17 Item(s)

per page

Set Descending Direction
Nur verfügbare anzeigen
  1. Audiowerkstatt - DIN-Restarter V2

    With the Audiowerkstatt DIN-Restarter it is possible to start and stop a DIN-Sync-Slave without restarting the Master-Clock. - Fully synchronized, of course. Very handy if you want to jam with several drum computers, bassline synthesizers and the modular system. Compatible with DIN-Sync24 and DIN-Sync48! The DIN-Restarter V2 has all functions of the original Audiowerkstatt DIN-Restarter, but now comes in a powder-coated steel-enclouser and stores its settings.

    Details
    audiowerkstatt_midi_clock_divider_v2
    Status: ...
    availability ? ...
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  2. Audiowerkstatt - Din2midi2din V2

    The Audiowerkstatt Din2midi2din V2 enables synchronization between MIDI and DIN sync devices. The small box converts the synchronization format known as "DIN-Sync" or "Sync24" or "Sync48" into MIDI clock signals and vice versa. The Din2midi2din V2 has all functions of the original audio workshop Din2midi2din device, but is now delivered in a powder-coated steel case and stores its settings.

    Details
    audiowerkstatt_midi_clock_divider_v2
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  3. Audiowerkstatt - MIDI-Clock-Divider V2

    The Audiowerkstatt MIDI-Clock-Divider V2 is a clock divider for the MIDI clock. Experimental musicians will be happy about this tool, because different sequences and loops get different playback speeds, and still meet again depending on the divider. The small box divides incoming clock signals by 1 to 9. MMC commands (Start, Stop, Continue) are also transmitted. The device saves the settings and is immediately ready for use at the next power up, with the same configuration.

    Details
    audiowerkstatt_midi_clock_divider_v2
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  4. Audiowerkstatt - MIDI-Clock-Multiplier V2

    You would like to add a 32nd slave to a master device working with 16ths? Or is your goal to create polyrhythmic sequences, composed of two seemingly free running machines? – In both cases, the MIDI-Clock-Multiplier is exactly what you need! The small box multiplies incoming clock signals by 1 to 9. MMC commands (start, stop, continue) are handed off to the slave as well.

    Details
    Kenton USB SOLO Converter
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Audiowerkstatt - MIDI-Clock-Shifter V2

    The Audiowerkstatt MIDI-Clock-Shifter V2 is designed to let you move your MIDI-slave as many MIDI-clock-ticks as you want forward or backward, while running in synchronization to the MIDI-master. The MIDI-Clock-ShifterV2 has all functions of the original Audiowerkstatt MIDI-Clock-Shifter, but now comes in a powder-coated steel-enclouser and stores its settings.

    Details
    Kenton USB SOLO Converter
    Status: ...
    availability ? ...
    € 19% VAT excl. €150.42 € 19% VAT incl. €179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Audiowerkstatt - MIDI-Restarter V2

    Using the Restarter, you can start and stop a MIDI slave in sync without the need to touch the master clock. – A very handy tool for jamming with several drum computers, bassline synthesizers and your modular system.

    Details
    Kenton USB SOLO Converter
    Status: ...
    availability ? ...
    € 19% VAT excl. €137.82 € 19% VAT incl. €164.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Circuit Happy - Missing Link

    The Missing Link is a clock generator with Ableton Link integration. The perfect tool to wirelessly synchronize analog setups with computer, tablet and / or smartphone. Easy to install and use! Even DIN syncable via an adapter! Thanks to Tap Tempo, the beat can also be quickly adjusted to a live situation. Plug in a USB battery pack and make music in the park! The Missing Link is the most mobile solution to stay in sync!

    Details
    Circuit Happy - Missing Link
    Status: ...
    availability ? ...
    € 19% VAT excl. €175.63 € 19% VAT incl. €209.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Doepfer MSY2 MIDI to DIN-Sync converter

    The MSY2 is an interface which converts MIDI Clock and Start/Stop messages to Roland´s DIN Sync.  Perfect and easy-to-use interface for synchronizing your TR-808, TR-606 TB-303 and other gear to MIDI. Also included is an analog clock output for sequencers or arpeggiators in many different old synths and also modular synthesizers.

