Mungo Enterprises - s0 sampler / looper


The s0 is two in one: first a 16Bit sample player with three loop modes and variable sample start and loop point parameters. It reads .wav files from an SD card. Number two is a granular synthesis-based looper with audio input, various loop and trigger modes and reset/PLL-synchronization up to audio ranges.



Setting the sample start point happens manually and via CV. The loop width can be controlled only with the potentiometer.
A positive rising edge at the gate input triggers the sample which can be played tonally via the 1V/octave input.

The Granular Frequency can be set manually and via CV. The granular Width only via a control.
The audio signal is recorded fro mthe audio input; the reset input is used for re-setting the looper and for synchronising the playback.

The trigger button fires the sample and also activates the looper's loop mode.


With the optional Zoom expander module you can use all potentiometers (i.e. the parameter controls and the CV attenuators) of the Mungo modules with coarse, normal or very fine resolution. That is great for fine tuning frequencies or delay times. No matter how many Mungo modules you own, you need just one Zoom module.


SD card slot
- sampler: gate input, frequency CV input, audio output
- looper: audio input and output, reset input, granular frequency CV input


3U Eurorack module, 12HP wide, 36mm deep (50mm with Zoom cable)
current draw: 25mA @ ±12V each, 150mA @ +5V

0.2 kg
Article Number

This item is discontinued or sold out and no longer available, please feel free to look for comparable new stuff in the following categories.