modular systems » Eurorack cases

Vessel is a modular case made from aluminum. It offers two rows of 104 HP each. A laboratory grade power supply is built-in. With two ampere on each the +12 V and the -12 V rail plus one ampere on the +5 V rail, the case is well prepared for lots of hungry modules. Two fans ensure that Vessel never gets too hot. Cinch connectors allow you to exchange video sync signals between several cases. Sockets for transmitting CV and gate signals according to the Doepfer standard are available as well.

The Eowave suitcase is light as a feather, yet robust, thanks to its aluminum frame. The case offers 2x 104 HP. Its lid is very deep. Therefore, modules can be transported with patch cables inserted in their connectors. A power supply and two Bus Boards are built-in.

The Eowave Skiff cases are made of metall and feature plastic side panels. The case offered here is 104 HP wide. A power supply with Bus Board is built-in.

The Eowave Skiff cases are made of metall and feature plastic side panels. The case offered here is 84 HP wide. A power supply with Flying Bus Boards is built-in.

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

Compact budget case – The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

Compact budget case – The A-100LC1 is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, which can be colored or coated individually by the owner. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

High end cases for middle-class prices – Intellijel’s aluminum cabinets are sturdy, yet lightweight. They come equipped with reliable, high-performance power supplies.

The 4U Case offered here features a 3 U row and a 1 U row with 104 HP each. The latter can be filled with all kinds of space-saving utility modules, for instance a MIDI CV converter, a quad attenuator and / or a digital reverb processor. The integrated power supply TPS30W MAX delivers 1.5 A at +12 V and -12 V as well as 1 A at +5 V.

Travel Bag for a Mantis case and accessories. It can be carried side-ways or as a backpack. Thanks to the bag’s thick padding and waterproof materials, the case is protected very well. – The perfect partner for taking a Mantis on the road.

Portable and foldable Eurorack case with three rows á 126 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Wenge wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling.
The UNO 126 contains the SILTA power supply solution with 3.75 Ampere, the SEI trunk line module and is supplied with a padded soft bag.

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Pear wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

The Mantis is an inexpensive, yet high grade Eurorack case for studios and live setups. It comprises two rows with 104 HP each. Thanks to an adjustable angle of slope, the enclosure can be adapted to any location.

The Mantis is an inexpensive, yet high grade Eurorack case for studios and live setups. It comprises two rows with 104 HP each. Thanks to an adjustable angle of slope, the enclosure can be adapted to any location.

The Mantis is an inexpensive, yet high grade Eurorack case for studios and live setups. It comprises two rows with 104 HP each. Thanks to an adjustable angle of slope, the enclosure can be adapted to any location.

The Mantis is an inexpensive, yet high grade Eurorack case for studios and live setups. It comprises two rows with 104 HP each. Thanks to an adjustable angle of slope, the enclosure can be adapted to any location.

A pair of optional bright wood side panels for the modular Eurorack case system PLUS by Frap Tools. These panels terminate the otherwise open enclosure and add a precious look.

The Eowave Studio Cases are made of metall. Wooden side panels give them a modern look. The case offered here is angled. It features three rows with 84 HP each. A power supply and Bus Boards are built-in.

The Eowave Studio Cases are made of metall. Wooden side panels give them a modern look. The case offered here is angled. It features two rows with 84 HP each. A power supply and Bus Boards are built-in.

The Gig Bag is a lightweight, padded and robust carrying bag for transporting an Intellijel 4U case (104 HP) or a similar modular case. Additional, lockable compartments offer space for other equipment. Thanks to the Velcro carrying system, the bag can be easily attached to a rolling suitcase. – Great when you have to run from one flight to the next.

The Gig Bag is a lightweight, padded and robust carrying bag for transporting an Intellijel 7U case (104 HP) or a similar modular case. Additional, lockable compartments offer space for other equipment. Thanks to the Velcro carrying system, the bag can be easily attached to a rolling suitcase. – Great when you have to run from one flight to the next.

Travel Bag for a Mantis case and accessories. It can be carried side-ways or as a backpack. Thanks to the bag’s thick padding and waterproof materials, the case is protected very well. – The perfect partner for taking a Mantis on the road.

High-class modular case with an uncompromisingly designed power supply – The ACL case comes equipped with a total of 378 HP for housing modules. It is composed of a sturdy metal frame and wooden side panels. A switching power supply and four bus boards with star-shaped power distribution are built-in. All components work extremely accurate. The result: Security, a very low noise floor and brilliant sound. – A great solution for demanding studio tasks, which is suitable for occasional gigs as well.

High-class modular case with an uncompromisingly designed power supply – The ACL desktop case comes equipped with a total of 378 HP for housing modules. It is composed of a sturdy metal frame and wooden side panels. A switching power supply and four bus boards with star-shaped power distribution are built-in. All components work extremely accurate. The result: Security, a very low noise floor and brilliant sound. – A great solution for demanding studio tasks, which is suitable for occasional gigs as well.

A compact and sturdy featherweight – The Make Noise 7U case is made entirely out of steel. It comes equipped with two 3U rows of 104 HP each for installing modules. Additionally, there is a 1U row housing the CV Bus, a clever routing system for control voltages. A built-in preamp and an output section allow musicians to connect the 7U case to studio or live equipment without the need of an analog interface module. The implemented power supply is considered to be one of the best on the market.

