43 Item(s)

per page

Set Descending Direction
  1. Future Retro - Swynx

    Small in size but with great features is this sync box that converts MIDI signals into MIDI clock, DinSync24, CR-78 clock and analog clock. Beyond this it can add shuffle to all those clock and sync signals and offers 12 time signatures. Last but not least: you can use the unit as a pattern programmer for the CR-78!

    Details
    /
    availability ? immediately available
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Haken Audio - Continuum EaganMatrix Expander (CEE)

    The hardware unit Continuum EaganMatrix Expander (alias CEE) expands the polyphony of the internal sound engine of the Haken Continuum, the EaganMatrix. The expander triples the computation power of the Continuum, thereby tripling the polyphony. This is useful when more than 16 fingers are touching the surface or you play a lot of percusive sounds with long release times.

    Details
    /
    availability ? shortly avaliable
    € 19% VAT excl. €1,092.44 € 19% VAT incl. €1,300.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Haken Audio - CEE rack ears

    Metal rack ears for the Continuum EaganMatrix Expander (CEE) making it possible to mount it in a 19" rack.

    Details
    /
    availability ? shortly avaliable
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Kenton - SYNC-5 (DIN Sync Splitter)

    Small unit for active splitting of an incoming DIN-Sync signal to five DIN-Sync outputs.

    Details
    Kenton - SYNC-5 (DIN Sync Splitter)
    availability ? immediately available
    € 19% VAT excl. €66.39 € 19% VAT incl. €79.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. E-RM Midiclock+

    The MIDICLOCK+ of Berlin based "Erfindungsbüro Rest und Maier" alias E-RM is a simple yet great tool. It is a small box with only one task: generating a unbelievably clean and jitter-free MIDI clock signal for synchronising sequencers DAWs etc. Operation is super easy due to two buttons and an encoder.

    Details
    ERM Midiclock+
    availability ? immediately available
    € 19% VAT excl. €163.87 € 19% VAT incl. €195.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. SND ACME4

    SNDs newest device called ACME4 is a professional centralcontrol system for musical synchronisation signals. The abbreviation ACME stands for "Advanced Clock Management Engine".
    Is is the only device in the world to generate a MIDI master clock that is absolutely jitter-free !!

    Details
    SND ACME4--9-
    availability ? immediately available
    € 19% VAT excl. €839.50 € 19% VAT incl. €999.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Kenton - DIN Sync Splitter

    Splitter cable for making two DIN-Sync signals out of one. For example to synchronise two TB-303s to one TR-808.

    Details
    Kenton DIN Sync Splitter (Doppelstecker)
    availability ? shortly avaliable
    € 19% VAT excl. €8.40 € 19% VAT incl. €10.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Kenton - rackmount kit for MIDI Stream

    The kit not only allows for mounting the Kenton MIDI Stream into a 19" rack, it also features two antenna connectors in the front for better reception.

    Details
    Kenton Rackohren f. MIDI Stream--9-
    availability ? immediately available
    € 19% VAT excl. €57.98 € 19% VAT incl. €69.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Kenton - USB SOLO

    The USB-SOLO converts MIDI from your computer data into CV- gate, sync and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. 1V/oct and Hz/V characteristics are possible as well as normal gate and Switched Trigger (S-Trig).

    The unit features five CV- outputs and a DIN-Sync out. If you need to convert Midi not via USB, there is the PRO SOLO MK2 the right choice.

    Details
    Kenton USB SOLO Converter
    availability ? immediately available
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. Kenton Pro DCB Mk3 (with 20-pin DCB cable)

    The Kenton Pro DCB is a very comprehensive, fully programmable interface for MIDI-fying your Roland Jupiter 8s by the use of their DCB interface socket. It comes with a cable with a 20 pin connector which works with SOME Jupiter 8s.

    It works bi-directionally which means your instrument can not only receive but also transmit MIDI messages!

    Details
    Kenton Pro DCB converter (incl 20-PIN CABLE)
    availability ? coming soon
    € 19% VAT excl. €197.48 € 19% VAT incl. €235.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. Future Retro - 1x4x2

    Intended as an expansion for Future Retro's Swynx to multiply it's outputs you can use this little box with as an independent unit as well. The special feature is that it can be used simultaneously as a Thru box for MIDI and DIN Sync signals.

