Items 151 to 300 of 1299 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
  1. Analogue Systems RS-130 Programmable Scale Generator

    The Programmable Scale Generator exceeds the possibilities of an ordinary quantiser module. While a quantiser usually is chromatic only and with a little luck it allows major and minor scales, a programmable scale generator like the RS-130 makes it possible to freely program scales beyond the customary semitone scale with all their derivates. Scales with quarter-note or eighth-note intervals are possbile which is important e.g. for indian or oriental music.

    Details
    Analogue Systems RS-130 PSG--9-
    availability ? shortly avaliable
    € 19% VAT excl. €427.73 € 19% VAT incl. €509.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Analogue Systems RS-140 MIDI/CV Converter

    The RS-140 converts MIDI messages into control voltages and due its numerous analog outouts it gives you plenty of possibilities to control your modular system with MIDI. Besides the usual CV and gate outputs if has in addition flexible controller outputs and it´s big backlit display and four function buttons make it easy to use.

    Details
    Analogue Systems RS-140 MIDI/CV Converter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €385.71 € 19% VAT incl. €459.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Analogue Systems RS-150 Sequential Switch

    Sequential switch module for switching up to four input signals to one common output. The switching ist done manually or by an incoming trigger signal. the reset function allows for shortening the sequence length.

    Details
    Analogue Systems RS-150  Sequential Switch--9-
    availability ? immediately available
    € 19% VAT excl. €150.42 € 19% VAT incl. €179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Analogue Systems RS-160 CV Mixer

    3U mixer module for mixing four signals to one output.

    Details
    Analogue Systems RS-160 CV Mixer--9-
    availability ? shortly avaliable
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Analogue Systems RS-165 Audio Mixer

    3U mixer module for mixing four audio signals to one output.

    Details
    Analogue Systems RS-165  Audio Mixer--9-
    availability ? shortly avaliable
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Analogue Systems RS-170 Multiples

    Classic multiples module for splitting signals, e.g. for sending one modulation to different destinations. It contains two passive five-way multiples.

    Details
    Analogue Systems RS-170  Multiples--9-
    availability ? shortly avaliable
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Analogue Systems RS-180 VCA

    VCA module with exponential and linear control inputs. This way it can be controlled by any type of control voltages and it is suitable to control both audio signals and CVs.

    Details
    Analogue Systems RS-180  VCA--9-
    availability ? immediately available
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Analogue Systems RS-200 sequencer

    A true analog step sequencer with three rows of eight steps for generating control voltages and trigger signals. The RDS200 impresses with an internal, voltage controllable clock generator, portamento, reset start/stop functions and a voltage influenced skip feature.

    Details
    Analogue Systems RS-200  Sequenzer--9-
    availability ? immediately available
    € 19% VAT excl. €525.21 € 19% VAT incl. €625.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Analogue Systems RS-215 Eight Octave Filterbank

    Filterbank module with eight fixed filter frequencies, each one octave apart. It is the successor of the RS-210 which was based on a rare 70ies filter bank from EMS. The newer version has different frequencies for a wider frequency range and the filter have a higher slope.

    Details
    Analogue Systems RS-215  Eight Octave Filter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €189.08 € 19% VAT incl. €225.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. Analogue Systems RS-230 CV Buffer

    The CV Buffer is a dual active multiples. With this module you can split signals without level loss. Besides that each unit has an inverted output so an inverter is included, too!

    Details
    Analogue Systems RS-230  CV Buffer--9-
    availability ? immediately available
    € 19% VAT excl. €91.60 € 19% VAT incl. €109.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. Analogue Systems RS-250 Trunk Line

    The RS-250 is basically only a faceplate with ten 3.5mm jacks not connected to anything, not even to each other. On the back all contacts are accessible to make your own solder connections.

    The module makes sense if you want to send e.g signals from your modular system to sockets located in the back of your case. This is a particularly convenient way to make semi-permanent connections to other devices, especially when your modular is installed in a closed rack. It also allows you to connect your modular´s audio outputs to a rackmount patchbay, effects units, or mixer

    Details
    Analogue Systems RS-250  Trunk Line
    availability ? will be ordered on request
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. Analogue Systems RS-260 Quantiser

    This quantiser module corrects voltages according to the chromatic semitone scale i.e. one Volt is divided into 12 voltage steps of same size (1/12 V). The input voltage will be adjusted to the next semitone step. This is handy when you want to play tonally with your sequencer, sample and hold or any voltage generator. Beyond this the RS-260 allows for transposition and has two operation modes.

    Details
    Analogue Systems RS-260  Quantiser--9-
    availability ? shortly avaliable
    € 19% VAT excl. €217.65 € 19% VAT incl. €259.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Analogue Systems RS-270 Converter

    This passive module is a handy converter between different connector formats: 6.35mm jack (1/4"), 3.5mm jack (1/8"), and phono (alias`RCA` or `cinch`) at channels 3 and 4.

    Details
    Analogue Systems RS-270 Adapter Converter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €74.79 € 19% VAT incl. €89.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. Analogue Systems RS-280 Divider

    The RS-280 is a divider module with a wide frequency range. It can be used to output either clocks with different divisors or sub-octaves of audio signals.

    Details
    Analogue Systems RS-280  Divider--9-
    availability ? shortly avaliable
    € 19% VAT excl. €138.66 € 19% VAT incl. €165.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Analogue Systems RS-290 Sampler / Delay

    Analogue Systems RS-290 Sampler/Delay is a voltage controlled delay and sampler module. Stunning 46.9khz, 16bit, 5.5 second long stereo echo and delay with user assignable control of MIDI, analogue clocks, triggers, and CV Calculates the correct delay time to the incoming tempo.

    Details
    Analogue Systems RS-290  Sampler/Delay--9-
    availability ? shortly avaliable
    € 19% VAT excl. €474.79 € 19% VAT incl. €565.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Analogue Systems RS-295 Expander

    Analogue Systems RS-295 expands the RS-290 sampler/delay by a MIDI interface and a second assignable controller.

    Details
    Analogue Systems RS-295  Delay Expander--9-
    availability ? shortly avaliable
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. Analogue Systems RS-300 CV-to-MIDI

    Unlike a MIDI/CV converter that converts MIDI data into control voltages, a CV-to-MIDI converter goes the other way: it is capable to generate MIDI messages from CV signals!

    The RS300 offers eigth fee programmable CV inputs that can produce note numbers or controllers. Note on/off commands, control changes and the generation of MIDI Clock is possible as well. Operation is pretty easy due to a big display and the unit even has memory.

    Details
    Analogue Systems RS-300 CV-to-MIDI
    availability ? shortly avaliable
    € 19% VAT excl. €503.36 € 19% VAT incl. €599.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Analogue Systems RS-310 Reverb/Chorus (Dual Bus)

    RS-310 is a Reverb/Chorus module with voltage control of dry / wet mix and the delay time. You can create flanger and chorus effects but also short echos and reverbs.
    Thanks to a new dual-bus concept, this circuit is fully compatible to Doepfer’s Eurorack standard.

    Details
    Analogue Systems RS-310  Reverb/Chorus--9-
    availability ? shortly avaliable
    € 19% VAT excl. €200.84 € 19% VAT incl. €239.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. Analogue Systems RS-340 Gate Delay

    A Gate Delay does what the name says: it can delay a trigger or gate signal. The RS-340 is a multi-mode gate delay that canoutput not only gates with adjustable length but trigger signals as well.

    Details
    Analogue Systems RS-340 Gate Delay
    availability ? shortly avaliable
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. Analogue Systems RS-350 Slew Limiter

    The RS-350 is a voltage controlled Slew Limiter that can be swithced on or off by a positive going gate signal which simplifies creation of TB303-like sequences.

    Details
    Analogue Systems RS-350  Slew Limiter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. Analogue Systems RS-360 Phase Filterbank

    The RS360 Vocal / Phase Filter contains three voltage controlled resonant multimode filters that are summed at the outputs. The low pass and high pass filters with a slope of -24db/octave whilst the band pass and notch filters work with -12dB slope. The module is suited for creating vocal-like sounds and formants.

