Items 1 to 50 of 60 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Nur verfügbare anzeigen
  1. 2hp - Div

    Looking for a way to snychronize various modules or to trigger some drum modules ? 2Hp Div is a very slim 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between (1, 2, 3, 4, 5, 6, 7 or 8).

    CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.

    Details
    Erica Synths - Pico Drums
    Status: ...
    availability ? ...
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  2. 2hp - Div (Black)

    Looking for a way to snychronize various modules or to trigger some drum modules ? 2Hp Div is a very slim 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between (1, 2, 3, 4, 5, 6, 7 or 8).

    CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.

    Details
    Erica Synths - Pico Drums
    Status: ...
    availability ? ...
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  3. 4ms Breakout module for SCM

    Expansion for the Shuffling Clock Multiplier offering additional possibilities to play with. To be connected with the SCM on the backside.

    Details
    4ms SCM breakout module
    Status: ...
    availability ? ...
    € 19% VAT excl. €115.97 € 19% VAT incl. €138.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. 4ms pedals - Rotating Clock Divider

    Rotating Clock Divider Divide-by-1 to Divide-by-64, on 8 output jacks CV Rotate jack to shift divide-by amount on each jack CV Reset jack to reset/re-sync all jacks Optional break-out panels to expand functionality (MIDI, Auto-reset, selectable Divide-by range)

    Details
    4ms Rotating Clock Divider
    Status: ...
    availability ? ...
    € 19% VAT excl. €149.58 € 19% VAT incl. €178.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. 4ms pedals - Shuffling Clock Multiplier

    Unlike a clock divider, the Shuffling clock multiplier can output a multiplierd, accelerated clock! Three outputs carry a straigh clock, five outputs give you clock signal which can be influenced by the means of shuffling, pushing forward in time or skipping clocks. A CV at the rotate input can alter the multiplication factor of the eight outputs in realtime.

    Details
    4ms Shuffling Clock Multiplier
    Status: ...
    availability ? ...
    € 19% VAT excl. €149.58 € 19% VAT incl. €178.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. 4ms QCD expander

    The QCD Expander adds lots of functionality to the Quad Clock distributor like an attenuator, an inverted output with three different operation modes and a pulse width/delay control. With the expander the QCD will generate non-linear sequences, self-evolving rhythms, swing/shuffle patterns, humanizing and randomness.

    Details
    4ms Rotating Clock Divider
    Status: ...
    availability ? ...
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. 4ms Quad Clock Distributor

    Four voltage controlled clock dividers/multipliers. The clock can be external or it can be tapped with the TapTempo button what makes the module great as a master clock generator. Complex rhythmic patterns are easily achieved by patching multiple channels into each other's Div/Mult CV and Reset sockets.

    Details
    4ms Rotating Clock Divider
    Status: ...
    availability ? ...
    € 19% VAT excl. €200.00 € 19% VAT incl. €238.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. 4ms RCD breakout module

    The breakout module for the Rotating Clock Divider has to be connected to the internal jumpers of the RCD and allows for switching the division factors, counting direction and automatic reset.

    Details
    4ms RCD breakout module
    Status: ...
    availability ? ...
    € 19% VAT excl. €73.95 € 19% VAT incl. €88.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Abstract Data - ADE-32 Octocontroller

    The Octocontroller is your rhythm center, featuring eight clock synchronized modulation/gate channels that can be individually assigned as any one of 12x different modulation types - including Gates & Triggers, LFOs, Loopable S&H and more.
    The timing of each output can be set to any Division or Multiple of the on-board Clock (or an External Clock input) and each output can be offset in phase in eight steps, up to 360°. There is no menu-diving - the top-level features are all accessible using a simple navigation system - however, there are some deeper, user-defineable features that allow the module to be configured to each user's preference.

    Details
    ALM Busy Circuits - Pamela´s Workout--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €310.08 € 19% VAT incl. €369.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. Abstract Data - ADE-33 Event Boss

    The ADE-33 Event Boss is a sophisticated pattern and rhythm generator. Even simple clock signals can be transformed into interesting beats. By feeding the module trigger or gate sequences, it is possible to generate all kinds of variations and interpretations. – Very inspiring, especially while jamming. Alternatively, the Event Boss can be used for clock multiplication / division, phase shifting, probability and logic calculations or as a random generator.