High end cases for middle-class prices – Intellijel’s aluminum cabinets are sturdy, yet lightweight. They come equipped with reliable, high-performance power supplies.

The 7U Case offered here features two 3 U rows and a 1 U row with 104 HP each. The latter can be filled with all kinds of space-saving utility modules, for instance a MIDI CV converter, a quad attenuator and / or a digital reverb processor. The integrated power supply TPS80W MAX delivers 3 A at +12 V and -12 V as well as 1.5 A at +5 V. Thanks to a carrying handle and a solid lid, the 7U case is perfect for mobile setups. The Stealth version comes in black.

Using the Low Cost Monster Base Vintage Edition, musicians can add two module rows with 168 HP each to their Low Cost Monster Case. Alternatively, it is possible to put two smaller low cost cases on top. The Base cabinet is made out of wood. A black coating gives the case some vintage flair. Electricity is supplied via two PSU3 switching power supplies and four bus boards. Thanks to exchangeable fuses, the Low Cost Monster Base can be used all around the globe.

Using the Low Cost Monster Base, musicians can add two module rows with 168 HP each to their Low Cost Monster Case. Alternatively, it is possible to put two smaller low cost cases on top. The Base cabinet is made out of wood. Electricity is supplied via two PSU3 switching power supplies and four bus boards. Thanks to exchangeable fuses, the Low Cost Monster Base can be used all around the globe.

Large cabinet, small price – The Low Cost Monster Case Vintage Edition offers three rows with 168 HP each. In total, 504 HP can be filled with modules. The cabinet is made out of wood. A black coating gives the case some vintage flair. Electricity is supplied via two PSU3 switching power supplies and six bus boards. Thanks to exchangeable fuses, the Low Cost Monster Case can be used all around the globe.

Large cabinet, small price – The Low Cost Monster Case offers three rows with 168 HP each. In total, 504 HP can be filled with modules. The cabinet is made out of wood. Electricity is supplied via two PSU3 switching power supplies and six bus boards. Thanks to exchangeable fuses, the Low Cost Monster Case can be used all around the globe.

High end cases for middle-class prices – Intellijel’s aluminum cabinets are sturdy, yet lightweight. They come equipped with reliable, high-performance power supplies.

The 7U Case offered here features two 3 U rows and a 1 U row with 104 HP each. The latter can be filled with all kinds of space-saving utility modules, for instance a MIDI CV converter, a quad attenuator and / or a digital reverb processor. The integrated power supply TPS80W MAX delivers 3 A at +12 V and -12 V as well as 1.5 A at +5 V. Thanks to a carrying handle and a solid lid, the 7U case is perfect for mobile setups.

Portable and foldable Eurorack case with three rows á 126 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Ovangkol wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling.
The UNO 126 contains the SILTA power supply solution with 3.75 Ampere, the SEI trunk line module and is supplied with a padded soft bag.

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Ovangkol wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

The Eowave Studio Cases are made of metall. Wooden side panels give them a modern look. The case offered here is angled. It features two rows with 104 HP each. A power supply and Bus Boards are built-in.

The Eowave Studio Cases are made of metall. Wooden side panels give them a modern look. The case offered here is flat. It features two rows with 104 HP each. A power supply and Bus Boards are built-in.

The Eowave Studio Cases are made of metall. Wooden side panels give them a modern look. The case offered here is flat. It features two rows with 84 HP each. A power supply and Bus Boards are built-in.

A pair of optional spotted wood side panels for the modular Eurorack case system PLUS by Frap Tools. These panels terminate the otherwise open enclosure and add a precious look.

A pair of optional dark wood side panels for the modular Eurorack case system PLUS by Frap Tools. These panels terminate the otherwise open enclosure and add a precious look.

The single 42 HP wide PLUS Module is the smallest sub-unit of the Eurorack modular enclosure system which grows with your needs.
Individual PLUS Modules can be connected horizontally and grow to larger cases. Instead of selling your small case on the second hand market and purchasing a new one you just expand your exisiting one.

Very solid, 3U high and 84HP wide Skiff case made of metal. It has an integrated 20W power supply and accepts modules with a maximal depth of 45mm

Eyecatcher – The Modular Case 104 is a noble looking, wooden Eurorack frame with excellent tech specs. Two 3U rows with a width of 104 HP are waiting to be filled with oscillators, filters and other circuits. The built-in power supply delivers 2000 mA at +12 V and -12 V as well as 500 mA at -5 V. – Enough power, even for extremely hungry circuits. Furthermore, the Vermona case offers two 1U rows. One of them comes filled with buffered attenuators / mixers and multiples / inverters. The other row is covered by a wooden blind panel.

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with BRIGHT Zebrano wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with WENGE wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

Angle piece for connecting two Modular Row cases in an angle of 45°

Angle piece for connecting two Modular Row cases in an angle of 30°

Inexpensive 19" boat for Eurorack modules. 3U high, without a power supply

Smallest version of the low cost cabinets with one row of 84HP width only. It uses a 1200mA power supply with external transformer.

The Base is a flightcase-style sub-base for any A-100 suitcase or cabinet with 84HP width.
2x 84HP module spade; one row is flat, the other is angled 45°. Contains one power supply and two bus boards