    Details
    Analogue Systems RS-360  Phase Filterbank--9-
    availability ? immediately available

    Regular Price: €425.00

    Special Price: € 19% VAT excl. €273.11 19% VAT incl. €325.00

    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Analogue Systems RS-370 Polyphonic Harmonic Generator

    The mighty RS 370 Polyphonic Harmonic Generator can be used as a digital 6-voice additive polyphonic synthesizer and/or as a six-voice polyphonic MIDI/CV/Gate interface!

    Details
    Analogue Systems RS-370 Polyphonic Harmonic G.--9-
    availability ? shortly avaliable
    € 19% VAT excl. €915.97 € 19% VAT incl. €1,090.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Analogue Systems RS-375 PHG expander (additive synthesis)

    The expander module RS375 for the polyphonic harmonic generator RS370 is very recommended if you want to use the capabilities of additive synthesis. It allows you for controlling up to 24 harmonics in realtime via control voltages and 16 potentiometers for direct control. Alternately you can use it for control of envelope parameters.

    Details
    Analogue Systems RS375 Harm. Gen. Expander--9-
    availability ? shortly avaliable
    € 19% VAT excl. €427.73 € 19% VAT incl. €509.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. Analogue Systems RS-376 CV Expander for PHG

    Useful expander for the RS370 particularly for users who do not require the real-time additive synthesis capabilities of the RS375 module but want to take advantage of 4 extra CV inputs and 4 controller outputs

    Details
    Analogue Systems RS 376 PHG expander--9-
    availability ? immediately available

    Regular Price: €199.00

    Special Price: € 19% VAT excl. €83.19 19% VAT incl. €99.00

    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Analogue Systems RS-380 Modulation Controller (Dual Bus)

    This very useful module combines in 12HP four completely different sub modules: a voltage controlled LFO, a noise generator, a sample-and-hold type random generator and a VCA.
    Thanks to a new dual-bus concept, this circuit is fully compatible to Doepfer’s Eurorack standard.

    Details
    Analogue Systems RS-380 Multimodul--9-
    availability ? shortly avaliable
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  26. Analogue Systems RS-390 Echo

    Digital delay with 16-/ 24-Bit resolution, 46.9kHz sampling rate and a maximum delay time of 3 seconds. It offers one mono input and two separate outputs for creating ping-pong delays. Control voltages can modulate the delay time and the dry/wet mix as well.

    Details
    Analogue Systems RS-390  Echo--9-
    availability ? shortly avaliable
    € 19% VAT excl. €343.70 € 19% VAT incl. €409.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  27. Analogue Systems RS-400 Phaser

    Classic phase shifter with voltage control and an integrated LFO which you can tap. The phaser has four stages resulting in two notches in the frequency range only but a distinct sound.

    Details
    Analogue Systems RS-400 Phaser--9-
    availability ? shortly avaliable
    € 19% VAT excl. €226.05 € 19% VAT incl. €269.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  28. Analogue Systems RS-420 Octave Controller

    Multi functional octave controller module with CV buffering and an in-buit slew limiter for portamento effects. A perfect companion for sequencing applications as you can individualy change octaves of up to three VCOs and you can globally transpose them as well. But also in combination with voltage controlled LFOs the module is really great as you can easily double or halve etc. their frequencies for living modulations.

    Details
    Analogue Systems RS-420  Octave Controller--9-
    availability ? shortly avaliable
    € 19% VAT excl. €205.88 € 19% VAT incl. €245.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  29. Analogue Systems RS-430 Distortion

    Really good sounding distortion module with voltage control of distortion amount and the mix between dry and wet signal. The module is optimised to high level in a modular systems but you can process guitar signals as well.

    Details
    Analogue Systems RS-430  Distortion--9-
    availability ? shortly avaliable
    € 19% VAT excl. €200.84 € 19% VAT incl. €239.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  30. Analogue Systems RS-440 BBD Analogue Delay

    Analog Delay with bucket brigade device (BBD) technology, feedback and voltage control of delay time and dry/wet mix.

    Unlike digital delays, even the simple ones, a BBD delay has a considerably ssmaller bandwidth and the maximum delay time shorter. The longer the delay the more drastic the artifacts get. Despite those facts analogue Delays have their very own charme and can be used for several effects as you can create not only echos, chorus and flanger effects but even short reverbs and "spacy" sounds.

    Details
    Analogue Systems RS-440  BBD Analogue Delay--9-
    availability ? shortly avaliable
    € 19% VAT excl. €234.45 € 19% VAT incl. €279.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  31. Analogue Systems RS-450 CV Recorder

    The RS-450 is a multifunctional module for multi-channel recording of voltages, gates and trigger from external sources. This voltage sequences can be recorded in 10 memories and can be recalled at any time for live use.

    As the sampling frequency iof the RS-450 is high and the internal SD card is large enough it is also possible to record audio signals as well, just like with a sampler.

    Details
    Analogue Systems RS-450 CV Recorder--9-
    availability ? immediately available

    Regular Price: €1,390.00

    Special Price: € 19% VAT excl. €839.50 19% VAT incl. €999.00

    Excl. 19% VAT, Excl. shippingLieferzeit 1

  32. Analogue Systems RS-500e EMS filter

    Genuine EMS Synthi filter. This legendary filter can be switched between pre 1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the matrix. This module is made under license from EMS.
    Thanks to a new dual-bus concept, this circuit is fully compatible to Doepfer’s Eurorack standard.

    Details
    Analogue Systems RS-500e  EMS Filter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  33. Analogue Systems RS-510e EMS Trapezoid Generator (Dual Bus)

    The Trapezoid Generator module is made under license of the EMS and is a remake of the EMS envelope shaper known from VCS3, Synthi A and AKS. It is a very unique modulator which can be used as a trapeze or triangle shape LFO and/or a attack-hold-decay envelope generator. It's flexible, weird and totally different from an ADSR.
    For the real EMS feeling combine the 500e Filter with the 510 Trapezoid.
    Thanks to a new dual-bus concept, this circuit is fully compatible to Doepfer’s Eurorack standard.

    Details
    Analogue Systems RS-510e  EMS Trapezoidgenerator--9-
    availability ? shortly avaliable
    € 19% VAT excl. €259.66 € 19% VAT incl. €309.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  34. Analogue Systems RS-600 Performance Wheels

    The RS-600 Performance Wheels are backlit modulation and pitch bend wheels made of clear acrylic. They change colour as you move them and the modulation wheel LED flashes with intensity as it is moved showing the internal LFO frequency.

    Details
    Analogue Systems RS-600  Performance Wheels--9-
    availability ? shortly avaliable
    € 19% VAT excl. €217.65 € 19% VAT incl. €259.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  35. Analogue Systems to Eurorack adaptor cable

    Adaptor cable for connecting an Analogue Systems module to an Eurorack busboard.

    If your ASys module has one power socket on the module´s circuit boards then you found the right cable here. Click for details!

    Details
    Analogue Systems - Doepfer Adapterkabel--9-
    availability ? immediately available
    € 19% VAT excl. €6.72 € 19% VAT incl. €8.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  36. Analogue Systems to Doepfer adaptor cable (double)

    Adaptor cable for connecting an Analogue Systems module to an Eurorack busboard. If the power cable on your ASys module connects two circuit boards, then you found the right cable here. This is the correct cable for the modules RS35, RS95, RS95e and RS-230.

