Items 1 to 50 of 264 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
Nur verfügbare anzeigen
  1. 1010 Music - MX4 Buffered MIDI Multiple

    Compact MIDI splitter – With the MX4, users can send MIDI data from a keyboard or sequencer to up to four instruments and effect units. Input and outputs are configured as 3.5 mm jack connectors. Thanks to the included adapters, devices with DIN sockets can be connected as well.

    Details
    Make Noise Phonogene (v.372)--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €82.35 € 19% VAT incl. €98.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. 2hp - DC

    DC is an offset generator featuring three channels. It emits voltages in the following ranges: 0 V to +5 V, -5 V to +5 V, and 0 V to +10 V.

    Details
    Erica Synths - Pico Drums
    Status: ...
    availability ? ...
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  3. 2hp - DC (Black)

    DC is an offset generator featuring three channels. It emits voltages in the following ranges: 0 V to +5 V, -5 V to +5 V, and 0 V to +10 V.

    Details
    Erica Synths - Pico Drums
    Status: ...
    availability ? ...
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  4. 2hp - Mix

    The 2hp Mix is currently the most compact mixer for modular systems. The module is suitable for both audio signals and control voltages. Up to four inputs can be summed to one output. Each channel has a potentiometer with which the level can be adjusted. Excellent audio quality and extremely low-noise mixer in just 2 hp!

    Details
    Erica Synths - Pico Drums
    Status: ...
    availability ? ...
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  5. 2hp - Mix (Black)

    The 2hp Mix is currently the most compact mixer for modular systems. The module is suitable for both audio signals and control voltages. Up to four inputs can be summed to one output. Each channel has a potentiometer with which the level can be adjusted. Excellent audio quality and extremely low-noise mixer in just 2 hp!

    Details
    Erica Synths - Pico Drums
    Status: ...
    availability ? ...
    € 19% VAT excl. €82.35 € 19% VAT incl. €98.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  6. 4ms Audio Jumper 3-Pin Cable

    overstock selling out now

    The Audio Jumper 3-Pin Cable can be used to connect two Listen 4, Listen 4 Quarters and / or Listen IO modules to form a larger mixer. It is also possible to connect a WAV recorder with a Listen module for direct recording.

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €1.68 € 19% VAT incl. €2.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. 4ms Listen Four

    The 4ms Listen Four is a four-channel stereo mixer with line / modular and headphone outputs. If the four stereo channels are not enough, multiple Listen Four modules can be daisy-chained together to form a large mixer setup with sub-mix outputs. Furthermore, the module can be connected to the 4ms WAV Recorder in the back, making it very easy to capture the final stereo mix of the modular system.

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €150.42 € 19% VAT incl. €179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. 4ms Listen Four Quarters

    Listen Four Quarters is a four-channel stereo mixer with line and headphone outputs. Left and right outputs are 1/4 jack sockets, making it ideal as an end-of-chain mixer and final output for integrating with your studio equipment. If the four stereo channels are not enough, multiple Listen Four modules can be daisy-chained together to form a large mixer setup with sub-mix outputs. Furthermore, the module can be connected to the 4ms WAV Recorder in the back, making it very easy to capture the final stereo mix of the modular system.

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €166.39 € 19% VAT incl. €198.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. 4ms Listen Up

    The 4ms Listen Up is a small passive expander for Listen Four and Listen IO that provides 1/4" stereo jack inputs and outputs. Listen Up is connected to one or two Listen modules and/or WAV recorder modules using the included 3-pin cables. There are four sockets arranged in two stereo pairs. The left jack of each pair can be used as a TRS stereo jack if the right jack is unpatched.

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. 4ms Shifting Inverting Signal Mingler (SISM)

    Super practical four-channel voltage manipulator for scaling, attenuating, inverting and mixing signals. Offset can be generated by the SISM as well and the slice function extracts the sums of all positive or negative voltages. Plenty of LEDs show what's going on with your signal.

    Details
    4ms - Shifting Inverting Signal Mingler SISM - front
    Status: ...
    availability ? ...
    € 19% VAT excl. €138.66 € 19% VAT incl. €165.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. ACL - Gate Mix

    The Gate Mix is composed of four channels. Each features a level potentiometer and a mute stage. The latter can be controlled via a switch or a gate input. Besides the master connector, there are two additional outputs, which emit a mixture of channel one and two respectively three and four. Therefore, it is not only possible to use the module as one four channel mixer, but also as two mixers with two channels each.
    Utilizing the circuit’s Aux input, users are able to add a fifth signal to the mix. This channel doesn’t offer level or mute options, though.