    Details
    Doepfer MSY2 Midi-DINSync converter
    Status: ...
    availability ? ...
    € 19% VAT excl. €70.59 € 19% VAT incl. €84.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. E-RM Midiclock+

    The MIDICLOCK+ of Berlin based "E-RM Erfindungsbüro GmbH", E-RM for short, is a simple yet great tool. It is a small box with only one task: generating a unbelievably clean and jitter-free MIDI clock signal for synchronising sequencers DAWs etc. Operation is super easy due to two buttons and an encoder.

    Details
    ERM Midiclock+
    Status: ...
    availability ? ...
    € 19% VAT excl. €163.87 € 19% VAT incl. €195.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. E-RM Modular Whip

    With this short cable whip it is possible to get the analog clock signal generated by the E-RM Midiclock+'s DIN socket directly at 3.5mm minisockets. There are two sockets available: black = clock, red = start/reset. This makes integration with your Eurorack system very easy.

    Details
    ERM Midiclock+
    Status: ...
    availability ? ...
    € 19% VAT excl. €15.97 € 19% VAT incl. €19.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. E-RM Multiclock USB

    The Multiclock USB is a multi-format solution for audio synchronisation. It takes your DAW's audio clock an derives an ultra precise and almost jitter-free clock from it. The clock is emitted at the four outputs, each of which can be separately shifted and can have it's own shuffle setting. Each channel can generate MIDI Clock, DIN-Sync, an analog clock and an analog LFO is possible as well.

    This version is equipped with an additional USB MIDI connector board.

    Details
    ERM Midiclock+
    Status: ...
    availability ? ...
    € 19% VAT excl. €436.13 € 19% VAT incl. €519.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. Future Retro - Swynx

    Small in size but with great features is this sync box that converts MIDI signals into MIDI clock, DinSync24, CR-78 clock and analog clock. Beyond this it can add shuffle to all those clock and sync signals and offers 12 time signatures. Last but not least: you can use the unit as a pattern programmer for the CR-78!

    Details
    /
    Status: ...
    availability ? ...
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Kenton - DIN Sync Splitter

    Splitter cable for making two DIN-Sync signals out of one. For example to synchronise two TB-303s to one TR-808.

    Details
    Kenton DIN Sync Splitter (Doppelstecker)
    Status: ...
    availability ? ...
    € 19% VAT excl. €8.40 € 19% VAT incl. €10.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. Kenton - SYNC-5 (DIN Sync Splitter)

    Small unit for active splitting of an incoming DIN-Sync signal to five DIN-Sync outputs.

    Details
    Kenton - SYNC-5 (DIN Sync Splitter)
    Status: ...
    availability ? ...
    € 19% VAT excl. €63.03 € 19% VAT incl. €75.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Kenton D-Sync

    D-Sync converts incoming MIDI clock data plus start / stop commands into the DIN-Sync format and vice versa. High class, opto-isolated connectors guarantee excellent performance. - The perfect partner for embedding Rolands TR-606, TR-808 and TR-909 as well as the TB-303 Bassline into a MIDI-Setup.

    Details
    Kenton Merge-4
    Status: ...
    availability ? ...
    € 19% VAT excl. €68.07 € 19% VAT incl. €81.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. SND ACME4

    SNDs newest device called ACME4 is a professional centralcontrol system for musical synchronisation signals. The abbreviation ACME stands for "Advanced Clock Management Engine".
    Is is the only device in the world to generate a MIDI master clock that is absolutely jitter-free !!

    Details
    SND ACME4--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €839.50 € 19% VAT incl. €999.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. TouellSkouarn - Triglostek

    The Triglostek is a self-powered DinSync24 to trigger converter, to sync an eurorack to a DinSync24 device. It needs no extra power supply.

    Details
    TouellSkouarn - Hirlostek
    Status: ...
    availability ? ...
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

17 Item(s)

per page

Set Descending Direction
Nur verfügbare anzeigen