    Details
    Analogue Systems - Doepfer Adapterkabel f RS95e
    availability ? immediately available
    € 19% VAT excl. €9.24 € 19% VAT incl. €11.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  37. Cwejman ADSR-VC2 Dual-Envelope

    The ADSR-VC2 is a dual envelope generator with two identical, independent ADSR units which can be both triggered simultaneously by one single trigger due to a normalized jack. All parameters (attack, decay, sustain release and the output level) can be voltage controlled. Besides short A, D and R times a switchable characteristic of the attack for punchy and crisp envelopes, but also long envelope times are possible of course.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman ADSR-VC2
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €520.17 € 19% VAT incl. €619.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  38. Cwejman AI-2 Audio-Interface

    The Audio Interface AI-2 is a very helpful tool for converting unbalanced audio signals into balanced and vice versa. That is indispensable for making professional recordings in studio quality or for processing audio signals interference free in the studio or on stage.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman AI-2 audio interface--9-
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €281.51 € 19% VAT incl. €335.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  39. Cwejman AP-1 Audio-Processor

    The Audio Processor AP-1 is an indispensable module for everybody who wants to process external audio signals in modular systems. The AP-1 provides you with three sections. Pre-amp, envelope follower and compressor.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman AP-1 audio processor
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €557.14 € 19% VAT incl. €663.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  40. Cwejman ATT-4 Attenuator

    The ATT-4 is a fourfold attenuator with switchable offset. Its primary task is the attenuation of modulations in case CV inputs don't have their own attenuators. If set to to bipolar mode audio signals can also be attenuated.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman ATT-4 attenuator
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €221.85 € 19% VAT incl. €264.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  41. Cwejman BLD bass and drum module

    The BLD has all components and functions necessary for generating bass, lead and drum sounds but with focus on bass drum sounds. The BLD contains a main sound generator (Oscillator), a noise generator and modifiers such as low pass filter, amplifier and two transient (contour) generators.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman BLD Bass-Lead und Drum Generator
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €571.43 € 19% VAT incl. €680.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  42. Cwejman CRV-24 Audio Crossover

    The CRV-24 is a four band crossover with 24 dB/octave slope for all four bands. Crossover frequencies can be controlled manually and by attenuable CV signals.
    The input signal is split in four bands: LP (low pass filter) MID1 (high/low pass) MID2 (high/low pass) HP (high pass filter).

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman CRV-24 Audio Frequency Crossover
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €554.62 € 19% VAT incl. €660.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  43. Cwejman CTG-VC transient generator

    CTG-VC, a single complex voltage controlled transient generator. All parameters such as attack time, attack hold time, decay time, sustain level, release time and output level are voltage controlled.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman CTG-VC transient generator--9-
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €426.89 € 19% VAT incl. €508.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  44. Cwejman D-LFO

    Two identical, flexible LFOs with very innovative sync possiblities and an enormous frequency range. The cherry on top is the amplitude- and ring modulation between the LFOs. An interesting tool for generating extraordinary waveforms and also very suitable for those somewhat different FM sounds.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman D-LFO
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €519.33 € 19% VAT incl. €618.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  45. Cwejman DMF-2 Dual Mode/Slope Filter

    The DMF-2 module consists of two identical filters with two modes: lowpass and a quasi-bandpass which are available simultaneously at separate outputs. Each filter works selectively with different filter slopes and allows overdriven sound by saturation. By lots of in- and output combinations the module can be used as two independent filters or as a parallel dual filter.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman DMF-2
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €550.42 € 19% VAT incl. €655.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  46. Cwejman DP-2

    The Cwejman DP-2 is an entirely voltage controllable dynamic processor consisting of two function blocks: an "one-knob-action" compressor and a mute circuit connected in series.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman DP-2--9-
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €742.86 € 19% VAT incl. €884.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  47. Cwejman FSH-1 Frequency Shifter

    The FSH-1 module is a voltage controlled frequency shifter in studio quality. Unlike to other product on the market there is no bleedthrough of the internal oscillator and no audible noise! The signals can be up- and down-shifted; alternatively the module can be used as a high-quality ring modulator.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman FSH-1
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €571.43 € 19% VAT incl. €680.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  48. Cwejman INS-2MX Dual-Insert-VCA

    Dual voltage controlled cross-fade mixer. Main purpose is crossfading between original and effect-signal so the module is like an insert with a dry/wet control. But also normal cross-fading between two different sound sources is somehow possible.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman INS-2MX
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €390.76 € 19% VAT incl. €465.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  49. Cwejman MMF-2

    The module Cwejman MMF-2 is a stereo multimode filter. It can be used as a true stereo filter or like two independent filters. Besides the cwejman´esque clean sound the filter has a switchable saturation stage allowing you for creating distorted wild sounds. Lots of filter types, voltage controlled parameters and also the dry/wet parameter make this filter a complex tool for sound processing.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman MMF-2
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €869.75 € 19% VAT incl. €1,035.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  50. Cwejman MMF-6 Multi Mode Filter

    The Cwejman MMF-6 is a flexible multi-mode filter with six simultaneously available filter types at individual outputs. Besides the clear sound known from Cwejman the module also has "saturated" outputs for a nice nasty sound. Way cool!

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman MMF-6 Multi Output Filter--9-
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €537.82 € 19% VAT incl. €640.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  51. Cwejman MX-4S

    4-in-2 Mixer with voltage controleld level and panorama for each channel as well as voltage control over the stereo mix level. The module is built in studio quality and displays the mix level by 2 LED chains.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman MX-4S
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €655.46 € 19% VAT incl. €780.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  52. Cwejman NS-4 Noise-SampleHold-Lag

    The NS-4 features two modules in one. On the one hand a noise generator with different colors and on the other hand a sample & hold generator with an internal lag (= slew limiter) and internal LFO.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman NS-4
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €331.93 € 19% VAT incl. €395.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  53. Cwejman PH-4 4-Phase-Modulator

    The PH-4 is a LFO module with four outputs that are offset in phase 90° each. Unlike normal quadrature LFOs it generates not only a sine waves but also triangles.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman PH-4
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €394.12 € 19% VAT incl. €469.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  54. Cwejman RES-4 4-band-Resonator

    The RES-4 is a voltage controllable quad resonance filter. It bases upon Cwejman´s VC-EQ module but features explicitely greater parameter ranges and thus it is possible to create somewhat extreme sounds. An awesome module.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman RES-4
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €638.66 € 19% VAT incl. €760.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  55. Cwejman RG-6 Random Generator

    The RG-6 is Cwejman´s powerful module for generating various random signals. Available are three different stepped random voltages, a random gate, random clock and random sawtooths.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman RG-6 Random Generator
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €492.44 € 19% VAT incl. €586.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  56. Cwejman SPH-2 Spatial Phaser

    The module SPH-2 is a 14-stage stereo phaser with three audio outputs and many modulation options. The audio quality conforms to highest studio requirements! So far it is the phaser with the best sound and lowest noise.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman SPH-2
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €557.98 € 19% VAT incl. €664.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  57. Cwejman VCA-2P Stereo-Panning-Amp

    First-class panning VCA for blending one signal between two outputs with a control voltage. You can also use the module as two totally independent, separate VCAs. Furthermore the CVs controlling the amplitudes of the main VCAs can be CV modulated on their part, what increases dynamical possiblities even more.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman VCA-2P
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €408.40 € 19% VAT incl. €486.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  58. Cwejman VCA-4MX

    The VCA-4MX is a combo-module which besides being four independent premium VCAs also gives diverse mixing functions. Therefore you can also use the module as one 4-into-1-mixer or two 2-into-1-mixers. And of course you can also abuse it as four attenuators.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman VCA-4MX
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €444.54 € 19% VAT incl. €529.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  59. Cwejman VCEQ-3 Equalizer

    Three individual voltage controllable parametric equalizers in an amazing quality are the argument for this very special module by Cwejman. The characteristic can be switched from notch to bandpass for each Filter. Frequency, bandwidth and amplitude can be controlled via CV and/or per dedicated knobs individually for each band.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman VCEQ-3
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €497.48 € 19% VAT incl. €592.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  60. Cwejman VC-FCS Stereo Compressor

    The compressor module VC-FC is the stereophonic brother of Cwejman´s VC FC forward compressor. It´s the first of its kind because so far no manufacturer developed a fuly voltage controlled compressor, even more not in stereo! This gives completely new and very precise control possibilities eg. in connection with sequencers. The audio quality conforms to highest studio requirements!