    Details
    Verbos Electronics - Voltage Multistage
    Status: ...
    availability ? ...
    € 19% VAT excl. €226.05 € 19% VAT incl. €269.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. ACL - Multi II

    ACL’s Multi II consists of an active and a passive signal distributor. The buffered multiple features a normal and an inverted input, followed by a mixer. Results are emitted via five outputs. The non-buffered multiple comes equipped with a total of seven connectors, which can be used in a 1 to 6 configuration. High precision components with low tolerance values guarantee reliable, trouble-free operation and an extremely low signal drift.

    Details
    Manhattan Analog MA35 VCF/A--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €82.35 € 19% VAT incl. €98.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. ACL - Sinfonion

    The ACL Sinfonion is an innovative harmonic processor. It features three independent quantizers, a four-voice chord generator and an arpeggiator. Furthermore there is a complex progression sequencer, which lets you create full-blown songs with four parts and up to 32 sections. – An amazing tool for making complex music with your modular setup.

    Details
    Manhattan Analog MA35 VCF/A--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €806.72 € 19% VAT incl. €960.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. ADDAC 812A LED Audio Meter

    Dual LED meter with a range of 0 V to +10 V.

    Details
    Intellijel Designs - Jellysquasher
    Status: ...
    availability ? ...
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  15. ADDAC 812V LED Voltage Meter

    Dual LED meter with a range of -5 V to +5 V.

    Details
    Intellijel Designs - Jellysquasher
    Status: ...
    availability ? ...
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  16. AJH Synth - MiniMod CV Mix / Offset / VCA - BLACK

    The CV-Mix-Offset-VCA is a bipolar mixer with four channels. It was designed especially for processing CV signals. Most inputs come equipped with a special feature. The first channel, for instance, can be employed as a voltage source. The fourth instance is usable as an offset generator. After the mixing stage, there is a linear VCA in the module’s signal flow. It comes equipped with a master level potentiometer and a CV input.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €166.39 € 19% VAT incl. €198.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. AJH Synth - MiniMod CV Mix / Offset / VCA - SILVER

    The CV-Mix-Offset-VCA is a bipolar mixer with four channels. It was designed especially for processing CV signals. Most inputs come equipped with a special feature. The first channel, for instance, can be employed as a voltage source. The fourth instance is usable as an offset generator. After the mixing stage, there is a linear VCA in the module’s signal flow. It comes equipped with a master level potentiometer and a CV input.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €150.42 € 19% VAT incl. €179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. AJH Synth - MiniMod Glide/Noise (black)

    Version in vintage black design

    In just 6HP two Minimoog circuits are integrated; the transistor noise with three timbres and the glide generator with it's unique characteristic.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. AJH Synth - MiniMod Glide/Noise (silver)

    In just 6HP two Minimoog circuits are integrated; the transistor noise with three timbres and the glide generator with it's unique characteristic.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €142.02 € 19% VAT incl. €169.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. AJH Synth - MiniMod Glide/Noise MkII - BLACK

    Version in vintage black design

    In just 6HP two Minimoog circuits are integrated; the transistor noise with three timbres and the glide generator with it's unique characteristic.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. AJH Synth - MiniMod Glide/Noise MkII - SILVER

    In just 6HP two Minimoog circuits are integrated; the transistor noise with three timbres and the glide generator with it's unique characteristic.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. AJH Synth - MiniMod Sample Hold + Slew - BLACK

    Sample Hold & Slew from AJH Synth features a versatile Sample and Hold circuit designed by Tony Allgood, built under license from Oakley Sound. It can be clocked from an external source or by the inbuilt clock generator, whose speed rate can be monitored by an LED.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €242.86 € 19% VAT incl. €289.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. AJH Synth - MiniMod Sample Hold + Slew - SILVER

    Sample Hold & Slew from AJH Synth features a versatile Sample and Hold circuit designed by Tony Allgood, built under license from Oakley Sound. It can be clocked from an external source or by the inbuilt clock generator, whose speed rate can be monitored by an LED.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €226.05 € 19% VAT incl. €269.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. AJH Synth - V-Scale Active Multi BLACK

