9 Item(s)

per page

Set Descending Direction
  1. Doepfer R2M Ribboncontroller

    The R2M is a glide controller combined with a pressure controller where you could play medodies or control parameters in any midi device of your choice. It is an up to date variation of the classical band manual seen in the Trautonium. You will get the controller to play on and the converter with Midiout where you can also edit the way you want to use it.

    Details
    Doepfer R2M Ribbon-Midi Controller
    availability ? immediately available
    € 19% VAT excl. €268.91 € 19% VAT incl. €320.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Haken Audio - Continuum Voltage Converter (CVC)

    The CVC is a high resolution MIDI/control voltage converter to fully exploit the fast data rates and ranges of the Continuum. The Continuum Voltage Converter (CVC) generates control voltage signals that are perfectly suited for interfacing with analog synthesizer systems. The CVC allows for the polyphonic X,Y, and Z outputs of the Continuum to be converted into a total of sixteen continuous control voltages and gates. To achieve this the data output of the Continuum is connected directly to the CVC's data input, avoiding Midi altogether. The CVC is specifically made for the Continuum and will not work with any other device.

    Details
    Haken Audio control voltage converter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €974.79 € 19% VAT incl. €1,160.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Haken Audio Continuum (full size)

    The Continuum Fingerboard is a MIDI performance instrument with an innovative, three-dimensional control surface. Thanks to its polyphonic, modular DSP engine, the Fingerboard can not only be used for playing external hardware and software synthesizers, but as a stand-alone device as well. Sounds produced by the internal sound generator are very atmospheric. The multi-gesture control surface enables musicians to create extremely expressive performances. In detail, movements on the X, Y and Z axes are evaluated. – Of up to 16 fingers! The X-axis is used to generate pitch data. With slight movements to the left and right, users can create vibrato effects. Vigorous wiping gestures over a large area of the playing surface result in seamless, high-resolution glissandi. The Y-axis can be used to generate additional MIDI data. – More or less a modulation wheel per finger. The Z-axis is somewhat of a velocity and polyphonic aftertouch control. Via expanders, users can add more DSP power and CV connectors to their instrument. (Sold separately) The Continuum Fingerboard offered here is the full-size version with a pitch range of nearly eight octaves.

    Details
    Haken Audio Continuum (full size)--9-
    availability ? shortly avaliable
    € 19% VAT excl. €5,798.32 € 19% VAT incl. €6,900.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Haken Audio Continuum (full size) Case

    Case for the Fullsize Continuum. Easy transport thanks to rugged handles and inline skate wheels

    Details
    Haken Audio Continuum (full size) Case--9-
    availability ? shortly avaliable
    € 19% VAT excl. €486.55 € 19% VAT incl. €579.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Haken Audio Continuum (half size)

    The Continuum Fingerboard is a MIDI performance instrument with an innovative, three-dimensional control surface. Thanks to its polyphonic, modular DSP engine, the Fingerboard can not only be used for playing external hardware and software synthesizers, but as a stand-alone device as well. Sounds produced by the internal sound generator are very atmospheric. The multi-gesture control surface enables musicians to create extremely expressive performances. In detail, movements on the X, Y and Z axes are evaluated. – Of up to 16 fingers! The X-axis is used to generate pitch data. With slight movements to the left and right, users can create vibrato effects. Vigorous wiping gestures over a large area of the playing surface result in seamless, high-resolution glissandi. The Y-axis can be used to generate additional MIDI data. – More or less a modulation wheel per finger. The Z-axis is somewhat of a velocity and polyphonic aftertouch control. Via expanders, users can add more DSP power and CV connectors to their instrument. (Sold separately) The Continuum Fingerboard offered here is the half-size version with a pitch range of nearly four octaves.

    Details
    Haken Audio Continuum (half size)--9-
    availability ? shortly avaliable
    € 19% VAT excl. €3,697.48 € 19% VAT incl. €4,400.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Haken Audio Continuum (half size) Case

    heavy case for heavy transport!

    Details
    Haken Audio Continuum (half size) Case--9-
    availability ? shortly avaliable
    € 19% VAT excl. €368.91 € 19% VAT incl. €439.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Haken Audio - CEE rack ears

    Metal rack ears for the Continuum EaganMatrix Expander (CEE) making it possible to mount it in a 19" rack.

    Details
    /
    availability ? shortly avaliable
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Haken Audio - Continuum EaganMatrix Expander (CEE)

    The hardware unit Continuum EaganMatrix Expander (alias CEE) expands the polyphony of the internal sound engine of the Haken Continuum, the EaganMatrix. The expander triples the computation power of the Continuum, thereby tripling the polyphony. This is useful when more than 16 fingers are touching the surface or you play a lot of percusive sounds with long release times.

    Details
    /
    availability ? shortly avaliable
    € 19% VAT excl. €1,092.44 € 19% VAT incl. €1,300.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Snyderphonics - Manta

    Luxury controller for computers and modular systems – The Manta comes equipped with 48 touch sensors, arranged in a hexagonal array. The control elements not just react to body contact, but also evaluate how much surface area a finger is covering. Bicolor background lighting visualizes the status of each sensor. Besides notes and velocity values, the controls also generate MIDI CC data. Additionally to its hexagonal array, the Manta offers two touch sliders and four "buttons". The controller is connected to a computer via USB. For using the Manta with analog equipment, a Manta Mate is required, which is not included.

    Details
    Rossum Electro-Music - Evolution
    availability ? immediately available
    € 19% VAT excl. €743.70 € 19% VAT incl. €885.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

9 Item(s)

per page

Set Descending Direction