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman VC-FCS
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €600.00 € 19% VAT incl. €714.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  61. Cwejman VCO-2RM Oscillator

    Two identic very warm and fat oscillators which remind us of the Oberheim Xpander. When compared to a Minimoog Voyager (with filter fully open) we and Vladislav Delay could hear NO difference between Moog and Cwejman! The internal pre-patched frequency modulation is also very nice, just turn the control and enjoy the brilliant sound without patching... One of our best sellers.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman VCO-2RM
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €570.59 € 19% VAT incl. €679.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  62. Cwejman VCO-6

    With the VCO-6 Cwejman offers an oscillator that gives you access to all waveforms simultaneously. Furthermore, besides exponenetial FM it offers linear FM, a feature that mayn people missed on the VCO-2RM. A specialty is the pulse width department having two pulses with individual PWM modulation and a sawtootch with PWM.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman VCO-6
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €418.49 € 19% VAT incl. €498.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  63. Cwejman VM-1 Voice-Module

    The Voicemodule VM-1 is for sure one of the best compact synthesizers in the upper upperclass as Cwejman just is making it: Knorky direct sounds and effects or just clear sounds and waves up to hardest noises or just thick basslines are possible and nearly selfunderstanding with just this module.

    We currently do not accept pre-orders for Cwejman products. If you are interested in this module, please use the availability notification. The number of Cwejman circuits is limited. Therefore, we recommend you to order online IMMEDIATELY when a module becomes available. Enquiries via e-mail or telephone are usually not fast enough. (More detailed information can be found on the product page.)

    Details
    Cwejman VM-1 voicemodule
    availability ? will be ordered on request

    This product cannot be reserved. Please use the email notification.

    € 19% VAT excl. €582.35 € 19% VAT incl. €693.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1
  64. Moog CP-251 controlprocessor

    The CP 251 Control processor could be described as a small modular system without a synthesizer. 8 modules make the generation and simple editing of various Control Voltages possible, especially optimised for flexible control of the Mooger Fooger modules. But this complex interface of sensible components could be even better used when one always has it by your side. The special mixer, additional hardware LFO and the Lag Processor are tools that every live set activist has missed at one point of his/her life! With its big Jacks and stable desktop design with sockets exclusively on top, and of course it?s decadent wooden side panels it is naturally a product of the modern Moog class.

    Details
    Moog CP-251 Control Processor
    availability ? will be ordered on request
    € 19% VAT excl. €335.29 € 19% VAT incl. €399.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  65. Endorphin.es - Furthrrrr Generator incl. Strong Zero

    The Furthrrrr Generator by Austrian manufacturer Endorphin.es is a complex completely analog oscillator inspired by the Buchla 259. The sound is obese and fat, has a tremendous bass but is gets much more complex by the plethora of features and makes the Furthrrr a top-notch oscillator with an extreme wide range of sonic possibilities.

    Details
    Endorphin.es Furthrrrr Generator
    availability ? immediately available
    € 19% VAT excl. €579.83 € 19% VAT incl. €690.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  66. Expert Sleepers - ES-3 Mk4

    The ES-3 Mk4 module converts, in a similar manner as the ES-1, control signals from a DAW (e.g. from software like Volta or Silent Way) to control voltages. Unlike the ES-1 it doesn´t use your audio interface´s analog outputs, but the optical output (ADAT Lightpipe). Just connect the ES-3 Mk4 and the audio interface via an optical cable. The outputs of the mk4 version are equipped with multicolor background lightning.

    Details
    Expert Sleepers ES-3 mk3 alu--9-
    availability ? coming soon
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  67. Expert Sleepers ES-5 Mk3 (ES-3 expander)

    The Expert Sleepers ES-5 is a Gate/Clock/Sync expansion module for the ES-3 (from version Mk2 on). The outputs of the mk3 version are equipped with multicolor background lightning.

    Details
    Expert Sleepers ES-5 expander for es3 mk2
    availability ? coming soon
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  68. Flame Chord Machine 2

    Musical genius – Flame’s Chord Machine 2 can extract chords with up to four voices from a single control voltage. 42 presets and 16 user-definable chords in first, second and third inversion serve as basis for such experiments. 54 pre-fabricated and 16 customizable scales allow musicians to create joyful as well as melancholic results. On top of that, the Chord Machine 2 features a well-equipped arpeggiator voice. It can be used as a quantizer as well. Thanks to modulation inputs, it is possible to quickly transpose notes and influence parameters via other modules. Configurations can be saved as part of a song list.

    Details
    Flame Chord Machine
    availability ? immediately available
    € 19% VAT excl. €276.47 € 19% VAT incl. €329.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  69. Fonitronik ADC Pattern Sequencer

    The mh11 ADC Pattern Sequencer is an eight-step sequencer for CV, trigger and gate signals. So far it´s like you would expect it to be... BUT:

    The rhythmicity of the sequencer can be controlled by the ADC section in an interesting way. The ON / OFF state of each step can be set manually or it can be determined by a value ( 1 or 0) that is decoded by the ADC´s pattern. Sounds complicated but it´s just unusual. See the description below.

    Details
    Fonitronik ADC Sequencer--9-
    availability ? will be ordered on request
    € 19% VAT excl. €239.50 € 19% VAT incl. €285.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  70. Fonitronik VC Modulator

    Fonitronik´s second Eurorack module ist a voltage controllable ring modulator with a very special and unique timbre. Clean frequency multiplication is not its domain because above a certain level the carrier signal gets rectified and this leads to a dirty sound.

    Details
    Fonitronik VC Modulator
    availability ? will be ordered on request
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  71. Vermona modular fourMulator

    The fourMulator is a quad digital, voltage controllable LFO with Tap-Tempo and LFO synchronisation to an external clock. Synchronisation to an adjacent LFO is possible as well and gives you the possibility to shift the LFO´s phase.

    Details
    Vermona modular FourMulator
    availability ? immediately available
    € 19% VAT excl. €310.08 € 19% VAT incl. €369.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  72. Vermona modular qMI 2 (Quad MIDI Interface)

    Vermona's qMI 2 module is a very flexible yet affordable MIDI/CV interface which can be up to four voice polyphonic. You can use it as four independent interfaces or in a mixed mode with simultaneous monophonic and polyphonic modes. Also it has an integrated MIDI to clock converter on three clock outputs with individually adjustable diviisors.

    Details
    Vermona modular qMI - Quad MIDI Interface
    availability ? immediately available
    € 19% VAT excl. €276.47 € 19% VAT incl. €329.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  73. Vermona TAI-4

    The TAI-4 by Vermona is a 2x2 channel audio interface module for balancing signals coming from the modular system and for un-balancing audio signals that are sent to the modular.

    Unlike other modules of that kind that work with electrical balancing, the TAI-4 has isolating transformers and thus features true balancing.

    Details
    Vermona modular TAI-4
    availability ? immediately available
    € 19% VAT excl. €276.47 € 19% VAT incl. €329.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  74. The Harvestman Lider Suboctave

    The Lider Suboctave is another cooperation with Vladimir Kuzmin, the russian ingenieur who invented the Polivoks synthesizer. The module formerly known as Kuzminorgel is a suboctave circuit from the "Lider" guitar effect pedal.

    Details
    The Harvestman Kuzminorgel
    availability ? will be ordered on request
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  75. The Harvestman - Malgorithm MkII

    The BigDaddy of all voltage controlled bit crusher modules, the Malgorithm is back! The revised MarkII version offers a much better audio quality with 48kHz sampling rate and 16Bit depth, illuminated buttons instead of the tedious toggle switches, a brand new wave shaper and all that comes in stereo!

    Details
    The Harvestman - Malgorithm MkII (front)
    availability ? will be ordered on request
    € 19% VAT excl. €281.51 € 19% VAT incl. €335.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  76. The Harvestman - Polivoks-VCF

    The first widely available modular release of the Polivoks filter circuit is an officially clone built on the basis of original russian spare parts.The -12dB filter has parrallel lowpass and bandpass outputs sounding somewhat nasty. Unlike the original here you have CV inputs which will ad to the filter's possibilities.

    Details
    The Harvestman Polivoks VCF--9-
    availability ? immediately available
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  77. The Harvestman - Polivoks VCG

    Harvestman´s second part of the cooperation with Mr. Vladimir Kuzmin, the inventor of the soviet vintage Polivoks synthesizer, is a sawtooth-based VCO from this machine in the Eurorack form factor.

    Details
    The Harvestman Polivoks VCG
    availability ? will be ordered on request
    € 19% VAT excl. €222.69 € 19% VAT incl. €265.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  78. Intellijel Designs Audio Interface II

    The Audio Interface is a two-channel input/output module for inserting external, balanced audio signals into the modular system respectively for sending balanced signals from the modular to your studio environment. Besides that the module has a level boost function and VU metering.

