Both of Double Andore MkII's sections are the same:
Similar to a a function generator you can use each as an attack-decay envelope, as an attack-sustain-decay envelope, as a slew limiter or as a LFO in Cycle mode. An assignable CV input accepts CVs from 0V to 5V and can be scaled with a polarizer.
The envelope's characterstic is set with the Shape parameter from logarithmic to exponential, with a potentiometer and CV.
There are two envelope outputs: a scalable one with bipolar attenuator and one with positive polarity and 0-7V level. The EOA/EOD socket emits pulses, either after finishing the Attack stage or the Decay stage; in LFO mode it's a square output with pulse width control.
Each section has a linear VCA which is internally connected to the envelope. The intensity of the envelope modulation can be set with a bipolar attenuator. The VCA features a signal input and a 0-8V CV input for modulating the amplitude. The VCA Drone fader opens the VCA manually. The level of a cross modulation between both VCAs is adjusted with the X-Mod potentiometer.
The VCA-OUT department gives oyu individual outputs for each VCA and a mix output. Which means the Doiuble Andore is two envelopes/LFOs, two VCAs and an output mixer. This is half of a synthesizer voice!
Compared to the precedessor the cross modulation range has been extended, the face plate got narrowed and a slew mode was implemented. Some functions are directly accessible.
Other features such as additional envelope stages, envelope mixing, and wavetable-based envelope curves shall become available in the future with a small expansion module.
- Envelope: input (0-10V), CV input (0-5V), Shape-CV input (0-5V), EOA/EOD output, variable output, 0-7V output
- VCA: signal input, CV input (0-8V), signal output
common Mix output
3U Eurorack module, 19HP wide, 42mm deep
Current draw 225mA.
This item is discontinued or sold out and no longer available, please feel free to look for comparable new stuff in the following categories.