    The V-Scale Active Multi is a buffered precision multiple with one input and five outputs. Thanks to its high input impedance (20 MOhm), low output impedance and a DC voltage offset of less than 0,003 volt this module is an excellent choice for splitting CV pitch signals. Four of the five outputs come equipped with small trim potentiometers to allow fine adjustments.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. AJH Synth - V-Scale Active Multi SILVER

    The V-Scale Active Multi is a buffered precision multiple with one input and five outputs. Thanks to its high input impedance (20 MOhm), low output impedance and a DC voltage offset of less than 0,003 volt this module is an excellent choice for splitting CV pitch signals. Four of the five outputs come equipped with small trim potentiometers to allow fine adjustments.

    Details
    AJH Synth - MiniMod Glide/Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  26. ALM Busy Circuits - Beast´s Chalkboard

    Dual octave switcher and voltage generator. For instance you can use this module to add a octave switch to a VCO that lacks one. On the other hand it can be used to transpose sequences by octaves or even as a buffered multiple.

    Details
    ALM Busy Circuits - Beast´s Chalkboard--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  27. ALM Busy Circuits - O/A/x2

    An useful, small dual module featuring a bipolar attenuator and an offset generator per channel. Use it for editing CVs like changing phase, level and DC offset or for attenuating and mixing audio signals.

    Details
    ALM Busy Circuits - O/A/x2
    Status: ...
    availability ? ...
    € 19% VAT excl. €74.79 € 19% VAT incl. €89.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  28. Analogue Systems RS-130 Programmable Scale Generator

    arabesque? indian? oriental?

    The Programmable Scale Generator exceeds the possibilities of an ordinary quantiser module. While a quantiser usually is chromatic only and with a little luck it allows major and minor scales, a programmable scale generator like the RS-130 makes it possible to freely program scales beyond the customary semitone scale with all their derivates. Scales with quarter-note or eighth-note intervals are possbile which is important e.g. for indian or oriental music.

    Details
    Analogue Systems RS-130 PSG--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €419.33 € 19% VAT incl. €499.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  29. Analogue Systems RS-160 CV Mixer (Dual Bus)

    The RS-160 is a 4-channel mixer with independent, linear response Level controls for each input, and an overall Level control for the output. Designed primarily for use with control voltages, you can use it for all analogue CVs and audio signals (mixing the two if desired) and you can invert the polarity of the output. These features allow you to create complex controllers for special effects, and are particularly useful for creating audio effects. A mixer in established Analogue Systems quality!

    Details
    Analogue Systems RS-160 CV Mixer--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €82.35 € 19% VAT incl. €98.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  30. Analogue Systems RS-165 Audio Mixer

    The RS-165 is a 4-channel mixer with independent, logarithmic response Level controls for each input, and an overall Level control for the output. Designed primarily for use with audio signals, you can use it for all analogue CVs and audio signals (mixing the two if desired) and you can attenuate the output. These features allow you to create complex controllers for special effects, and are particularly useful for creating audio effects. An audio mixer in established analogue systems quality!

    Details
    Analogue Systems RS-165  Audio Mixer--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €91.60 € 19% VAT incl. €109.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  31. Analogue Systems RS-170 Multiples

    Classic multiples module for splitting signals, e.g. for sending one modulation to different destinations. It contains two passive five-way multiples.

    Details
    Analogue Systems RS-170  Multiples--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  32. Analogue Systems RS-230 CV Buffer

    The CV Buffer is a dual active multiples. With this module you can split signals without level loss. Besides that each unit has an inverted output so an inverter is included, too!

    Details
    Analogue Systems RS-230  CV Buffer--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €82.35 € 19% VAT incl. €98.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  33. Analogue Systems RS-250 Trunk Line

    The RS-250 is basically only a faceplate with ten 3.5mm jacks not connected to anything, not even to each other. On the back all contacts are accessible to make your own solder connections.