    Details
    Intellijel Designs Audio Interface II
    availability ? immediately available
    € 19% VAT excl. €239.50 € 19% VAT incl. €285.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  79. Intellijel designs Buffered Multiple

    The Buffered Multiple is... well, a buffered multiple. This means you have no loss in signal strength when splitting your signals thru this multiple

    Details
    Intellijel designs Buffered Multiple--9-
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  80. Intellijel designs Dixie 2

    The Dixie 2 module is an compact analog oscillator with amazing features. Only 6HP wide it can be a LFO as well, has an unbelievable tracking of 10 octaves (!) and more fetaures.

    The new version DIXIE 2 has a wider faceplate of 6HP and has now a skiff-compatible depth. The potentiometers are bolted to the faceplate and the distance between jacks is a little bigger.

    Details
    Intellijel designs Dixie 2--9-
    availability ? immediately available
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  81. Intellijel Designs Dr. Octature 2

    Doctor Octature can be used in two different ways. On the one hand it is a octature-LFO which means it´s a sinewave LFO with eight outputs, shifted 45° in phase to each other. On the other hand it is a lowpass filter with eight outputs. It´s design is similar to the analog filters from Roland.

    Details
    Intellijel Designs Dr.Octature 2
    availability ? immediately available
    € 19% VAT excl. €242.86 € 19% VAT incl. €289.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  82. Intellijel Designs - Metropolis

    Very intuitive eight-step sequencer inspired by the RYK-185 project. It shines with different trigger modes, glide, rest and skip per step, it has swing, a quantizer and a clock generator but the most wicked function is that each step can be repeated before proceeding to the next one. Combined with adjustable length per step you get an instant Techno generator! An awesome machine.

    Details
    Intellijel designs Metropolis
    availability ? shortly avaliable
    € 19% VAT excl. €503.36 € 19% VAT incl. €599.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  83. Intellijel Designs Passive Multiples

    The Intellijel PASSIVE MULT is a classic dual multiples module for splitting signals.
    Like the A-180 it has a 2x4 configuration but this module is only 2HP wide! That's much more practical than any 2HP blank panel!

    Details
    Intellijel designs passive Mult module
    availability ? immediately available
    € 19% VAT excl. €26.89 € 19% VAT incl. €32.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  84. Intellijel designs Plog

    The Plog is a 8HP wide logic module, a perfect tool for switching states, gates, triggers and clocks. Plog comprises two programmable logic sections (select one of six different 3 input boolean logic types) as well as a toggle flipflop and data flipflop block. All four sections are linked together via specially planned normallisations. It was primarily designet to create complex sequences eg. derived from a simple gate sequence or clock.

    Details
    Intellijel designs Plog--9-
    availability ? immediately available
    € 19% VAT excl. €189.08 € 19% VAT incl. €225.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  85. Intellijel designs Quad Inverter

    Intellijel Designs Quad CV Inverter contains four identical inverters in one tiny module.

    Details
    Intellijel designs Quad Inverter
    availability ? immediately available
    € 19% VAT excl. €63.03 € 19% VAT incl. €75.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  86. Intellijel designs Quadra

    The Intellijel QUADRA module is a quad function generator. Each of the four channels can be used as an envelope or as LFO.

    Details
    Intellijel designs quADra--9-
    availability ? immediately available
    € 19% VAT excl. €234.45 € 19% VAT incl. €279.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  87. Intellijel designs Quadra Expander

    This module expands the Quadra by Intellijel by voltage control inputs for modulating the attack and decay parameters.

    Details
    Intellijel designs quADra expander
    availability ? coming soon
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  88. Intellijel designs Triatt - triple attenuator

    The TriAtt is a triple active attenuator module with different modes of operation. It replaces the discontinued uAtt module

    Details
    Intellijel designs Triatt - triple attenuator--9-
    availability ? immediately available
    € 19% VAT excl. €79.83 € 19% VAT incl. €95.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  89. Intellijel Designs uFold 2

    Intellijels offensive of modules with the help of David G. Dixon continues. This neat module can fold waves, audio and control voltages.
    Classic wave folder & wave multiplier circuits have been analyzed mostly in respect to the sound quality with the result being a simple module with only a few parameters and a versatility range of timbres. In the version 2 the sound and the behaviour has been improved.

    Details
    Intellijel Designs ufold2--9-
    availability ? immediately available
    € 19% VAT excl. €138.66 € 19% VAT incl. €165.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  90. Intellijel designs Unity Mixer

    Dual 3:1 audio and CV mixer (up to three buffered inputs with a single buffered output)
    You can neither control the input nor the output levels. Output level equals sum of input levels.

    Details
    Intellijel designs Unity Mixer 2
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  91. Intellijel designs uStep v2

    The µStep is a 4HP dual trigger/gate sequencer for the space-conscious Eurorack system.
    Use this module for Beat/trigger sequencing (great for polyrhythms), Control of adsr/asr envelopes, Clock dividing, Swing Clock, Convert Gate to Trigger

    Details
    Intellijel designs uStep v2
    availability ? immediately available
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  92. Intellijel designs uScale v2

    Tiny yet powerful quantizer eurorack module with memory.
    Version V2 is now 6HP wide, has much bigger graphics  and has a skiff friendly depth. All jacks are located at the bottom and the shift input has an additional switch.

    Details
    Intellijel designs uScale v2 quantizer
    availability ? immediately available
    € 19% VAT excl. €205.88 € 19% VAT incl. €245.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  93. Intellijel designs uVCF

    State-variable multimoder filter that is very suitable for small portable systems because of it´s small width of 6HP only. The filter tracks well more than four octaves and generates a clean sine wave at self oscillation so you can use the module quite well as a sinewave oscillator.

    Details
    Intellijel designs uVCF
    availability ? immediately available
    € 19% VAT excl. €142.02 € 19% VAT incl. €169.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  94. Dave Jones Design - O´Tool Plus

    Das O'Tool von Dave Jones Design ist ein zweikanaliges Oszilloskopmodul mit LCD-Bildschirm, das darüberhinaus auch eine Vielfalt anderer Anwendungsmöglichkeiten bietet. Beispielsweise bietet es verschiedenste Pegelmessung von Signalen, Spektralanaylse, Tuning, BPM-Zähler und vieles mehr.

    Details
    Dave Jones Design - O´Tool Oscilloscope
    availability ? immediately available
    € 19% VAT excl. €284.87 € 19% VAT incl. €339.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  95. Kilpatrick Audio - K4815 Pattern Generator

    The K4815 can produce notes and varying control voltages for a wide range of musical applications. Unlike a step sequencer, where the player picks each note in a sequence, the K4815 creates sequences by combining a scale, a visual pattern (as shown on the display) and a sequence playback motion to determine the rhythms and notes that are actually played. Other parameters can adjust the note and sequence length, as well as the transposition, direction of playback, and so on.

    Details
    Kilpatrick Audio K4815 Pattern Generator--9-
    availability ? coming soon
    € 19% VAT excl. €293.28 € 19% VAT incl. €349.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  96. Kenton - Modular Solo (silver)

    Kenton’s Modular Solo is a high-end MIDI/CV converter with lots of nifty additional functions. The module looks like a Eurorack version of the Pro Solo. However, it offers some nice additional features like clock divisors and more flexible auxiliary outputs.

    Details
    Kenton Modular Solo  MIDI/CV interface
    availability ? immediately available
    € 19% VAT excl. €217.65 € 19% VAT incl. €259.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  97. MFB - Dual LFO

    The Dual LFO offers two identical yet independent voltage controllable LFOs. Both have CV inputs with attenuator and a reset input. Crossmodulation makes the module very interesting

    Details
    MFB Modul Dual LFO 1
    availability ? coming soon
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  98. MFB – HH/CY-522

    The HH/CY-522 is composed of three drum voices. In detail, closed hi-hat,open hi-hat and cymbal are available. The circuit design is based on instruments included in the MFB-522, Tanzbär and Tanzbär Lite. For using them in a modular environment, some extras were implemented. The module utilizes a metallic oscillator mix, consisting of several pulse waves, to create sound. Hi-Hats are shaped via a band-pass filter plus an envelope. To create cymbals, two band passes for attack and decay phase are employed. Their mixing proportion is adjustable. Instead of the internal oscillators, an external sound source can be used for the cymbal’s decay phase. The The HH/CY-522 responds dynamically to incoming trigger signals. Besides sequencers and MIDI/CV interfaces, the circuits can also be played using a drum pad, piezo element or dynamic microphone.