    Details
    ALM Busy Circuits - Pamela´s Workout--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €189.08 € 19% VAT incl. €225.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. Acid Rain Technology - Switchblade

    The Acidrain Switchblade is a useful utility module. It offers a combination of two essential functions: switching and mixing. On three channels there are per channel: two inputs, one output and one trigger / gate input. The inputs can either be switched or added / mixed. The operation is very simple and thanks to multi-coloured LEDs everything is always clear.

    Details
    Cwejman RES-4
    Status: ...
    availability ? ...
    € 0% VAT excl. €108.40 € 0% VAT incl. €108.40
    Excl. VAT, Excl. shippingLieferzeit 1

  12. ALM Busy Circuits - Boss Bow Tie

    Eight-way, bi-directional voltage controlled switch. It switches either one input to eight outputs or vice versa. Consider it a as the core of an A-152 but with added gating function for turning the switching process on and off.

    Details
    Doepfer A-152  Voltg. addressed SundH/Switch
    Status: ...
    availability ? ...
    € 0% VAT excl. €125.21 € 0% VAT incl. €125.21
    Excl. VAT, Excl. shippingLieferzeit 1

  13. ALM Busy Circuits - D.S.G

    The D.S.G module is a triple passive DIN Sync adapter and distributor module. It splits the DIN Sync signal into a start/stop signal and a clock available at two 3.5mm sockets. It works vice versa as well!

    Details
    /
    Status: ...
    availability ? ...
    € 0% VAT excl. €54.62 € 0% VAT incl. €54.62
    Excl. VAT, Excl. shippingLieferzeit 1

  14. ALM Busy Circuits - Pamela´s New Workout

    Multichannel clock source, rhythm generator and LFO - Pamela’s New Workout features eight outputs, which can emit clock signals as well as shapeable waveforms. By combining several channels, it is possible to create snappy beats. Humanize and swing parameters provide the right groove for every occasion. Lots of functions can be modulated. Thanks to the module’s rewritten software and a new OLED display, handling the unit is as easy as with the predecessor. – Even though the functional range grew considerably.

    Details
    ALM Busy Circuits - Pamela´s Workout--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €217.65 € 19% VAT incl. €259.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. ALM Busy Circuits - Pexp-1

    Expander module for Pamela’s New Workout. The circuit adds MIDI and DIN Sync outputs as well as four gate connectors with fixed timing to the clock generator.

    Details
    ALM Busy Circuits - Pamela´s Workout--9-
    Status: ...
    availability ? ...
    € 0% VAT excl. €88.24 € 0% VAT incl. €88.24
    Excl. VAT, Excl. shippingLieferzeit 1

  16. ALM Busy Circuits - Pexp-2 / Px2

    Expander module for Pamela’s New Workout. The circuit adds a 3.5 mm MIDI jack with switchable wiring as well as run and x24 outputs to the clock generator.

    Details
    ALM Busy Circuits - Pamela´s Workout--9-
    Status: ...
    availability ? ...
    € 0% VAT excl. €71.43 € 0% VAT incl. €71.43
    Excl. VAT, Excl. shippingLieferzeit 1

  17. Analogue Systems RS-150 Sequential Switch

    Sequential switch module for switching up to four input signals to one common output. The switching ist done manually or by an incoming trigger signal. the reset function allows for shortening the sequence length.

    Details
    Analogue Systems RS-150  Sequential Switch--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €150.42 € 19% VAT incl. €179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Analogue Systems RS-280 Divider

    The RS-280 is a divider module with a wide frequency range. It can be used to output either clocks with different divisors or sub-octaves of audio signals.

    Details
    Analogue Systems RS-280  Divider--9-
    Status: ...
    availability ? ...
    € 0% VAT excl. €138.66 € 0% VAT incl. €138.66
    Excl. VAT, Excl. shippingLieferzeit 1

  19. Analogue Systems RS-340 Gate Delay

    A Gate Delay does what the name says: it can delay a trigger or gate signal. The RS-340 is a multi-mode gate delay that canoutput not only gates with adjustable length but trigger signals as well.

    Details
    Analogue Systems RS-340 Gate Delay
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. Analogue Systems RS-50 Trigger Generator

    The RS-50 contains three cicuits in one module: trigger generator, pulse shaper and an offset generator called shifter.

    Details
    Analogue Systems RS-50 Trigger Generator--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €142.02 € 19% VAT incl. €169.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. Antimatter Audio - Launch Codes

    Compact performance switch controller for generating triggers and gates. Used manually it provides you with triggers, momentary gates or latched/toggle gates, selectable per each of the five channels.In a sequential context it is a pattern generator with five channels which generates 32 step long sequences which are tapped with your fingers. Patterns can be saved, recalled and chained.

