38 Item(s)

per page

Set Descending Direction
  1. Doepfer A-119 External Input

    Pre-amplifier for microphone- and line-signals and an envelope follower. If the signal exceeds a certain (adjustable) threshold a comparator outputs a gate signal which you can e.g. use to fire an envelope. But you can use the module also as a small active multiple.

    Details
    Doepfer A-119  External Input
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Happy Nerding - Out

    A clever analog interface for little money –The Out features two stereo input sections with two connectors (left / right) each. One of these stages is equipped with a volume potentiometer. Inside the module, audio material coming from both input stages gets mixed. The resulting stereo signal can be tapped at two balanced 6.3 mm connectors as well as a headphone output. The volume of sum and HP channels is separately adjustable.
    A jumper allows users to add signal amplification to one of the input sections. Thanks to this feature, the Out is not only usable to convert audio material from modular to studio level, but also vice versa. The module’s sound is clean and unadulterated.

    Details
    Mutable Instruments - Shades
    availability ? coming soon
    € 19% VAT excl. €159.66 € 19% VAT incl. €190.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. NW2S - O16 Balanced Line Driver

    The O16 is an analog multichannel interface for connecting a modular system with other studio equipment. The circuit offers 16 inputs, LEDs visualize incoming signals. Internally, audio material is attenuated by -6 dB, meaning it gets converted to studio level (+4 dBu). Results are emitted via two DB-25 connectors. Balanced line drivers of excellent quality guarantee high-fidelity sound, even with long cable runs. – Finally, modular owners don’t have to think about DI boxes and wiggly adapters anymore.

    Details
    XAOC Devices - Sewastopol
    availability ? coming soon
    € 19% VAT excl. €394.12 € 19% VAT incl. €469.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Erica Synths - Pico Input

    With the Pico Input, line signals from, for example, a synthesizer, drum-computer, audio interface or smartphone can be raised to modular level. The module delivers up to 40 dB of gain. Thanks to its two channels, users can comfortably process mono as well as stereo material.

    Details
    Doepfer A-138p Performance Mixer (Input)
    availability ? immediately available
    € 19% VAT excl. €60.50 € 19% VAT incl. €72.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  5. Intellijel Designs - Headphones 1U

    Works as advertised – Headphones 1U adds a high quality headphone amplifier to Intellijel cases. The module features inputs for left and right channel, a volume potentiometer as well as a 6.3 mm headphone output.

    Details
    Intellijel Designs - Jellysquasher
    availability ? coming soon
    € 19% VAT excl. €66.39 € 19% VAT incl. €79.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  6. Intellijel Designs - Buff Mult 1U

    The Buff Mult 1U expands an Intellijel case with two active, buffered signal splitters. Each circuit comes equipped with one input and four outputs. Thanks to the inputs being normalized, it is also possible to use both splitters in conjunction, meaning one signal can be send to up to eight destinations.

    Details
    Intellijel Designs - Jellysquasher
    availability ? coming soon
    € 19% VAT excl. €36.13 € 19% VAT incl. €43.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  7. Intellijel Designs - Line Out 1U

    The Line Out 1U is an analog interface with one channel. It can be used to send signals from a modular system to professional studio equipment. The module features an input, a level potentiometer and an output.

    Details
    Intellijel Designs - Jellysquasher
    availability ? immediately available
    € 19% VAT excl. €36.13 € 19% VAT incl. €43.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  8. Intellijel Designs - Audio I/O Jacks 1U

    The Audio I/O Jacks 1U forms, in combination with the Audio I/O 1U, an analog interface for exchanging audio material between a modular system and professional studio gear. The circuit features two TRS input and output connectors.

    Details
    Intellijel Designs - Jellysquasher
    availability ? immediately available
    € 19% VAT excl. €18.49 € 19% VAT incl. €22.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  9. Intellijel Designs - Audio I/O 1U

    Connection to the outside world – The Audio I/O 1U forms, in combination with Intellijel’s 7U case or the Audio I/O Jacks 1U, an analog interface for exchanging audio material between a modular system and professional studio gear. The circuit features two input channels with dedicated level potentiometers. Furthermore, there are two outputs, which can be adjusted together. LEDs visualize incoming and outgoing signals as well as clipping.