    Details
    MFB Modul Drum 07 - HiHat/Cymbal 522--9-
    availability ? immediately available
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  99. MFB - Drum-99 Stereo Mixer

    Drum-99 is an audio mixer with five channels. Each signal path comes equipped with level and panorama potentiometers. Two additional inputs (L / R) allow the user to link several modules. This way, it is possible to create a bigger mixing system.

    Details
    MFB Modul Drum 99 - Drum Stereo Mixer--9-
    availability ? immediately available
    € 19% VAT excl. €66.39 € 19% VAT incl. €79.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  100. MFB - VCA

    The MFB VCA offers three signal inputs and two outputs - one of each has an attenuator. The module has one special feature: the CV1's intensity can be modulated by CV2.

    Details
    MFB VCA 1
    availability ? immediately available
    € 19% VAT excl. €57.98 € 19% VAT incl. €69.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  101. Manhattan Analog - CVP

    The CVP combines several circuits for processing CV signals: an offset generator, a slew limiter and a polarizer. The output is dual and buffered which means you don't even need an active multiple.

    Details
    Manhattan Analog CVP--9-
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  102. Manhattan Analog - MA35 VCF/A

    The MA35 module is a combination of an analog VCF and a VCA. The filter section is based on the Korg35 filter as used in the legendary Ms-10 synthesizer. It is switchable between lowpass and highpass, has two audio inputs and creates the classic Korg sound i.e. it can sound from smooth to nasty. The VCA is a Korg circuit as well and is built with period (not original, hard-to-find) transistors and op-amps to keep the character as authentic as possible. This vintage-isation makes the module a little raw and noisy but in a very charming way.

    Details
    Manhattan Analog MA35 VCF/A--9-
    availability ? immediately available
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  103. Manhattan Analog - MIX

    The MIX module by Manhattan Analog is a very compact 3-into-1 mixer. It is primarily suitable for mixing audio signals.

    Details
    Manhattan Analog MIX--9-
    availability ? shortly avaliable
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  104. Malekko - Richter Anti-Oscillator

    The Anti-Oscillator is another module released in collaboration with Grant Richter from Wiard. This one is an analog VCO with waveshaping features.

    Details
    Malekko  Richter Anti-Oscillator--9-
    availability ? immediately available
    € 19% VAT excl. €234.45 € 19% VAT incl. €279.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  105. Malekko 8NU8R Attenuator

    Dual Attenuator with additional rectifier function.

    Details
    Malekko  8NU8R Attenuator--9-
    availability ? immediately available
    € 19% VAT excl. €71.43 € 19% VAT incl. €85.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  106. Malekko - Richter Envelator

    Another Wiard module in the Eurorack form factor is the Envelator.
    This unit is a classic AD function generator that can act as a attack/decay envelope generator, a attack/release envelope generator or as a LFO with an interesting delay function.
    Using the CV inputs for controlling the A/D times will create living modulations and the two pulse outputs allow for triggering other envelopes for instance.

    Details
    Malekko  Richter Envelator--9-
    availability ? immediately available
    € 19% VAT excl. €158.82 € 19% VAT incl. €189.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  107. Malekko - Richter Noise Ring

    The Noise Ring is a digital random voltage generator which can output quantised random voltages. Used at high clock rates it acts as a digital tone generator (similar to a noisy digital tone-wheel).
    Additionally there´s a internal clock generator with output plus an analogue white noise source.

    Details
    Malekko  Richter Noise Ring--9-
    availability ? will be ordered on request
    € 19% VAT excl. €234.45 € 19% VAT incl. €279.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  108. Malekko - Richter Oscillator 2

    By releasing this module Malekko presents a prevoiusly unreleased design of Grant Richter (Wiard). This one is a fully analog oscillator with phase modulation of square, triangle and sawtooth waves.
    Other than the Anti-Oscillator we have here a VCO with the classic waveforms. Version 2 has an improved design and a dedicated VCO/LFO switch.

    Details
    Malekko  Richter Oscillator 2--9-
    availability ? immediately available
    € 19% VAT excl. €234.45 € 19% VAT incl. €279.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  109. Moon Modular 511ac: Quad Voltage Controlled Gate Delay

    The M511ac QUAD GATE DELAY combines four voltage controlled gate delay circuits in one module, which delay the incoming gate signals in a range from ca. 1 ms up to 20 seconds.  Each delay unit hat its own pair of display LEDs.

    Details
    Moonmodular 511ac: Quad Voltage Controlled Gate Delay--9-
    availability ? shortly avaliable
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  110. Moon Modular M511c VC-ADSR

    Fully voltage controlled ADSR-envelope generator with a convenient trigger button and an internal VCA for controlling the output level.

    Details
    Moonmodular 511c: VC Envelope Generator--9-
    availability ? shortly avaliable
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  111. Moon Modular M525 Reversible Attenuator

    Das Modul beinhaltet vier identische aktive bipolare Abschwächer für Audiosignale und Steuerspannungen. So kann man Signale abschwächen oder regelbar invertieren. Dies ist ein unverzichtbares Modul wenn manche deiner Module keine Abschwächer an den Steuereingängen haben.

    Details
    Moonmodular 525: Reversible Attenuator--9-
    availability ? shortly avaliable
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  112. Moon Modular M526 Reversible Mixer

    Active, bi-polar three-channel mixer for audio signals and control voltages. The signals can be mixed positively and also phase inverted.

    Details
    Moonmodular 526: Reversible Mixer--9-
    availability ? shortly avaliable
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  113. Moon Modular 551: MIDI-CV interface

    The MoonModular 551 module is a fully-fledged converter from MIDI data to CV and gate voltages. Besides converting note number information and note on/of commands also other controllers will be converted into voltages.

    Details
    Moonmodular 551: MIDI-CV interface--9-
    availability ? shortly avaliable
    € 19% VAT excl. €178.99 € 19% VAT incl. €213.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  114. Moonmodular 552: Control Voltage to Midi Converter

    The Moonmodular 552 is a module whose four channels individually convert CV/gate information into MIDI signals.

    Details
    Moonmodular 552
    availability ? immediately available
    € 19% VAT excl. €250.42 € 19% VAT incl. €298.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  115. Moon Modular M553 Midi to Clock

    M553 Midi to Clock Converter . The M553 is a module, which converts a MIDI clock into analog clock and gate-signals, to synchronize, for example, analog step-sequencers to MIDI-hardware- or software-sequencers.

    Details
    Moonmodular 553: MIDI to Clock--9-
    availability ? shortly avaliable
    € 19% VAT excl. €132.77 € 19% VAT incl. €158.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  116. Moonmodular 554: Octal Clock Divider

    The 554 octal clock divider combines 8 divider circuits in one module. Each of the dividers offers twelfe division factors: 1 / 2 / 4 / 5 / 6 / 7 / 8 / 10 / 12 / 16 and 32.

    The input jacks are normallized to allow complex divider combiantions without external patching:

    Input 1 is daisy chained to Input 3, input 3 to inout 5, input 5 to in 7.

    Output 1 is daisy chained to input 2, out 3 to in 4, out 5 to in 6, out 7 to in8

    Eight individual outputs.

    5U module (dotcom and moog form factor), 2U wide. Poer connectors for dotcom and COTK

    Details
    Moonmodular 554: Octal Clock Divider--9-
    availability ? shortly avaliable
    € 19% VAT excl. €276.47 € 19% VAT incl. €329.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  117. Moon Modular M563 Trigger Sequenzer

    Four track trigger Sequencer Every track has its own poti to control the trigger pulse width. Per step there is a switch with the position on/off and reset. Because each track has one clock in, it is possible to use four differnt clocks. If this is not necessary, there is an built in clock generator.