    Details
    MIDI Solutions M8--9-
    availability ? immediately available
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. Kenton Pro CV to MIDI

    The Pro CV to MIDI converts analog control voltages into MIDI data. Besides pitch CV and gate inputs, the unit features two flexibly employable aux connectors. In use, the Pro CV to MIDI shines with excellent performance and high stability.

    Details
    Kenton USB SOLO Converter
    availability ? immediately available
    € 19% VAT excl. €145.38 € 19% VAT incl. €173.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Snyderphonics - Manta

    Luxury controller for computers and modular systems – The Manta comes equipped with 48 touch sensors, arranged in a hexagonal array. The control elements not just react to body contact, but also evaluate how much surface area a finger is covering. Bicolor background lighting visualizes the status of each sensor. Besides notes and velocity values, the controls also generate MIDI CC data. Additionally to its hexagonal array, the Manta offers two touch sliders and four "buttons". The controller is connected to a computer via USB. For using the Manta with analog equipment, a Manta Mate is required, which is not included.

    Details
    Rossum Electro-Music - Evolution
    availability ? immediately available
    € 19% VAT excl. €713.45 € 19% VAT incl. €849.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  14. Kenton D-Sync

    D-Sync converts incoming MIDI clock data plus start / stop commands into the DIN-Sync format and vice versa. High class, opto-isolated connectors guarantee excellent performance. - The perfect partner for embedding Rolands TR-606, TR-808 and TR-909 as well as the TB-303 Bassline into a MIDI-Setup.

    Details
    Kenton Merge-4
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Kenton Merge-8

    The Kenton Merge-8 is a mixer for MIDI signals. It features eight input connectors. Results are emitted by two outputs simultaneously. Alternatively, the Merge-8 can be configured to work as a dual mixer with four inputs and one output each. The unit not only merges notes, velocity and controller values, but MIDI clock, time code and SysEx data as well.

    Details
    Kenton Merge-4
    availability ? immediately available
    € 19% VAT excl. €142.86 € 19% VAT incl. €170.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Kenton Pro-DCB cable (8-pin Mini-DIN to 14-pin DCB)

    Spare cable for the Kenton Pro-DCB, for connecting the Pro-DCB with a Roland unit that has a DCB port.

    Details
    Kenton Pro-DCB cable (8-pin Mini-DIN to 14-pin DCB)
    availability ? immediately available
    € 19% VAT excl. €23.53 € 19% VAT incl. €28.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  17. Expert Sleepers USAMO

    USAMO is not an Arab name but an Universal Sample-Accurate MIDI Output. It generates ultra-precise and jitter-free MIDI from an audio track in your DAW, not only MIDI clock but lots of other MIDI data and even SysEx.
    The MIDI signal is generatedby an virtual instrument running on your computer and it's being translated by the USAMO then.

    Details
    USAMO front
    availability ? shortly avaliable
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. E-RM Multiclock USB

    The Multiclock USB is a multi-format solution for audio synchronisation. It takes your DAW's audio clock an derives an ultra precise and almost jitter-free clock from it. The clock is emitted at the four outputs, each of which can be separately shifted and can have it's own shuffle setting. Each channel can generate MIDI Clock, DIN-Sync, an analog clock and an analog LFO is possible as well.

    This version is equipped with an additional USB MIDI connector board.

    Details
    ERM Midiclock+
    availability ? immediately available
    € 19% VAT excl. €436.13 € 19% VAT incl. €519.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. Kenton Thru-25

    For those who perform splitting MIDI signals as serious sport the THRU-25 is the right exercise equipment. It receives MIDI signal at it's input and produces 25 identical copies at the Thru sockets, with less than one milisecond latency. The unit is active and all thru signals are refreshed. Good and proven Kenton quality.

    Details
    Kenton Thru-25
    availability ? immediately available
    € 19% VAT excl. €175.63 € 19% VAT incl. €209.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. Erica Synths - Midi Through Box

    Even in times of USB, optical connections and other modern ways to transmit data the good old MIDI is still implemented and sometimes needs little helpers like this active, ultra-fast eight-fold splitter, a so-called MIDI Thru Box.

    Details
    Erica Synths - Midi Through Box
    availability ? immediately available
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. E-RM Modular Whip

    With this short cable whip it is possible to get the analog clock signal generated by the ERM Midiclock+'s DIN socket directly at 3.5mm minisockets. This makes integration with your Eurorack system very easy.