    Details
    Intellijel Designs - Jellysquasher
    availability ? coming soon
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  10. ACL - Audio Interface

    The ACL Audio Interface is ideally suited for connecting a modular synthesizer to studio respectively stage equipment. The module features two input and output channels with level controls. Studio gear is connected to the Audio Interface via balanced XLR connectors. Besides the main channels, a stereo aux input and a headphone connector were implemented. These channels come equipped with level controls as well. Furthermore, there are routing and mute options. High-grade components and additional features like a soft start function guarantee crystal-clear, natural sound.

    Details
    Verbos Electronics - Voltage Multistage
    availability ? shortly avaliable
    € 19% VAT excl. €386.55 € 19% VAT incl. €460.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. Erica Synths - Black Output Module V2

    Share your music! – The Black Output Module V2 is a high quality stereo mixer, especially designed for handing off modular signals to external studio equipment. Audio material is fed to the circuit via three mono channels with volume potentiometers and (auto) pan functions as well as a similarly equipped stereo input. On the output side, there are two balanced 6.3 mm connectors and a headphone port with level control. – A compact, clean-sounding analog interface for connecting a modular system to a mixer, an audio interface or a monitoring system.

    Details
    Doepfer A-138p Performance Mixer (Input)
    availability ? coming soon
    € 19% VAT excl. €252.10 € 19% VAT incl. €300.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  12. Meng Qi - Please Exist 2 (Quad Transformer I/O)

    Please Exist 2 is an analog interface with passive circuitry. It can be used as a two-channel input or output stage. You may connect line-level synthesizers or drum computers to your Eurorack setup with this module. The other way round, it is possible to send audio signals from the Modular system to other studio equipment. Custom-made transformers and balanced 1/4 inch connectors guarantee very good sound quality.

    Details
    Manhattan Analog CVP--9-
    availability ? immediately available
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Grp Synthesizer - Envelope Follower

    The Grp Envelope Follower scans audio signals and generates a continuous control voltage based on the detected volume. Input level and threshold are adjustable. It is even possible to directly connect a microphone. The amplitude of the generated control voltage can be influenced as well. – It is even possible to invert the CV signals. As soon as the audio material fed to the module reaches the threshold, a trigger signal is generated. Thanks to the Pre Out socket, you don’t need a signal splitter to use the Grp Envelope Follower.

    Details
    UP73R-VCO
    availability ? coming soon
    € 19% VAT excl. €139.50 € 19% VAT incl. €166.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  14. Grp Synthesizer - Stereo Out Module

    The Stereo Out Module sounds as good as it looks. There are four signal inputs, which can be leveled individually. Two of these channels come equipped with panorama potentiometers. The other channels are hard panned to the left and right. Two main outputs with separate volume controls emit the results. VU meters visualize signals coming through here. Furthermore, there are two headphone outputs, which share a level knob.

    Details
    UP73R-VCO
    availability ? coming soon
    € 19% VAT excl. €319.33 € 19% VAT incl. €380.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  15. Folktek - Listen (Gold)

    Listen is composed of two preamplifiers with level control. The circuits are tailored to be used with dynamic and contact microphones. Piezo pickup systems of acoustic guitars can be connected as well, of course. Alternatively, Listen is usable as a all-purpose two-channel-amplifier for boosting weak audio signals.

    Details
    Folktek - Matter (Copper)
    availability ? immediately available
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 21 Tage

  16. Folktek - Listen (Copper)

    Listen is composed of two preamplifiers with level control. The circuits are tailored to be used with dynamic and contact microphones. Piezo pickup systems of acoustic guitars can be connected as well, of course. Alternatively, Listen is usable as a all-purpose two-channel-amplifier for boosting weak audio signals.

    Details
    Folktek - Matter (Copper)
    availability ? immediately available
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 21 Tage

  17. Strymon - AA1 Level Shifter

    The AA1 is able to amplify guitar signals to modular level. – Perfect for processing electric stringed instruments with Eurorack filters, wave shapers and effects. Results can be attenuated to guitar level. – In stereo, if desired.

    Details
    Cwejman RES-4
    availability ? coming soon
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Intellijel Designs - Pedal I/O Jacks 1U

    Pedal I/O Jacks 1U adds Send and Return connectors to the Pedal I/O 1U.