    Details
    Moonmodular 563: Trigger Sequencer--9-
    availability ? coming soon
    € 19% VAT excl. €410.92 € 19% VAT incl. €489.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  118. Moon Modular M563E Trigger Seq Expander

    Expander module for the Moonmodular 563 trigger Sequencer with 32 trigger outputs. This expander gives you the possibility to output the trigger signal of each row and each step at a separate output jack.

    Details
    Moonmodular 563e: Trigger Sequencer Expander--9-
    availability ? shortly avaliable
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  119. Moon Modular M564 Seq Divider Switch

    564 Sequential Divider Switch is a combination of a sequential 4-to-1/1-to-4 bidirectional electronic switch with clock divider. Each switch has its own set-button for manual activitation, trigger input ( positive edge) and classic style indicator lamps.

    Details
    Moonmodular 564: Sequential Divider Switch--9-
    availability ? shortly avaliable
    € 19% VAT excl. €242.86 € 19% VAT incl. €289.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  120. Moon Modular M565 Quad Quantizer v3

    Four identical quantizer units in a single module. The module quantizes variable CVs into semitone intervals. A gate input makes possible to synchronise the quantising process to an external clock/triger/gate.

    The new version 3 can quantize bipolar voltages, has a range of 20 octaves and can be programmed!

    Details
    Moonmodular 565: Quad Quantizer v3--9-
    availability ? shortly avaliable
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  121. Moonmodular 565D Quantizer Controller

    The M 565 D Quantizer Controller allows to limit the output voltages generated by the M 565 v3 Quad Quantizer to any desired key, chord or note interval. Up to two 565D Controllers can be connected to one 565 v3 Quantizer.

    Details
    Moonmodular 565D Quantizer Controller--9-
    availability ? shortly avaliable
    € 19% VAT excl. €133.61 € 19% VAT incl. €159.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  122. Moonmodular 567 Universal Programmer

    The 567 Universal Programmer replaces the module 568P and it enables the user to save and recall settings from the 568 sequencer, the 565D quantizer controller and future modules.

    Details
    Moonmodular 567 Universal Programmer--9-
    availability ? shortly avaliable
    € 19% VAT excl. €149.58 € 19% VAT incl. €178.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  123. Moon Modular 568: Quad Sequencial Trigger Source

    The M 568 QUAD SEQUENTIAL TRIGGER SOURCE is an elaborated trigger sequencer. It features four tracks of trigger positions, each with 32 steps, which can be combined to one long sequence of up to 128 steps.

    Details
    Moonmodular 568:  QSTS Quad Sequencial Trigger Source--9-
    availability ? coming soon
    € 19% VAT excl. €990.76 € 19% VAT incl. €1,179.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  124. Moonmodular 568A: QSTS Assistant

    The module 568A is an addition module for the 568 Quad Sequential Trigger Source (QSTS). It expands the four trigger rows of the QSTS with a couple of useful functions you can choose for each row individually.

    Details
    Moonmodular 568A: QSTS Assistant--9-
    availability ? shortly avaliable
    € 19% VAT excl. €189.08 € 19% VAT incl. €225.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  125. Moon Modular M569 Stepsequencer

    Der M569 QUAD SEQUENTIAL VOLTAGE SOURCE ist ein Stepsequencer Modul in 5HE. Vier achtstufige Schrittsequenzern mit Spannungsreglern pro Schritt können per einfacher Umschaltung zu zwei Reihen a 16 Schritten oder einer Sequenz mit 32 Schritten verschaltet werden. Pro Reihe individuell als Event schaltbar: skip, stop oder reset. Interner Clockgenerator. Jede der vier Reihen kann aber auch se
    at geclockt werden. Pro Reihe ist auch die Ablaufrichting einstellbar: up/random/down. Pro Reihe ist die Maximalspannung zw. 2V, 5V oder 10V einstellbar, wobei 2V und 5V quantisiert ausgegeben werden.

    Details
    Moonmodular 569:  Quad Sequencial Voltage Source--9-
    availability ? coming soon
    € 19% VAT excl. €1,258.82 € 19% VAT incl. €1,498.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  126. Moonmodular 569EG: Gate Output Expander

    Four eight-step-sequencers with separate potentiometers per step can be chined together easily by a switch to two 16-step sequences or one 32-step sequence.

    Per row you can set a certain event: skip, top or reset.

    Internal clock generator. Each of the four rows can be clocked separately. Per row you can also set the running direction to up/random/down. Also, per row you can set the output voltage: 2V, 5V or 10V (2V and 5V are output qith quantisation)

    5U module in Moog form factor, six units wide (8.75" x 12.75" =  22,22cm x 32,4cm)

    Power connectors for COTK and .com.

    Details
    Moonmodular 569EG: Gate Output Expander--9-
    availability ? shortly avaliable
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  127. Moonmodular 569ES: Set Input Expander

    Four eight-step-sequencers with separate potentiometers per step can be chined together easily by a switch to two 16-step sequences or one 32-step sequence.

    Per row you can set a certain event: skip, top or reset.

    Internal clock generator. Each of the four rows can be clocked separately. Per row you can also set the running direction to up/random/down. Also, per row you can set the output voltage: 2V, 5V or 10V (2V and 5V are output qith quantisation)

    5U module in Moog form factor, six units wide (8.75" x 12.75" =  22,22cm x 32,4cm)

    Power connectors for COTK and .com.

    Details
    Moonmodular 569ES: Set Input Expander--9-
    availability ? shortly avaliable
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  128. Moon Modular M591 Quad Switch Matrix

    591 Quad Switch Matrix Router
    is a passiv module, where 2x4 output Jacks ( destinations) can be routed in pairs 2x4 signal inputs (sources) using four 6 way rotary switches with two off ? positions.
    This simple device is intended as a compain module to the M552 , but suitable for a multitude of appli8cations , where audio- and control signals have to be routed fast and with immediate visual feedbaxck. Use your imagination.

    Details
    Moonmodular 591: Quad Switch Matrix Router--9-
    availability ? shortly avaliable
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  129. Moonmodular 594: Multiples

    The M 594 Multiples contains three four-jack-multiples that are internally connected. By inserting a cable into the BREAK jack you can break up those normalizations and use the module as up to three separate multiples units.

    Details
    Moonmodular 594: Multiples--9-
    availability ? shortly avaliable
    € 19% VAT excl. €71.43 € 19% VAT incl. €85.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  130. Make Noise blank panel 1HP

    MakeNoise blank panel in 1 HP width (ca. 5mm).

    Details
    Make Noise blank panel 1HP--9-
    availability ? immediately available
    € 19% VAT excl. €3.15 € 19% VAT incl. €3.75
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  131. Make Noise blank panel 4HP

    MakeNoise blank panel in 4 HP (ca. 20mm)

    Details
    Make Noise blank panel 4HP--9-
    availability ? immediately available
    € 19% VAT excl. €4.12 € 19% VAT incl. €4.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  132. Make Noise blank panel 6HP

    MakeNoise blank panel in 6 HP width (30.5 mm).

    Details
    Make Noise blank panel 6HP--9-
    availability ? immediately available
    € 19% VAT excl. €4.20 € 19% VAT incl. €5.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  133. Make Noise - Brains

    BRAINS is a clocked sequential binary event machine, intended to be connected to tactile controllers.
    Or let´s just say it´s an sequencer expander for one or two Pressure Points by Make Noise which allows you to create a haptical three channel analogue sequencer with either four or eight steps, depending on the number of Pressure Points you use.

    Details
    Make Noise Brains (PP sequencer expander)--9-
    availability ? immediately available
    € 19% VAT excl. €100.00 € 19% VAT incl. €119.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  134. Make Noise - DPO

    Make Noise´s long-awaited DPO (Dual Prismatic Oscillator) is a dual analog VCO with plenty of internal modualtion possibilities, FM, a wave multiplier and other timbral controls. The main idea of primary and modulation oscillators with internal FM is based on Buchla´s 259 oscillator.

    Details
    Make Noise DPO--9-
    availability ? immediately available
    € 19% VAT excl. €567.23 € 19% VAT incl. €675.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  135. Make Noise - Echophon

    Awarded with the Electronic Musician 2013 Editor´s Choice Award!