    Details
    Verbos Electronics - Touchplate Keyboard
    Status: ...
    availability ? ...
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Befaco - Burst

    Once triggered, the Burst module generates a flood of impulse signals. Quantity, distribution, timing and probability can not only be edited manually, but influenced via control voltages as well. Burst is ideal for creating dynamic drum effects like rolls or ratcheting and slowly swelling or decaying special effect clouds. Of course, you can also generate triplets, septuplets and the like.

    Details
    Befaco - i² Instrument Interface
    Status: ...
    availability ? ...
    € 19% VAT excl. €157.98 € 19% VAT incl. €188.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. CG-Products - Add1

    The Add1 contains two identical circuits, which can be employed as adders or comparators. Thanks to high precision and some technical finesse, the module is equally suitable for processing audio material as well as control voltages. – Or a mixture of both. Utilized as adders, each circuit can combine up to three signals with an amplification of 1.0. By sending the same material to several inputs, it is possible to achieve amplification factors of 2.0 or 3.0. In comparator mode, the Add1’s circuits emit +5 V or -5 V, depending on whether the sum of incoming signals is higher or lower than 0 V. The results can be used, for example, as gates respectively triggers or audio pulse waves with variable width.

    Details
    CG-Products - Peak+Hold
    Status: ...
    availability ? ...
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  24. Doepfer A-150 Dual VCS

    Two independent voltage controlled switches in one module. You can route signals by switching. Either you switch one input signal between two outputs - or two input signals between one output.

    Details
    Doepfer A-150  Dual VC Switch
    Status: ...
    availability ? ...
    € 19% VAT excl. €45.38 € 19% VAT incl. €54.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Doepfer A-150-8 Octal Manual / Voltage Controlled Programmable Switches

    The A-150-8 comes equipped with eight bi-directional switching channels, which can be controlled manually or via control voltages. Each channel features a main connector called O/I. It is wired with either socket I/O 1 or I/O 2, depending on the state of the switch. Thanks to the module’s bidirectional design, the musician can decide which connector(s) are used as input(s) and output(s). Several channels are linkable in master / slave configurations.

    Details
    A-111-3v Micro Precision VCO (Vintage Edition)
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  26. Doepfer A-150v Dual VCS (Vintage Edition)

    Two independent voltage controlled switches in one module. You can route signals by switching. Either you switch one input signal between two outputs - or two input signals between one output.

    Details
    Doepfer A-150  Dual VC Switch
    Status: ...
    availability ? ...
    € 19% VAT excl. €49.58 € 19% VAT incl. €59.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  27. Doepfer A-151 Quad Sequential Switch

    Electronic switch with up to four steps. At each trigger impulse the input signal is being switched sequentially form the common input to the four inputs. The module works bi-directionally.

    Details
    Doepfer A-151  Quad Sequential Switch
    Status: ...
    availability ? ...
    € 19% VAT excl. €49.58 € 19% VAT incl. €59.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  28. Doepfer A-151v Quad Sequential Switch

    Electronic switch with up to four steps. At each trigger impulse, the input signal is being switched sequentially from the common input to the four inputs. The module works bi-directionally.

    Details
    Doepfer A-151  Quad Sequential Switch
    Status: ...
    availability ? ...
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  29. Doepfer A-160-1 Clock Divider

    The A-160-1 is a frequency divider for clock, trigger and gate signals, designed to be a source of lower frequencies, particularly for rhythmical uses. The available dividers are exclusively even numbers. Additionaly there is a reset input which sets all outputs to "zero".

    Details
    Doepfer A-160 Clock Divider
    Status: ...
    availability ? ...
    € 19% VAT excl. €53.78 € 19% VAT incl. €64.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  30. Doepfer A-160-2 Clock Divider II

    Doepfer's second generation clock divider has been significantly enhanced when compared to the A-160: three sets of clock divisors and two output modes can be selected from and with jupers the reset behaviour and polarity of inputs and output signals can be set. This allows for adjusting the module exactly to your needs.

    Details
    Doepfer A-160 Clock Divider
    Status: ...
    availability ? ...
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  31. Doepfer A-160-5 (Vintage Edition)

    Vintage Edition with a black faceplate and custom knobs.

    Clock multiplier with potentiometer adjustable or voltage controllable multiplying factor. It has three selectable modes, each wit hdifferent factors: integer numbers, power of two factors and a mix of both.
    The module is suited to spped up clocks e.g. for doubletime but also for creating ratcheting sequences where one step generates more than one gate.

    Details
    A-160-5 (Vintage Edition)
    Status: ...
    availability ? ...
    € 19% VAT excl. €88.24 € 19% VAT incl. €105.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  32. Doepfer A-160-5 Clock Multiplier / Ratcheting

    Clock multiplier with potentiometer adjustable or voltage controllable multiplying factor. It has three selectable modes, each wit hdifferent factors: integer numbers, power of two factors and a mix of both.
    The module is suited to spped up clocks e.g. for doubletime but also for creating ratcheting sequences where one step generates more than one gate.

    Details
    Doepfer A-160 Clock Divider
    Status: ...
    availability ? ...
    € 19% VAT excl. €84.03 € 19% VAT incl. €100.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  33. Doepfer A-162 Dual Trigger Delay

    Dual circuitry for delaying trigger signals. Each of the units makes it possible to delay the onset of a trigger pulse and also change its length.

    Details
    Doepfer A-162  Dual Trigger Delay
    Status: ...
    availability ? ...
    € 19% VAT excl. €53.78 € 19% VAT incl. €64.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  34. Doepfer A-163 VC Divider

    Voltage controlled frequency divider with divisors ranging from 1 to aaproximately 20. Even odd divisors are possible! It has a manual control for changing the divisor factor and CV input with polarizer (attenuator / inverter). The output signal is a square wave.

    Details
    Doepfer A-163  VC Divider
    Status: ...
    availability ? ...
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  35. Doepfer A-165 Dual Trigger Modifier

    Two individual inverters and modifiers for logic signals like triggers, gates and clocks. The module is used for adapting levels and logic states to ther units like external sequencers as well.

    Details
    Doepfer A-165  Dual trigger modifier
    Status: ...
    availability ? ...
    € 19% VAT excl. €47.90 € 19% VAT incl. €57.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  36. Doepfer A-166 Logic Module

    In this module we find two sections which work with the principles of Boolean Logic. Each has three inputs with their logic states ("1" = high / "0" = low) being compared, combined and finally output at three logic outputs: AND, OR and exclusive OR (EXOR). In addition there are two logic inverters for switching the logic states.
    The A-166 is a really good module for combining and linking digital signals like clocks, triggers and gates.

    Details
    Doepfer A-166  Logic Module
    Status: ...
    availability ? ...
    € 19% VAT excl. €91.60 € 19% VAT incl. €109.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  37. Doepfer A-167 Analog Comparator

    Analog comparator that compares two analog voltages with each other and derives a gate signal. Either two external signals can be compared or one external voltage with the internally set value. The module can also be used as a subtractor or a offset generator.

    Details
    Doepfer A-167  Analog Comator
    Status: ...
    availability ? ...
    € 19% VAT excl. €49.58 € 19% VAT incl. €59.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  38. Doepfer A-186-1 Gate/Trigger Combiner

    This small module combines up to seven gate or trigger signals and sends them to one output; basically it´s a simple passive mixer for gate signals.

    If all seven inputs are "low" there is no gate at the output. When one or more inputs switch to "high", a gate signal occurs at the output.

    Details
    Doepfer A-186-1  Gate/Trigger Combiner
    Status: ...
    availability ? ...
    € 19% VAT excl. €36.97 € 19% VAT incl. €44.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  39. Eowave - Swing

    Swing makes your sequences groove! The module is a delay stage for clock signals. Three modes of operation are available. Incoming triggers are fed alternately to four outputs with individually adjustable delay times.

    Details
    MFB – Nanozwerg Pro
    Status: ...
    availability ? ...
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  40. Erica Synths - Pico Trigger

    The Pico Trigger not only provides a master clock but it can even generate different trigger patterns which can be up to 16 steps long and feature adjustable shuffle. There are clock divder patterns, polyrhythmic patterns and so on. New patterns can be loaded via the clock input and there's memory for eight patterns.

    Details
    Erica Synths - Pico Trigger
    Status: ...
    availability ? ...
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  41. Intellijel Designs - OR

    Small passive module with two cascaded OR combine units for mixing gate, clock and logic signals.