    Details
    Intellijel Designs - Jellysquasher
    availability ? immediately available
    € 19% VAT excl. €18.49 € 19% VAT incl. €22.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  19. Intellijel Designs - Pedal I/O 1U

    Pedal I/O 1U and Pedal I/O Jacks 1U serve as an analog interface for conveniently integrating stomp boxes into modular setups. The other way round, guitarists can use the modules to connect their instrument to Eurorack filters, ring modulators, wave shapers and so forth. A tube-like overdrive is built-in.

    Details
    Intellijel Designs - Jellysquasher
    availability ? coming soon
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  20. Mutable Instruments - Ears

    Ears is an amplifier with built-in contact microphone. The user can generate noises and percussion sounds simply by scratching, rubbing or tapping the surface of the module. In addition to audio material, the circuit also emits Gate and CV signals. Therefore, Ears can be used as an analog controller as well. Thanks to its Hi-Z input, it is also possible to employ the module as an amplifier for external microphones, guitars or line equipment. The amp provides up to 40 dB of gain.

    Details
    Mutable Instruments - Shades
    availability ? shortly avaliable
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. Frap Tools - SEI

    SEI is a trunk line for the UNO cases made by Frap Tools. The module has six color-coded 3.5 mm sockets built-in its front panel. They are connected to six 6,3 mm jack plugs, which can be mounted to the back of a UNO case. These sockets are color-coded as well. All lines can be used bi-directionally. Therefore, SEI is perfect to add external synthesizers, samplers and even effect processors to a modular setup without having to rely on tangled cables or bulky adapters.
    Furthermore, SEI provides a powered USB port for connecting a gooseneck lamp.

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    availability ? immediately available
    € 19% VAT excl. €75.55 € 19% VAT incl. €89.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. WMD Pro Output

    Stereo audio interface from your Eurroack synthie to Pro Audio gear. It has a very high headroom of 13Vpp, low noise and low distortion. The quarter inch outputs are balanced and a headphone amp is integrated as well.

    Details
    WMD Pro Output
    availability ? immediately available
    € 19% VAT excl. €214.29 € 19% VAT incl. €255.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Intellijel designs uJack

    Handy module for monitoring your modular synth. It is suited for mono and stereo signals, has an adjustable headphone output and two 6.35mm outputs for left and right channel.

    Details
    Intellijel designs uJack--9-
    availability ? immediately available
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. Intellijel Designs Audio Interface II

    The Audio Interface is a two-channel input/output module for inserting external, balanced audio signals into the modular system respectively for sending balanced signals from the modular to your studio environment. Besides that the module has a level boost function and VU metering.

    Details
    Intellijel Designs Audio Interface II
    availability ? coming soon
    € 19% VAT excl. €239.50 € 19% VAT incl. €285.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Vermona TAI-4

    The TAI-4 by Vermona is a 2x2 channel audio interface module for balancing signals coming from the modular system and for un-balancing audio signals that are sent to the modular.

    Unlike other modules of that kind that work with electrical balancing, the TAI-4 has isolating transformers and thus features true balancing.

    Details
    Vermona modular TAI-4
    availability ? immediately available
    € 19% VAT excl. €276.47 € 19% VAT incl. €329.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  26. Cwejman AP-1 Audio-Processor

    The Audio Processor AP-1 is an indispensable module for everybody who wants to process external audio signals in modular systems. The AP-1 provides you with three sections. Pre-amp, envelope follower and compressor.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman AP-1 audio processor
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €557.14 € 19% VAT incl. €663.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  27. Cwejman AI-2 Audio-Interface

    The Audio Interface AI-2 is a very helpful tool for converting unbalanced audio signals into balanced and vice versa. That is indispensable for making professional recordings in studio quality or for processing audio signals interference free in the studio or on stage.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman AI-2 audio interface--9-
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €281.51 € 19% VAT incl. €335.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  28. Analogue Systems RS-35 External Processor

    The RS-35 External Processor contains three circuits for extracting coltrol voltages from an audio signal: A frequency-to-voltage generator, a level-to-voltage generator and a trigger generator.