    The module makes sense if you want to send e.g signals from your modular system to sockets located in the back of your case. This is a particularly convenient way to make semi-permanent connections to other devices, especially when your modular is installed in a closed rack. It also allows you to connect your modular´s audio outputs to a rackmount patchbay, effects units, or mixer

    Details
    Analogue Systems RS-250  Trunk Line
    Status: ...
    availability ? ...
    € 19% VAT excl. €41.18 € 19% VAT incl. €49.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  34. Analogue Systems RS-260 Quantiser

    This quantiser module corrects voltages according to the chromatic semitone scale i.e. one Volt is divided into 12 voltage steps of same size (1/12 V). The input voltage will be adjusted to the next semitone step. This is handy when you want to play tonally with your sequencer, sample and hold or any voltage generator. Beyond this the RS-260 allows for transposition and has two operation modes.

    Details
    Analogue Systems RS-260  Quantiser--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  35. Analogue Systems RS-270 Converter

    This passive module is a handy converter between different connector formats: 6.35mm jack (1/4"), 3.5mm jack (1/8"), and phono (alias`RCA` or `cinch`) at channels 3 and 4.

    Details
    Analogue Systems RS-270 Adapter Converter--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €66.39 € 19% VAT incl. €79.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  36. Analogue Systems RS-350 Slew Limiter

    The RS-350 is a voltage controlled Slew Limiter that can be swithced on or off by a positive going gate signal which simplifies creation of TB303-like sequences.

    Details
    Analogue Systems RS-350  Slew Limiter--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  37. Analogue Systems RS-40 S&H/Clock/Noise

    The RS-40 contains three different circuits: noise generator, sample and hold and a clock generator. The noise and the clock provide suitable signals for the use with the S&H unit although they aren't pre-patched for technical reasons.

    Details
    Analogue Systems RS-40  SundH/Clock/Noise--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €150.42 € 19% VAT incl. €179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  38. Analogue Systems RS-420 Octave Controller

    Multi functional octave controller module with CV buffering and an in-buit slew limiter for portamento effects. A perfect companion for sequencing applications as you can individualy change octaves of up to three VCOs and you can globally transpose them as well. But also in combination with voltage controlled LFOs the module is really great as you can easily double or halve etc. their frequencies for living modulations.

    Details
    Analogue Systems RS-420  Octave Controller--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  39. Analogue Systems RS-70 Inverter/Preamp

    In the RS-70 module you will find an inverter with integrated slew limiter and also a pre-amp.

    Details
    Analogue Systems RS-70 Inverter/Preamp--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €142.02 € 19% VAT incl. €169.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  40. Antimatter Audio - Sub Ring

    An utterly multi-functional mixer module which we recommend as a VCO mixer. Of course you can use it as a plain five-channel-mixer with 1.5x amplification, but due to smart normalizations this puppy combines the miximg function with a dual sub-octave generator, a noise generator and a ring modulator. 100% analog!

    Details
    Malekko  Fade--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  41. Antimatter Audio - V3KT

    The V3KT from Antimatter Audio is a compact four-channel morphing vector mixer and quadraphonic panner for modular setups. The module consists of four interconnected sections which can be used in various ways, allowing to mix four sources to one output or to distribbute one input to four outputs. Additionaly, four CV sources are available, visualised thanks to LEDs. The signal path is DC-coupled which make it suitable for audio as well as CV sources. Connect a joystick and start creating complex and interactive patches!

    Details
    Malekko  Fade--9-
    Status: ...
    availability ? ...
    € 19% VAT excl. €175.63 € 19% VAT incl. €209.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  42. Befaco - A*B+C

    Dual four-quadrant multiplier with voltage controlled offset. Each of the two sections can be used in a number of ways, for instance as a voltage controlled polarizer, as a ring modulator or as a VCA. Used together both sections can form a four-channel mixer.

    Details
    Befaco - i² Instrument Interface
    Status: ...
    availability ? ...
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  43. Befaco - Hexmix

    Modular mixing console – Hex Mix comes equipped with six channel strips, each featuring a three-band equalizer, pan and volume knobs plus a mute switch. An additional EQ is situated in the stereo master channel. It was designed for processing mix signals. Furthermore, the master channel offers a volume potentiometer and soft compression. Voltage controlled leveling stages, aux sends and returns as well as direct outs and a headphone output with PFL routing options can be added using the modules Hex Mix VCA and Hexpander. However, if you want to start small, go for the Hex Mix only.