    Details
    Intellijel Designs OR
    Status: ...
    availability ? ...
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  42. Intellijel designs Plog

    The Plog is a 8HP wide logic module, a perfect tool for switching states, gates, triggers and clocks. Plog comprises two programmable logic sections (select one of six different 3 input boolean logic types) as well as a toggle flipflop and data flipflop block. All four sections are linked together via specially planned normallisations. It was primarily designet to create complex sequences eg. derived from a simple gate sequence or clock.

    Details
    Intellijel designs Plog--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €150.42 € 19% VAT incl. €179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  43. Joranalogue - Compare 2

    Compare 2 is composed of two window comparators, which measure incoming voltages and compare them with flexibly adjustable minimum and maximum values. Depending on whether input signals are within or outside of the range of the defined window, the circuits emit gate signals at their Out or Not connectors. Additionally, there are four logic stages. Compare 2 can be used as a rhythm generator, a dual pulse width modulator, a frequency multiplier / divider with PWM, a ring modulator with PWM, a dynamic depth VCO synchronizer, a voltage controlled swing generator or a logic function array. – Just to name a few possibilities.

    Details
    Cwejman RES-4
    Status: ...
    availability ? ...
    € 19% VAT excl. €151.26 € 19% VAT incl. €180.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  44. Joranalogue - Switch 4

    Switch 4 is a great tool for live performers. The module can be used to quickly turn audio signals or control voltages on and off. Thanks to two types of switching channels, the routing can be changed in no time at all. On top of this, it is possible to use the circuit as a Switched Multiple. Three-way switches allow musicians to active channels momentarily or constantly. High-end components guarantee excellent sound quality. - Not a given, considering the low price.

    Details
    Cwejman RES-4
    Status: ...
    availability ? ...
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  45. Klavis - Logica XT

    Logica XT features twelve function algorithms and two forced states, which can be chosen by hand or via a CV input. Up to three input signals plus manually added gates may be included in the module’s calculations. Results are emitted via a normal and an inverted output. Additionally, there is a Div/2 connector, which changes its state just once per generated signal. Logica XT can process control voltages as well as audio material.

    Details
    Doepfer A-162  Dual Trigger Delay
    Status: ...
    availability ? ...
    € 0% VAT excl. €100.00 € 0% VAT incl. €100.00
    Excl. VAT, Excl. shippingLieferzeit 1

  46. Low-Gain Electronics - ShortBus V3

    The Short Bus is an OR combiner i.e. a mixer for gate, trigger and clock signals. It has seven inputs that can be routed to one of two outputs or to none.

    Details
    Manhattan Analog CVP--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  47. LPZW - WK1

    The WK1 consists of a buffered adder / mixer and a buffered multiple. Both circuits feature three channels. Components with low tolerance values guarantee high precision. The WK1 is intended for processing pitch CV signals, but can be used for other control voltages or audio material as well, of course.

    Details
    Erica Synths - Pico Drums
    Status: ...
    availability ? ...
    € 0% VAT excl. €71.43 € 0% VAT incl. €71.43
    Excl. VAT, Excl. shippingLieferzeit 1 Tag

  48. Make Noise - Tempi

    The Tempi is a surprisingly versatile tool. It offers six independent, simultaneously programmable channels, which generate complex rhythmical information based on divisions and multiplications of a simple clock signal. Thanks to two concepts of operation and a broad range of variation possibilities, the module is able to produce sophisticated grooves. Combined with a modern sequencer, let’s say a René, you get an extremely powerful setup for electronic compositions.

    Details
    Make Noise - Tempi
    Status: ...
    availability ? ...
    € 19% VAT excl. €242.86 € 19% VAT incl. €289.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  49. Metabolic Devices - 2Win

    2Win consists of two voltage-controlled window comparators. This type of circuit is ideal for chopping up audio material or control voltages into pulse waves. – For example, you can extract a whole series of pulses from one cycle of a sine wave. The results are useable for weird PWM effects or rhythmic figures. Envelopes with a re-trigger input can be extended with a loop function. Countless other areas of application are possible as well, of course.

    Details
    Cwejman RES-4
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  50. Mutable Instruments - Branches

    Branches contains two "Bernoulli gates" which decide whether an input trigger signal is being sent to either the first or second output - like a random coin toss. The probability of the random is controllable with a know and a voltage. There are two selectable modes and the gate sections are cascaded.

    Details
    ALM Busy Circuits - Pamela´s Workout--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

Items 1 to 50 of 60 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Nur verfügbare anzeigen