    Details
    Analogue Systems RS-35  External Processor--9-
    availability ? shortly avaliable
    € 19% VAT excl. €210.08 € 19% VAT incl. €250.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  29. Vermona modular twinOut

    A DI box in module format, balancing signals electrically. It has 3.5mm inputs and XLR male outputs, can work stereo and mono and also has a line output you can use as a headphone out
    If you don't need XLR inputs, transformer balancing and want to omit the size of Vermonas TAI-4, go for it's smaller brother!

    Details
    Vermona modular twinOut--front
    availability ? immediately available
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  30. XAOC Devices - Sewastopol 2

    Sewastopol contains a number of circuits for integrating external audio and to extract signals from them. Use it as an input and output interface with optional soft clipping, as a FX send & return for using external effect units with your modular, as a comparator and as envelope follower. Latter two functions can be used individually with other signals than the external audio.

    Details
    XAOC Devices - Sewastopol
    availability ? immediately available
    € 19% VAT excl. €218.49 € 19% VAT incl. €260.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  31. CG-Products - Pre

    The module is specialized in one thing exactly - pre-amplifying microphones, pickups and instruments in excellent, low-noise quality!

    Details
    CG-Products - Peak+Hold
    availability ? immediately available
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  32. Erica Synths - Pico Output

    A stereo output module with a headphone socket and level control in just three HP space, that is possible with Erica Synths' Pico series only.

    Details
    Erica Synths - Pico Output
    availability ? immediately available
    € 19% VAT excl. €80.67 € 19% VAT incl. €96.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  33. CG-Products - Peak+Hold

    Very unique module which is specialized in generating a number of control voltages, gates and triggers simultaneously in dependance of a input wignal which primarely is a piezo sensor. The module aims to percussionists which, for instance, would like to generate dynamic control voltages with a drumstick in order to play the modular.

    Details
    CG-Products - Peak+Hold
    availability ? immediately available
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  34. Doepfer A-139-2 Headphone Amplifier

    The A-139-2 is a headphone amplifier module with two mono inputs and a stereo headphone output. It might as well be used for driving small loudspeakers, LED strips, small magents etc.

    Details
    Doepfer A-160 Clock Divider
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  35. Befaco - i² Instrument Interface

    The i² Instrument Interface has to be considered a practical tool for extracting voltages from an injected audio signal, e.g. to generate dynamic modulations by various control voltages and to generate triggers and gates. The module has a pre-amp and a band pass filter as well.

    Details
    Befaco - i² Instrument Interface
    availability ? immediately available
    € 19% VAT excl. €180.67 € 19% VAT incl. €215.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  36. NW2S - IO Balanced

    The eternal sorrow with integrating the modular system in a studio environment: either there aren't enough channels, you need a special cable, the level can't be adjusted or it sounds like crap. Meh.
    Ith IO by nw2s offer 2+2channels on 10HP and integrates your Eurorack just like any other rack unit thanks to a well-thought-out concept and DB-25 connectors in Tascam format.
    This version features electrical balancing on all channels and level adaptation on the inputs and outputs.

    Details
    XAOC Devices - Sewastopol
    availability ? coming soon
    € 19% VAT excl. €394.12 € 19% VAT incl. €469.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  37. NW2S - IO Unbalanced

    The eternal sorrow with integrating the modular system in a studio environment: either there aren't enough channels, you need a special cable, the level can't be adjusted or it sounds like crap. Meh.
    Ith IO by nw2s offer 2+2channels on 10HP and integrates your Eurorack just like any other rack unit thanks to a well-thought-out concept and DB-25 connectors in Tascam format.
    This version of the IO is unbalanced and offers gain reduction on the outputs.

    Details
    XAOC Devices - Sewastopol
    availability ? immediately available
    € 19% VAT excl. €180.67 € 19% VAT incl. €215.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  38. Befaco - Output V3

    The Output module is a balanced stereo master interface for modular systems. Using the integrated volume control, two audio channels can be converted from Eurorack to studio level. A headphone pre-amplifier allows you to play your modular system at night. – Without disturbing the neighbors. Thanks to a separate Cue input, the headphone channel can also be used for pre-listening sounds.  – A great feature for gigs! The third version of Befaco’s analog interface comes equipped with completely redesigned circuits to guarantee the best sound quality possible.

    Details
    Befaco - i² Instrument Interface
    availability ? coming soon
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

38 Item(s)

per page

Set Descending Direction