    The Echophon flips the script on the trend of software based emulation of analog gear! Tony Rolando from MakeNoise and Tom Erbe from Soundhack prsent the Echophon, a DSP based Echo and Delay module for the Eurorack modular system. It is a digital echo with an unique pitch shifting alogorithm, smooth time modulation, tempo synchronisation and feedbacks with saturation. All parameters can be voltage controlled.

    Details
    Make Noise Echophon--9-
    availability ? immediately available
    € 19% VAT excl. €335.29 € 19% VAT incl. €399.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  136. Make Noise modDemix

    The modDemix consists of 2 identical direct coupled balanced modulator circuits that may be used together or individually to process audio or control signals. Usually you will use the module for amplitude modulation, single-side modulation, ring modulation, VCA, attenuation, polarization and multiplication.

    The new version (released late July 2014) has been changed regarding normalizations, is easier to use as a mixer and is more intutive due to clearer faceplate graphocs

    Details
    Make Noise modDemix - VCA / Ringmod / Mixer--9-
    availability ? immediately available
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  137. Make Noise - Optomix (Rev.2)

    The Optomix is a direct coupled, two channel low pass gate utilizing 4 vactrols to provide simultaneous voltage control over amplitude and frequency content of a signal. It is in essence, a VCFA.

    Additionally Optomix offers a summing stage complete with an AUXiliary IN allowing for the chaining of multiple units to create larger mixes.

    Details
    Make Noise Optomix--9-
    availability ? immediately available
    € 19% VAT excl. €189.08 € 19% VAT incl. €225.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  138. Make Noise - Phonogene (v.372)

    The Phonogene is a digital re-visioning and elaboration of the tape recorder as musical instrument, similar to a homonymous instrument by Pierre Schaeffer. although it´s not an emulation of this instrument it bases on the main ideas. It is informed by the worlds of Musique Concrète (where speed and direction variation were combined with creative tape splicing to pioneer new sounds) and Microsound (where computers allow for sound to be divided into pieces smaller then 1/10 of a second, and manipulated like sub-atomic particles). Having voltage control over every parameter, it is most successful as a digital audio buffer for the modular synthesist.

    Details
    Make Noise Phonogene (v.372)--9-
    availability ? immediately available
    € 19% VAT excl. €377.31 € 19% VAT incl. €449.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  139. Make Noise Pressure Points

    Pressure Points is a controller in which one of four sets of each three tuned voltages are selected by touching the corresponding printed copper wire at the bottom of the instrument. Touching Pressure Points, you become part of the circuit. In addition to the tuned voltages, a gate signal (Gate OUT) and a control voltage proportional to the amount of pressure applied (Press OUT), are generated when the module is touched. Up to 4 of these modules may be chained together to create controllers of varying size and complexity. Each of the Gate and Press OUTS are normalized to their respective SUM BUS which is output at the last Gate and Press OUT in the Chain.

    Details
    Make Noise Pressure Points--9-
    availability ? immediately available
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  140. Make Noise Pressure Points CHAIN CABLE

    The Chain Cable allows for chaining a number of Pressure Points modules in order to create a controller with more than four touch plates.

    Details
    Make Noise Pressure Points CHAIN CABLE--9-
    availability ? immediately available
    € 19% VAT excl. €4.12 € 19% VAT incl. €4.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  141. Make Noise - René

    René is the world's first and only Cartesian Sequencer for music synthesizers. Named for the French philosopher and mathematician René Descartes, it uses his cartesian coordinate system to unlock the analog step sequencer from the shackles of linearity.

    Details
    Make Noise René--9-
    availability ? immediately available
    € 19% VAT excl. €419.33 € 19% VAT incl. €499.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  142. Make Noise Wogglebug Mk2

    The Wogglebug: your personal monster for the modular system which can produce clocked stepped and smoothed random voltages, the ominous Woggle CV and featuring two oscillators that are controlled by random and finally the ringmodulated output of both VCOs. The module can be clocked externally but it has an clock generator and additionally a random gate burst generator, creating fast, short random pulses.

    The new version in black is smaller, has a stable clock, CV of influence parameter and some other minor changes, see below.

    Details
    Make Noise Wogglebug--9-
    availability ? immediately available
    € 19% VAT excl. €231.09 € 19% VAT incl. €275.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  143. Synthesis Technology - E355 Morphing Dual LFO

    The E355 is a dual wavetable LFO that can create ten thousand waveforms with the unique morphing technology as known from the Morphing Terrarium. The two LFOs are not entirely independent as LFO1 is rather the master LFO and the other can have the same frequency, waveform and/or phase, depending on the setting. All parametes are voltage controllable.

    Details
    Synthesis Technology E355 Morphing Dual LFO
    availability ? immediately available
    € 19% VAT excl. €242.86 € 19% VAT incl. €289.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  144. Synthesis Technology - E560 Deflector Shield

    The E560 is another unique DSP-based module that has no equal in the modular world, in any format. It is a triple-mode effects module: thru-zero frequency shifter, phaser and ring mod.
    What sets the E560 apart from it's colleagues is the unique carrier wave morphing feature. Traditional frequency shifters and phasers use sine waves as the carrier & modulator, but the E560 has 8 different carrier waves that can be continuously cross-faded to create never-before heard soundscapes.

    Details
    Synthesis Technology E560 Deflector Shield--9-
    availability ? will be ordered on request
    € 19% VAT excl. €335.29 € 19% VAT incl. €399.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  145. Synthesis Technology - E580 Resampling Mini-Delay

    The E-580 is a very nice and clean sounding digital delay module with resampling and different operating modes (clean, BBD and tape).

    Details
    Synthesis Technology E580 Resampling Mini-Delay--9-
    availability ? immediately available
    € 19% VAT excl. €335.29 € 19% VAT incl. €399.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  146. Metasonix R-60 Self-Tuning MIDI-CV Interface

    The R-60 is a MIDI/CV-interface that automatically sets itself up to the correct voltage characteristic to control a connected VCO over the maximum possible range, in perfect equal tempering. The R-60 doesn't care what the CV response of the VCO is - exponential, Hz/V, whatever - it will try to tune it to equal tempering anyway.

    Details
    Metasonix R-60 Self-Tuning MIDI-CV Interface--9-
    availability ? immediately available

    Regular Price: €485.00

    Special Price: € 19% VAT excl. €239.50 19% VAT incl. €285.00

    Excl. 19% VAT, Excl. shippingLieferzeit 1

  147. SB-Rail - 1000mm, with lid

    1m long aluminium rail for DIY-Eurorack cases wider than 19" - just cut the rail to the lenghth you need. The version with a lid featured here is well suited to be mounted on the front of the frame - read: for holding the modules in place. The modules sit on the lid and thus are properly aligned in a horizontal line.

    Details
    SB-rail - 1m, mit Kante--9-
    availability ? immediately available
    € 19% VAT excl. €18.49 € 19% VAT incl. €22.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  148. SB-Rail - 19", with lid

    Aluminium rail for constructing DIY-Eurorack cases. The version with a lid featured here is well suited to be mounted on the front of the frame - read: for holding the modules in place. The modules sit on the lid and thus are properly aligned in a horizontal line.

    Same type of rails is used in Doepfer´s G6 19" frame.

    Details
    SB-rail - 19", mit Kante--9-
    availability ? immediately available
    € 19% VAT excl. €7.56 € 19% VAT incl. €9.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  149. SB-Rail, 19", without lid

    Aluminium rail for DIY-Eurorack cases without a lid is well suited to be mounted in the mid or rear the frame e.g. for mounting Doepfer's busboard. But you might use it for mounting modules.

    Same type of rails is used in Doepfer´s  19" 6U frame.

    Details
    SB-rail - 19", ohne Kante--9-
    availability ? immediately available
    € 19% VAT excl. €6.72 € 19% VAT incl. €8.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  150. SB 3U rack ears for DIY Eurorack

    One 3U rack ear for DIY building 19" Eurorack cases.

    Details
    Haltewinkel f. 19" BGT 3 HE 1
    availability ? immediately available
    € 19% VAT excl. €3.36 € 19% VAT incl. €4.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

Items 151 to 300 of 1299 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction