € 19% VAT incl. €5.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  19. Make Noise - Morphagene

    Experimental sampler – Morphagene combines virtual tapes and classical cutting techniques with state-of-the-art granular algorithms to process sound. Audio material can be recorded, sliced and rearranged in the twinkling of an eye. Playback speed and direction are adjustable as well. Furthermore, it is possible to stretch or squash sounds. CV inputs allow the user to modulate every single parameter. An envelope follower with CV output and the EOSG trigger channel enable Morphagene to influence other modular circuits. The module can handle mono as well as stereo signals. – A versatile remix tool, which is not only interesting for music producers but audio artists and DJs as well.

    Details
    Make Noise Phonogene (v.372)--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €456.30 € 19% VAT incl. €543.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. System Concréte (incl. power cable)

    System Concrète is tailor-made for experimental sound manipulations. Centerpiece is the Phonogene, a digital recorder based on the designs of old tape machines. The other modules included in the setup comprise a filter, an effect and modulation circuits. A great combination to carry on the ideas of Musique Concrète.

    Details
    Make Noise System Concréte
    availability ? will be ordered on request
    € 19% VAT excl. €1,627.73 € 19% VAT incl. €1,937.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  21. Make Noise Erbe-Verb

    Unique, entirely voltage controllable digital reverb with seven reverb parameters, a reverse function, tempo synchronisation, mono/stereo outputs and even a CV output. Besides the usual reverbs you can create chorus-like, hovering sounds and almost infinite reverbs with the Erbe-Verb. It's been programmend by Tom Erbe of Soundhack, who was responsible for the Echophon.

    Details
    Make Noise Erbe-Verb
    availability ? shortly avaliable
    € 19% VAT excl. €391.60 € 19% VAT incl. €466.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Make Noise - Optomix (Rev.2)

    The Optomix is a direct coupled, two channel low pass gate utilizing 4 vactrols to provide simultaneous voltage control over amplitude and frequency content of a signal. It is in essence, a VCFA.

    Additionally Optomix offers a summing stage complete with an AUXiliary IN allowing for the chaining of multiple units to create larger mixes.

    Details
    Make Noise Optomix--9-
    availability ? coming soon
    € 19% VAT excl. €166.39 € 19% VAT incl. €198.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Make Noise modDemix

    The modDemix consists of 2 identical direct coupled balanced modulator circuits that may be used together or individually to process audio or control signals. Usually you will use the module for amplitude modulation, single-side modulation, ring modulation, VCA, attenuation, polarization and multiplication.

    The new version (released late July 2014) has been changed regarding normalizations, is easier to use as a mixer and is more intutive due to clearer faceplate graphocs

    Details
    Make Noise modDemix - VCA / Ringmod / Mixer--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. Make Noise - Maths 2

    MATHS is a Swiss Army knife, a very versatile module containing analog computers' funcions : integrating, inverting, addition and scaling of signals.
    But what does it all mean in the end? Well, you can use the module as a slew limiter envelope generator, oscillator or LFO. Equally you can process CV and audio signals, for example attenuate, invert and mix them.

    Details
    Make Noise Maths 2--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €251.26 € 19% VAT incl. €299.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Make Noise - Echophon

    Awarded with the Electronic Musician 2013 Editor´s Choice Award!

    The Echophon flips the script on the trend of software based emulation of analog gear! Tony Rolando from MakeNoise and Tom Erbe from Soundhack prsent the Echophon, a DSP based Echo and Delay module for the Eurorack modular system. It is a digital echo with an unique pitch shifting alogorithm, smooth time modulation, tempo synchronisation and feedbacks with saturation. All parameters can be voltage controlled.

    Details
    Make Noise Echophon--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €317.65 € 19% VAT incl. €378.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  26. Make Noise - DPO

    Make Noise´s long-awaited DPO (Dual Prismatic Oscillator) is a dual analog VCO with plenty of internal modualtion possibilities, FM, a wave multiplier and other timbral controls. The main idea of primary and modulation oscillators with internal FM is based on Buchla´s 259 oscillator.

    Details
    Make Noise DPO--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €503.36 € 19% VAT incl. €599.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  27. Make Noise - Brains

    BRAINS is a clocked sequential binary event machine, intended to be connected to tactile controllers.
    Or let´s just say it´s an sequencer expander for one or two Pressure Points by Make Noise which allows you to create a haptical three channel analogue sequencer with either four or eight steps, depending on the number of Pressure Points you use.