    Details
    Befaco - i² Instrument Interface
    Status: ...
    availability ? ...
    € 19% VAT excl. €399.16 € 19% VAT incl. €475.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  44. Befaco - Hexpander

    The Hexpander adds lots of nifty features to Befaco’s Hex Mix. Most important highlight: Three aux sends, which feature knobs for crossfading between pre-fader and post-fader outputs. The stereo returns can be fed with audio material coming from other modules or line level equipment. Furthermore, there are direct outputs for all six channels of the Hex Mix. On top of that, the Hexpander adds a headphones connector with PFL routing options, two 1/4" master outs and LED meters.

    Details
    Befaco - i² Instrument Interface
    Status: ...
    availability ? ...
    € 19% VAT excl. €284.87 € 19% VAT incl. €339.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  45. Befaco - Sampling Modulator

    Innovative multi-function module – The Sampling Modulator can be used as a rhythm generator, a clock divider, a sequencer controlled sample & hold circuit, an analogue down sampling effect, a wave shaper or as an oscillator. While being employed as an S&H unit, the module is able to create straightforward as well as shuffled or polyrhythmic results. Used like a trigger sequencer, the Sampling Modulator offers up to eight steps. Utilized as a down sampler or wave shaper, the module can generate 8-Bit textures as well as metallic or harsh, distorted sound colorations. While being used as an oscillator, the circuit generates pulse waves with variable timbre. It is playable in the range of four octaves.

    Details
    Befaco - i² Instrument Interface
    Status: ...
    availability ? ...
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  46. Befaco - Stmix

    Small "utility" stereo mixers are very rare in Eurorack. Befaco jumps into the breach with the STMix and offers with it a solution that offers many channels in a small space.

    Details
    Befaco - i² Instrument Interface
    Status: ...
    availability ? ...
    € 0% VAT excl. €124.37 € 0% VAT incl. €124.37
    Excl. VAT, Excl. shippingLieferzeit 1

  47. Birdkids - Mixer / Noise

    Exactly as you might expect it this module combines a mixer and a noise generator. Latter is pre-patched to one of the mixer channels but can be removed from the mix and tapped separately.

    Details
    Birdkids - Mixer / Noise
    Status: ...
    availability ? ...
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  48. Buchla Red Panel - Model 106 - 6ch Discrete Transistor Mixer

    The Red Panel Model 106 is based on the mixer of Buchla’s 100 series. The module features six input channels with level potentiometers and four (sub) outputs. Thanks to its transistor circuitry and low headroom, the Model 106 has a very distinctive sound. High input levels lead to warm, nonlinear distortion. However, signals are never getting destroyed. Rather, the module adds some beefy analog flavor.

    Details
    Kenton USB SOLO Converter
    Status: ...
    availability ? ...
    € 19% VAT excl. €268.07 € 19% VAT incl. €319.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  49. Buchla Red Panel - Model 156M - Dual Channel CV Processor

    The Model 156 Control Voltage Processor was developed as a front end for the dual oscillator of Buchla’s 100 series. The module is composed of two circuits, each can mix, offset, compress and invert signals. Red Panels Model 156M transfers the classic Buchla concept to the Eurorack world. Thanks to its overhauled design, the Model 156M is fully compatible with the 1v / octave standard. An exact clone of Buchla’s Control Voltage Processor is available under the name Model 156.

    Details
    Kenton USB SOLO Converter
    Status: ...
    availability ? ...
    € 19% VAT excl. €268.07 € 19% VAT incl. €319.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  50. Buchla Red Panel - Model 156V - Dual Channel CV Processor

    The Red Panel Model 156 Control Voltage Processor was developed as a front end for the dual oscillator of Buchla’s 100 series. The module is composed of two circuits, each can mix, offset, compress and invert signals. Red Panels Model 156 is an exact clone featuring a discrete transistor design. True to the original, the circuits aren’t fully compatible with the 1v/octave standard. – After all, the Model 156 was designed to be partnered with touch plate controllers and non-quantized sequencers. A newly designed, fully Eurorack compatible version of the Control Voltage Processor is available under the name Model 156M.

    Details
    Kenton USB SOLO Converter
    Status: ...
    availability ? ...
    € 19% VAT excl. €268.07 € 19% VAT incl. €319.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

Items 1 to 50 of 264 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
Nur verfügbare anzeigen