    Details
    ERM Midiclock+
    availability ? immediately available
    € 19% VAT excl. €15.97 € 19% VAT incl. €19.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Kenton - Pro DCB Mk3 (with 14-pin DCB cable)

    The Kenton Pro DCB is a very comprehensive, fully programmable interface for MIDI-fying your Roland Juno 60 (and some Jupiter 8s) by the use of their DCB interface socket. It comes with a cable with a 14 pin connector which works with all Juno-60s and SOME Jupiter 8s.

    It works bi-directionally which means your instrument can not only receive but also transmit MIDI messages!

    Details
    Kenton Pro DCB converter (incl 14-PIN CABLE)
    availability ? immediately available
    € 19% VAT excl. €180.67 € 19% VAT incl. €215.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Kenton - Pro 2000 rack ears

    Rack ears for the Kenton Pro 2000 MIDI-CV converter.

    Details
    Kenton Pro 2000 Rackohren - Rack Ears
    availability ? shortly avaliable
    € 19% VAT excl. €41.18 € 19% VAT incl. €49.00
    Excl. 19% VAT, Excl. shipping

  24. Haken Audio - Continuum Voltage Converter (CVC)

    The CVC is a high resolution MIDI/control voltage converter to fully exploit the fast data rates and ranges of the Continuum. The Continuum Voltage Converter (CVC) generates control voltage signals that are perfectly suited for interfacing with analog synthesizer systems. The CVC allows for the polyphonic X,Y, and Z outputs of the Continuum to be converted into a total of sixteen continuous control voltages and gates. To achieve this the data output of the Continuum is connected directly to the CVC's data input, avoiding Midi altogether. The CVC is specifically made for the Continuum and will not work with any other device.

    Details
    Haken Audio control voltage converter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €974.79 € 19% VAT incl. €1,160.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Doepfer converter MCV4 Midi to CV

    The MCV4 is the most affordable four mode Midi-to-CV/Gate Interface by Doepfer. The unit is provided with 4 analog control voltage outputs (CV1...4) and one Gate/Trigger output. Perfect for controlling your CV based machines and a quick solution to integrate older Synthesizers or Filters to your Midi Setup.

    Details
    Doepfer MCV4 Midi-CV converter
    availability ? immediately available
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  26. Doepfer MSY2 MIDI to DIN-Sync converter

    The MSY2 is an interface which converts MIDI Clock and Start/Stop messages to Roland´s DIN Sync.  Perfect and easy-to-use interface for synchronizing your TR-808, TR-606 TB-303 and other gear to MIDI. Also included is an analog clock output for sequencers or arpeggiators in many different old synths and also modular synthesizers.

    Details
    Doepfer MSY2 Midi-DINSync converter
    availability ? immediately available
    € 19% VAT excl. €71.43 € 19% VAT incl. €85.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  27. Doepfer XLR power supply for LMK master keyboards

    Fits  all newer Doepfer LMK series master keyboards  equipped with an XLR jack.

    Very old LMKs had a different power connector so make sure which one you need.

    Details
    Doepfer Netzteil mit XLR für  Masterkeyboards
    availability ? shortly avaliable
    € 19% VAT excl. €21.01 € 19% VAT incl. €25.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  28. Doepfer PK88 Midikeyboard USB

    PK88 was designed especially for the requirements of the "mobile pianist" who needs a high class and easy to carry keyboard but is able to dispense with extended MIDI features. First of all the PK88 was made to combine it with an expander or software synthesizer - especially for piano sound generators.

    Details
    Doepfer PK88 MIDI-Keyboard 88 keys, USB
    availability ? shortly avaliable
    € 19% VAT excl. €731.09 € 19% VAT incl. €870.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  29. Doepfer keyboards LMK4 Masterkeyboard

    The LMK4 is the high end masterkeyboard from Doepfer. 8 split zones, 128 memories and many free programmable controllers ( 2 wheels, 2 sliders, one rotary potentiometer, 2 footcontrol connectors, 2 footswitch connectors, after touch). And of course the Doepfer acoustic touch.

    Details
    Doepfer LMK4  Masterkeyboard 88 Tasten
    availability ? shortly avaliable
    € 19% VAT excl. €1,260.50 € 19% VAT incl. €1,500.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  30. Doepfer LMK2 Masterkeyboard 88 keys USB

    LMK2 is a low cost MIDI masterkeyboard with 4 keyboard zones, 2 wheels and after touch. It is suitable for all applications where the extraordinary masterkeyboard functions of the LMK4   are not required but a high quality keyboard are indispensible.

    Real piano style action with hammer mechanics; black flightcase with handle and removable lid; Velocity resolution max. 127 steps resolution, dependig upon selected velocity curve;  8 velocity response curves; Monophonic aftertouch (Channel-aftertouch)

    Details
    Doepfer LMK2  Masterkeyboard 88 keys, USB
    availability ? shortly avaliable
    € 19% VAT excl. €966.39 € 19% VAT incl. €1,150.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  31. Doepfer Dark Link USB/MIDI-Cv interface

    Dark Link is a Midi/USB-to-CV/Gate interface to control vintage monophonic synthesizers via Midi or USB. Dark Link is nothing but the USB/Midi interface of the Dark Energy. It has available 4 analog control voltage outputs (CV1 to 4) and one Gate output.

    Details
    Doepfer Dark Link USB interface--9-
    availability ? immediately available
    € 19% VAT excl. €109.24 € 19% VAT incl. €130.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  32. Haken Audio Continuum (full size)

    The Continuum Fingerboard is a MIDI performance instrument with an innovative, three-dimensional control surface. Thanks to its polyphonic, modular DSP engine, the Fingerboard can not only be used for playing external hardware and software synthesizers, but as a stand-alone device as well. Sounds produced by the internal sound generator are very atmospheric. The multi-gesture control surface enables musicians to create extremely expressive performances. In detail, movements on the X, Y and Z axes are evaluated. – Of up to 16 fingers! The X-axis is used to generate pitch data. With slight movements to the left and right, users can create vibrato effects. Vigorous wiping gestures over a large area of the playing surface result in seamless, high-resolution glissandi. The Y-axis can be used to generate additional MIDI data. – More or less a modulation wheel per finger. The Z-axis is somewhat of a velocity and polyphonic aftertouch control. Via expanders, users can add more DSP power and CV connectors to their instrument. (Sold separately) The Continuum Fingerboard offered here is the full-size version with a pitch range of nearly eight octaves.

    Details
    Haken Audio Continuum (full size)--9-
    availability ? shortly avaliable
    € 19% VAT excl. €5,798.32 € 19% VAT incl. €6,900.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  33. Haken Audio Continuum (full size) Case

    Case for the Fullsize Continuum. Easy transport thanks to rugged handles and inline skate wheels

    Details
    Haken Audio Continuum (full size) Case--9-
    availability ? shortly avaliable
    € 19% VAT excl. €486.55 € 19% VAT incl. €579.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  34. Kenton - Pro 2000 MkII

    This Super-fast response time Midi to CV/Gate Converter has a MIDI syncable LFO(s) MIDI IN/THRU, MIDI analyser mode, Portamento, Selectable note priority, Set-ups stored in non-volatile RAM, Two completely independent CV channels, six additional CV outputs can be programmed to different MIDI channels. Switchable V/Oct and Hz/V scaling options, Optional KADI or DCB port on its own channel, 2 independent LFO's assignable to any output, In-built LFOs sync to MIDI clock, LCD display, Multiple configuration memories, internal power supply, built-in portamento adjustable in real-time, MIDI out with filtering to 'channelise' an omni on synth, designed to control all types of mono-synths, V-trig (up to 15v) or S-trig (with or without pull-up), Adjustable pitchbend range, any MIDI channel can be selected, MIDI monitor mode - for easy MIDI troubleshooting.

    Details
    Kenton Pro 2000 Converter
    availability ? immediately available
    € 19% VAT excl. €377.31 € 19% VAT incl. €449.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  35. Kenton - cable for ProSOLO: DIN Sync - 2 x 3,5mm

    Cable for Kenton Pro Solo.  MIDI-jack  to  2x 3,5mm jacks.

    The cable allows to use two further CVs (Aus 2 3) instead of the MIDI-Thru socket.

    Details
    Kenton Kabel f. SOLO: DIN - 2 x 3,5 mono
    availability ? immediately available
    € 19% VAT excl. €10.92 € 19% VAT incl. €13.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  36. Kenton - Pro SOLO Mk2

    The PRO-SOLO Mk2 converts MIDI data into CV- gate and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. High-resolution 16-Bit converters provide accurate tracking and fast response. 1V/oct and Hz/V characteristics are possible as well as normal gate and Switched Trigger (S-Trig).

    The unit features two CV- and one gate output, additionally there´s a analog clock output. MIDI thru socket can also be used as DIN-Sync output or it can output two additional voltages with a special cable. MIDI synched LFO.

    Details
    Kenton Pro SOLO Mk2 Converter
    availability ? immediately available
    € 19% VAT excl. €163.87 € 19% VAT incl. €195.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  37. Kenton - MIDI USB Host

    USB host-to-MIDI converter for "class compliant" USB MIDI devices.
    It provides MIDI In and Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. In this way USB-MIDI controllers can be connected not only to the computer but also to other gear with classic MIDI connectors.

    Details
    Kenton MIDI USB Host--9-
    availability ? immediately available
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  38. Kenton - LNDR (Line Driver)

    LNDR is a master and slave pair that allows MIDI to be sent accurately in both directions at the same time, across distances of over 500 metres (1640 feet) using a standard network cable (CAT5 cable). This is over 33 times the distance achievable using standard MIDI cables.
    The Master unit is mains powered using the included PSU. CAT5 cable is not included (we don't know what length you need!)

    Details
    Kenton Midi Line Driver
    availability ? immediately available
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  39. Kenton Thru-5

    The Kenton Thru-5 is a small box for splitting MIDI signals. The signal at MIDI input is being output at five parallel MIDI Thrus. It is an active device that isn't being powered by the MIDI line but by the included wall wart.

    Details
    Kenton Thru-5--9-
    availability ? immediately available
    € 19% VAT excl. €62.18 € 19% VAT incl. €74.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  40. Kenton Merge-4

    The Kenton Merge-4 is a mixer for MIDI signals. It features four input connectors. Results are emitted by two outputs simultaneously. The unit not only merges notes, velocity and controller values, but MIDI clock, time code and SysEx data as well.

    Details
    Kenton Merge-4
    availability ? immediately available
    € 19% VAT excl. €91.60 € 19% VAT incl. €109.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  41. Haken Audio Continuum (half size) Case

    Heavy case for heavy transport!

    Details
    Haken Audio Continuum (half size) Case--9-
    availability ? shortly avaliable
    € 19% VAT excl. €368.91 € 19% VAT incl. €439.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  42. Haken Audio Continuum (half size)

    The Continuum Fingerboard is a MIDI performance instrument with an innovative, three-dimensional control surface. Thanks to its polyphonic, modular DSP engine, the Fingerboard can not only be used for playing external hardware and software synthesizers, but as a stand-alone device as well. Sounds produced by the internal sound generator are very atmospheric. The multi-gesture control surface enables musicians to create extremely expressive performances. In detail, movements on the X, Y and Z axes are evaluated. – Of up to 16 fingers! The X-axis is used to generate pitch data. With slight movements to the left and right, users can create vibrato effects. Vigorous wiping gestures over a large area of the playing surface result in seamless, high-resolution glissandi. The Y-axis can be used to generate additional MIDI data. – More or less a modulation wheel per finger. The Z-axis is somewhat of a velocity and polyphonic aftertouch control. Via expanders, users can add more DSP power and CV connectors to their instrument. (Sold separately) The Continuum Fingerboard offered here is the half-size version with a pitch range of nearly four octaves.

    Details
    Haken Audio Continuum (half size)--9-
    availability ? shortly avaliable
    € 19% VAT excl. €3,697.48 € 19% VAT incl. €4,400.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  43. Doepfer keyboards D3M Waterfalltastatur

    The d3 is Doepfer´s modular organ keyboard series which has been developed as a master keyboard for organ simulations primarely. The first product released was the d3m, a pure organ keyboard without drawbars. It is possible to cascade several d3m units to create a multi-keyboard organ controller but it is also a smart very stable keyboard for anything else.. without wheels, unfortunately.

    Details
    Doepfer D3M Hammerfall Organ keyboard
    availability ? shortly avaliable
    € 19% VAT excl. €377.31 € 19% VAT incl. €449.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

43 Item(s)

per page

Set Descending Direction