    Details
    Make Noise Brains (PP sequencer expander)--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €89.08 € 19% VAT incl. €106.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  28. Make Noise blank panel 6HP

    MakeNoise blank panel in 6 HP width (30.5 mm).

    Details
    Make Noise blank panel 6HP--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €4.20 € 19% VAT incl. €5.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  29. Make Noise blank panel 4HP

    MakeNoise blank panel in 4 HP (ca. 20mm)

    Details
    Make Noise blank panel 4HP--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €4.12 € 19% VAT incl. €4.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  30. Make Noise Pressure Points

    Pressure Points is a controller in which one of four sets of each three tuned voltages are selected by touching the corresponding printed copper wire at the bottom of the instrument. Touching Pressure Points, you become part of the circuit. In addition to the tuned voltages, a gate signal (Gate OUT) and a control voltage proportional to the amount of pressure applied (Press OUT), are generated when the module is touched. Up to 4 of these modules may be chained together to create controllers of varying size and complexity. Each of the Gate and Press OUTS are normalized to their respective SUM BUS which is output at the last Gate and Press OUT in the Chain.

    Details
    Make Noise Pressure Points--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €165.55 € 19% VAT incl. €197.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  31. Make Noise Pressure Points CHAIN CABLE

    The Chain Cable allows for chaining a number of Pressure Points modules in order to create a controller with more than four touch plates.

    Details
    Make Noise Pressure Points CHAIN CABLE--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €5.04 € 19% VAT incl. €6.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  32. Make Noise Rosie

    Rosie is an output audio interface with two input channels and additional functions like crossfadting, a mono aux send with stereo return (!). It was developed for live use when pre-listening patched with headphones is essential and for that reason Rosie has an interesting auto-cue function and a controlable head phone amp.

    Details
    Make Noise Rosie
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €122.69 € 19% VAT incl. €146.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  33. Make Noise Teleplexer

    The Teleplexer is an unusual module inspired by the direct and fast entry methods of telegraphy for haptically controlled signal routing. You play it drectly with the tips of patchcords carrying voltages or audio. Depending which contact plate is touched by the cable the signals are routed, mixed, inverted in phase and so on.

    Details
    Make Noise Pressure Points--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €85.71 € 19% VAT incl. €102.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  34. Make Noise STO

    STO = Sub-Timbral Oscillator. Compact analog VCO with a wave shaper and a sub-oscillator. It has been designed tfor generating sine waves, variable shape waves, sub octaves and linear FM on the analog domain and it has to be considered the small melodic brother of the harmonic DPO.

    Details
    /
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  35. Make Noise Multiple

    Passive signal splitter, a so-called multiple. This one matches MakeNoise´s flat black and gold design. It has neun interconnected sockets that can be used in a number of ways due to normalizations: as a 3x3, 1x5 or 1x5-Multiple.

    Details
    Make Noise Mult
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €25.21 € 19% VAT incl. €30.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  36. Make Noise blank panel 10HP

    MakeNoise blank panel in 10 HP (5.08cm)

    Details
    Make Noise blank panel 10HP--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €7.56 € 19% VAT incl. €9.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  37. Make Noise Function

    Similar to the related MATHS module, FUNCTION is also a versatile function generator, so to say an electronic swiss army knife for your eurorack module system. You can use it as an envelope, LFO, portamento generator, sample&hold or as a simple filter, but many other utility functions can be generated once you have understood the module.

    Details
    Make Noise Function--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €130.25 € 19% VAT incl. €155.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  38. Make Noise Wogglebug Mk2

    The Wogglebug: your personal monster for the modular system which can produce clocked stepped and smoothed random voltages, the ominous Woggle CV and featuring two oscillators that are controlled by random and finally the ringmodulated output of both VCOs. The module can be clocked externally but it has an clock generator and additionally a random gate burst generator, creating fast, short random pulses.

    The new version in black is smaller, has a stable clock, CV of influence parameter and some other minor changes, see below.

    Details
    Make Noise Wogglebug--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €211.76 € 19% VAT incl. €252.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  39. Make Noise blank panel 1HP

    MakeNoise blank panel in 1 HP width (ca. 5mm).

    Details
    Make Noise blank panel 1HP--9-
    Status: The article can be picked up in the shop right now / article is ready for dispatch
    availability ? immediately available
    € 19% VAT excl. €3.15 € 19% VAT incl. €3.75
    Excl. 19% VAT, Excl. shippingLieferzeit 1

39 Item(s)

per page

Set Descending Direction